• Journal of Environmental Science International
• /
• v.17 no.9
• /
• pp.957-968
• /
• 2008

The purpose of this study is to analyze the characteristics of hydraulic behavior of the natural channel flow according to the temporal classification mode, and thus propose the hydraulic analysis method for future channel design. For analysis, the temporal flow characteristics of the channel section was divided into the steady flow and the unsteady flow. For hydraulic analysis, the HEC-RAS model, which is a one-dimensional numerical analysis model, and the SMS-RAM2 model, which is a two-dimensional model, were used and the factors used for analysis of hydraulic characteristics were flood elevation and flow rate. The flow state was analyzed on the basis of the one-dimensional steady flow and unsteady flow for review. In the unsteady flow analysis the flow rate changed by $(-)0.16%{\sim}(+)0.26%$, and the flood elevation varied by $(-)0.35%{\sim}(+)0.51%$ as compared to the values in the steady flow analysis. Given these results, in the one-dimensional flow analysis based on the unsteady flow the flood elevation and flow rate were greater than when the analysis was done on the basis of the steady flow. The flow state was analyzed on the basis of the two-dimensional steady flow and unsteady flow. In the unsteady flow analysis the flow rate varied by $(-)0.16%{\sim}(+)1.08%$, and the flood elevation changed by $(-)0.24%{\sim}(+)0.41%$ as compared to the values in the steady flow analysis. Given these analysis results, in the two dimensional flow analysis based on the unsteady flow, the flood elevation and flow rate were greater than when the analysis was done on the basis of the steady flow.

• Journal of Environmental Science International
• /
• v.25 no.8
• /
• pp.1165-1176
• /
• 2016

The accuracy of digital elevation models (DEMs) is crucial for properly estimating flood inundation area. DEM pixel size is especially important when generating flood inundation maps of small streams with a channel width of less than 50 m. In Korea, DEMs with large spatial resolutions of 30 m have been widely applied to generate flood inundation maps, even for small streams. Additionally, when making river master plans, field observations of stream cross-sections, as well as reference points in the middle of the river, have not previously been used to enhance the DEM. In this study, it was graphically demonstrated that high-resolution DEMs can increase the accuracy of flood inundation mapping, especially for small streams. Also, a methodology was proposed to modify the existing low-resolution DEMs by adding additional survey reference points, including river cross-sections, and interpolating them into a high spatial resolution DEM using the inverse distance weighting method. For verification purposes, the modified DEM was applied to Han stream on Jeju Island. The modified DEM showed much better accuracy when describing morphological features near the stream. Moreover, the flood inundation maps were formulated with the original 30 m pixel DEM and the modified 0.1 m pixel DEM using HEC-RAS modeling of the actual flood event of Typhoon Nari, and then compared with the flood history map of Nari. The results clearly indicated that the modified DEM generated a similar inundation area, but a very poor estimate of inundation area was derived from the original low-resolution DEM.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.297-302
• /
• 2003

Recently, Flood hazard has been increased frequently in urban area by rainfall and Typhoon. To manage flood hazard effectively, it needs to construction of flood information management system. Especially, run-off by flood in urban area must be considered not only surface outflow by topographic gradient and elevation but also conduits outflow along conduit network. This paper suggests the flood hazard management system for analyzing flood outflow in urban area using conduits outflow simulation by ILLUDAS model and providing quickly flood hazard information using WebGIS and MobileGIS.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.6
• /
• pp.109-118
• /
• 2003

As a fundamental research to establish a safety operation plan for irrigation dams, this study presents hydrologic analysis conducted in Sungju Dam watershed based on various rainfall data. Especially those reservoirs without flood control feature are widely exposed to the risk of flooding, a safe and optimized operation program need to be improved against arbitrary flooding. In this study, reservoir routing program was developed and simulated for reservoir runoff estimation using WMS hydrology model. The model simulated the variations of reservoir elevation under the condition of open or closed emergency gate. In case of closed emergency gate, water surface elevation was given as 193.15 m, and this value exceeds the dam crest height by 1.65 m. When the emergency gate is open, the increment of water surface elevation is given as 192.01 m, and this value exceeds dam crest height by 0.57 m. As an alternative plan, dam height increase can be considered for flood control under the PMP (Probable Maximum Precipitation) condition. Since the dam size is relatively small compare to the watershed area, sound protection can be expected from the latter option rather than emergency gate installation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2687-2692
• /
• 2010

There have been performed many researched for flood magnitude analysis, for example, the Flood-Duration-Frequency relations in the west. Because flood water stage data are more available rather than flood amount data at flood gauge stations of Korea, this study developed Flood water level-Duration-Frequency (Fwl-D-F) curves using rainfall Intensity-Duration-Frequency(I-D-F) curves for the quantitative flood risk assessment in urban watersheds. Fwl-D-F curve is made from water level data for 18 years at Joongrayng bridge station of Joongrayng River basin in Han River drainage area. Fwl-D-F curve can estimate the occurrence frequency for a certain flood elevation, which can be used for urban flood forecasting. It is expected that the flood elevation can be estimated from the forecasted rainfall data using both Fwl-D-F and I-D-F curves.

• Journal of Wetlands Research
• /
• v.9 no.3
• /
• pp.25-34
• /
• 2007

We analyzed flood runoff and flood characteristics of an small urban river basin which is in an apartment complex in Yewol-Dong, Buchun-Si, Gyunggi-Do. This discharge normally flows a little by intercepting sewer and interception of pollutants. However in flood period it looks like risk of flood damage by high flood discharge and increase of flood elevation. After appling the analysis model on urban runoff, using the GIS data and cross section at the basin, and then we studied the degree of flood control safety at the basin through forecasting flood elevation. Eventually, there are the flood risks from the River structure for Multi-functional Urban river as well as the river safety. As flood runoff analysis in urban, we need to consider risks which are drainage depth and other.

• Journal of Industrial Technology
• /
• v.30 no.B
• /
• pp.83-89
• /
• 2010

Generally, the accuracy of the prediction of flood elevation is difficult to identify due to the sedimentation on a river bed, earth and sand being moved by flow, and localized torrential downpours caused by climate change. It is also because of natural and artificial influences on rivers. To predict river floodings successfully, more precise and reliable flood elevation prediction system is needed, in which the concentration time of downstream is numerically interpreted through analyzing and utilizing the watermark of the upper region. Therefore, this research analyzed the prediction methods of the changes in water levels, which use the watermarks of the upper region. The watermarks which impacts the spot being predicted of flood was selected through floodgate analysis and correlation analysis. With the selected watermarks, a statistically reliable regression equation was yielded.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.204-208
• /
• 2006

This study is to develop a distributed urban flood runoff model that simulates the road runoff and to test the applicability of the model by applying to Pyeongtaek city of $12.2km^2$. To generate the runoff along the runoff, agree burned DEM (Digital Elevation Model) with road networks was suggested and the proper spatial resolution of DEM was identified finer than 15 m. To test the model applicability, 32 points on the road networks were selected and the hydrographs of each point were generated. The test showed reasonable results that increase the road runoff from the high elevation roads to the low elevation roads and the road runoff considering rainwater drainage from the road also showed reasonable results.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.165-174
• /
• 2011

The purpose of this research is to develop the model for analyzing the hydraulic behavior of off-stream reservoir whose purpose is to reduce a peak flood. When a flood occurs in river, off-stream reservoir has a capability of sharing a part of peak flood. It is accomplished by flowing over a off-line weir that is built by lowering a portion of bank and connecting river with off-line reservoir. Since flood control depends on river elevation, characteristics of off-line weir (elevation, length, position et al.) and reservoir capacities, an integrated model linking the one dimensional unsteady river flow model, off-line weir model and two dimensional unsteady flood model is developed to analyze the behavior of off-stream reservoir and off-line weir. The results show that a flood control capability of off-stream reservoir strongly depends on facilities of off-line weir and storage capacity of offstream reservoir.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.203-206
• /
• 2007

In urban flood model, the features like roads, buildings, and river's banks have great effect on flow dynamics and flood propagation and it must be accounted for model set-up. Two-dimensional hydraulic models in high-density building areas are at the forefront of current research into flood inundation mechanisms, but they are however constrained by inadequate parameters of topography and friction due to insufficient and inaccurate data. This paper describes the development of urban flooding with the extraction of building areas and estimates the its influence on flood inundation extent, and present initial results of flood simulation varying grid size.