• Environmental Engineering Research
• /
• 제19권2호
• /
• pp.165-174
• /
• 2014

A model combining multi-dimensional discretized population balance equations with a computational fluid dynamics simulation (CFD-DPBE model) was developed and applied to simulate turbulent flocculation and sedimentation processes in sediment retention basins. Computation fluid dynamics and the discretized population balance equations were solved to generate steady state flow field data and simulate flocculation and sedimentation processes in a sequential manner. Up-to-date numerical algorithms, such as operator splitting and LeVeque flux-corrected upwind schemes, were applied to cope with the computational demands caused by complexity and nonlinearity of the population balance equations and the instability caused by advection-dominated transport. In a modeling and simulation study with a two-dimensional simplified pond system, applicability of the CFD-DPBE model was demonstrated by tracking mass balances and floc size evolutions and by examining particle/floc size and solid concentration distributions. Thus, the CFD-DPBE model may be used as a valuable simulation tool for natural and engineered flocculation and sedimentation systems as well as for flocculant-aided sediment retention ponds.

• 상하수도학회지
• /
• 제20권6호
• /
• pp.789-797
• /
• 2006

This study was conducted to establish the refined model for prediction of flocculation/sedimentation efficiency in factual drinking water treatment plants using model tree technique. In order to carry out machine leaning for determining each linear model, five parameters; time, coagulant dose, raw water turbidity, SCD and conductivity, which were measured and collected from the field (K_DWTP), were selected and used. The existing analytical models developed by previous researchers were used only to examine closely the mechanism of flocculation rather than to apply it for practical purpose. The refined model established using model tree technique in this study could predict the factual sedimentation efficiency accurately (below 9% of average absolute error). Also, in aspect of engineering convenience, without any additional manipulation of parameters, it can be applied to practical works.

• 상하수도학회지
• /
• 제14권4호
• /
• pp.337-342
• /
• 2000

In water treatment plants, open channel is used to distribute incoming flow to parallel treatment unit, such as flocculation basin and sedimentation basin. These control devices must be designed so that the incoming flow evenly distributed to the process unit. this is important in the view of optimizing process unit. In the recent past. significant insights into the sedimentation process have been developed. In this study, the 2-D computer program is developed to investigate fluid flow field and velocity vectors in flocculation sedimentation inlet distribution weir and calculate flow rates in each inlet weir. The specific purpose of this study is to analyze physical design factors, such as now rates, shape of channel, tapered angle in tapered type channel and main channel width.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.753-770
• /
• 2017

The coagulation or flocculation of cohesive clay suspensions is one of the most widely used treatment technologies for contaminated water. Flocculated clay can transport pollutants and nutrients in ground water. Coagulants are used to accelerate these mechanisms. However, existing coagulants (e.g., polyacrylamide, polyaluminum chloride) are known to have harmful effects in the environment and on human health. As an alternative, eco-friendly coagulant, this study suggests ${\varepsilon}-polylysine$, a cationic biopolymer fermented by Streptomyces. A series of sedimentation experiments for various ${\varepsilon}-polylysine$ concentrations were performed, and the efficiency of sedimentation with ${\varepsilon}-polylysine$ was estimated by microscopic observation and light absorbance measurements. Two types of sedimentation were observed in the experiments: accumulation sedimentation (at 0.15%, 0.20%, 0.25% ${\varepsilon}-polylysine$) and flocculation sedimentation (at 0%, 0.1%, 0.5%, 1.0%, 2.0% ${\varepsilon}-polylysine$). These sedimentation types occur as a result of the concentration of counter ions. Additionally, the performance of ${\varepsilon}-polylysine$ was compared with that of a previously used environmentally friendly coagulant, chitosan. The obtained results indicate that flocculation sedimentation is appropriate for contamination removal and that ${\varepsilon}-polylysine$ functions more efficiently for clay removal than chitosan. From the experiments and analysis, this paper finds that polylysine is an alternative eco-friendly coagulant for removing chemical contaminants in groundwater.

• 펄프종이기술
• /
• 제41권1호
• /
• pp.24-29
• /
• 2009

The use of fluorescent whitening agents (FWAs) increases as the demand for the whiter and brighter printing papers increases. FWAs are used as internal and surface treatment chemicals. FWAs that are not used properly in the papermaking process, however, remain in the process water and may demage the paper quality and processes. In this study, a new idea to eliminate FWAs from the process water, consisted of the floc formation of FWAs with cationic chemicals, such as cationic polyelectrolytes and alum, and the removal of the floc by screening or sedimentation, was proposed. Flocculation of FWAs, that is the first step to remove FWAs from the process water, was investigated using turbidity and particle size measurement. Relationship between turbidity and particle size showed that the turbidity could reflect the particle size change of FWA flocs and was proper for the evaluation of flocculation phenomena. Poly-DADMAC was more efficient than PEI to induce the flocculation of FWAs. Alum was effective chemical for the flocculation and sedimentation of FWAs.

• 공업화학
• /
• 제34권6호
• /
• pp.626-632
• /
• 2023

Acemannan, a highly acetylated glucomannan, was extracted from fresh Aloe vera leaves by ethanol fractionation, resulting in a concentration increase of more than threefold. The presence of acemannan was confirmed using FTIR and ¹H NMR analysis, revealing an average molecular weight of 780 kDa. The flocculating activity of the fractionated aloe gel polysaccharide was assessed through settling tests in a 1% (w/v) bentonite suspension. The results demonstrated that the aloe polysaccharide exhibited remarkable stability within a temperature range of 20~70 ℃. The maximal flocculation rate at different pH levels ranged from 93% to 97%, with an optimal dose for maximum flocculation rate between 0.25 mg/mL. Notably, the minimum dose required for flocculation was achieved at a pH of 3, attributed to the compression of electrostatic repulsion on the surface of bentonite particles. However, the flocs obtained under acidic conditions were less dense and compact, exhibiting lower sedimentation velocity compared to those formed under neutral and alkaline pH conditions. Additionally, the addition of salt showed a slight synergistic effect on flocculation, significantly enhancing the sedimentation velocity. This investigation highlights the potential of Aloe vera polysaccharide as a natural and edible flocculant, offering promising applications in various industries.

• Environmental Engineering Research
• /
• 제16권4호
• /
• pp.237-242
• /
• 2011

In this study, three pilot-scale plants with the capacity 30 $m^3$/day were designed and set up to treat reservoir water for the production of drinking water. Three treatment processes were compared in the pilot testing: process 1 (coagulation- flocculation- sedimentationsand filtration- ozone- BAC); process 2 (coagulation- flocculation- sedimentation- microfiltration-ozone- BAC); and process 3 (coagulation- flocculation- sedimentation- sand filtration- GAC). The quality of water has been evaluated on the basis of selected parameters such as turbidity, color, consumption of $KMnO_4$, dissolved organic carbon (DOC), trihalomethane formation potential (THMFP), geosmin and 2-MIB. A detailed assessment of performance was carried out during a five months operation. Process 2 was found to have better removal efficiency of DOC, THMFP, geosmin and 2-MIB than process 1 and process 3 under identical conditions, although the removal rate of color was found to be the same in the three cases.

• 상하수도학회지
• /
• 제25권4호
• /
• pp.597-604
• /
• 2011

This study was performed to compare finished water quality among three different processes. A detailed assessment of performance was carried out during the five months of operation. Finished water quality was evaluated on the basis of parameters such as Dissolved organic carbon (DOC), $UV_{254}$ absorbance, haloacetic acid formation potential (HAAFP), geosmin, 2-methylisoborneol (2-MIB), heterotrophic bacteria and total coliform bacteria. The treatment processes were Process 1 (coagulation-flocculation-sedimentation-sand filtration-ozone-GAC), Process 2 (coagulation-flocculation-sedimentation -microfiltration-ozone-GAC), and Process 3 (coagulation-flocculation-sedimentation- sand filtration-GAC), compared side by side in the pilot testing. Process 2 was found to have better removal efficiency of DOC, $UV_{254}$ absorbance, HAAFP and heterotrophic bacteria in comparison with process 1 and process 3 under identical conditions. Geosmin, 2-MIB and total coliform bacteria were not detected in finished water from each process.

• 유기물자원화
• /
• 제28권4호
• /
• pp.69-75
• /
• 2020

본 연구에서는 원형침전지의 고액분리 효율을 향상시키기 위해 응집제 없이 lab scale 침강장치에 교반속도(rpm)와 baffle 각도를 조절하여 생응집(bio-flocculation) 실험을 수행하였다. 피드 웰(feed wall)부분을 개량하여 baffle를 설치하고 각도(10°)를 고정한 후 각각의 교반속도(0.0rpm, 0.6rpm, 1.2rpm) 변화에 따른 실험 결과 교반속도 0.6ppm에서, 농축효율이 2.0%, 유출수(SS 농도) 제거효율은 7.8% 상승되는 것으로 분석되어 교반속도에 따른 슬러지의 생응집 효율 향상을 확인할 수 있었다. 또한, 침강장치 baffle의 각도를 변화시켜 슬러지 침강특성 영향을 분석한 결과 baffle 각도 20°에서 슬러지 계면층의 압축이 매우 높게 나타났다. 본 연구결과는 원형침전지의 침전 효율향상을 위한 기초 인자로 활용이 기대된다.

• 한국물환경학회지
• /
• 제28권3호
• /
• pp.367-374
• /
• 2012

A flotation process has a shorter processing time and needs less space than a sedimentation process. Dissolved air flotation process (DAF) is an efficient flotation method and used in a conventional wastewater treatment process. However, DAF requires the circulation of water containing compressed air and requires expensive installation and operation cost. Plasma Air Flotation (PAF) process is able to float flocs by micro bubbles generated from underwater plasma without the circulation of bubbly water and additional saturators. Therefore, PAF can be an alternative solution overcoming economic barriers. In this study, Humic acid removal efficiency by PAF process was compared with that of sedimentation process. 44.67% and 87.3% reduction rate based on UV 254 absorbance has been measured in sedimentation and PAF respectively. In particular, PAF in the flocculation zone can dramatically remove humic acid from water. In flocculation zone, PAF can separate organic matters but sedimentation cannot.