• 유변학
• /
• 제8권3_4호
• /
• pp.226-231
• /
• 1996

침강제에 의해 형성된 E. coli floc들의 강도를 측정하기 위해 floc 의 shear index를 측정하였다. 형성된 E. coli floc은 10/sec 같이 낮은 shear rate에서도 분쇄되거나 변형되었 다. 측정된 shear index의 감소에서 보듯이 E. coli floc의 강도는 염의 농도가 증가함에 EK 라 감소하였다. E. coli floc의 shear index는 NaCl의 농도가 0에서 100 mM로 증가함에 따 라 0.47에서 0.09로 줄었다. 발효배지의 조성에서 형성된 E. coli floc들은(shear index=0.18-0.24 with BPA-1000. 0.13-0.22 with BPA-1050 and 0.37-0.42 with BPA-5020) 염이 없을 때 형성된 floc에(shear index=0.47 with BPA-1000 and 0.46 with BPA-1050) 비 해 약하였다. 따라서 발효배지에서 형성된 floc은 생물공정 중 쉽게 shear에 의해 분쇄되거 나 변형될것이다.

• KSBB Journal
• /
• 제7권3호
• /
• pp.166-171
• /
• 1992

생물응집체 개발을 목적으로 Zoogloea ramigera115를 이용하여 균주배양 및 생물고분다 생성실험을 시시하였다. 다당류 최고 생성률을 얻을 수 있는 최적기질로 탄소원으로는 glucose, 질소원으로는 $NaNO_3$ 유기영양원으로는 yeast extract가 선택되었다. 초기 pH가 6일 때 가장 높은 세포성장과 점성을 나타내었다. 생성돈 생물고분자는 ultrasonication과 고속 원심분리를 거친 후 propanol 첨가에 의해 효율적으로 추출되었다. 생물고분자는 jae test에 의한 응집실험에서 높은 침강성을 보여 응집제 사용가능성을 확인하였다.

• 한국미생물·생명공학회지
• /
• 제21권5호
• /
• pp.486-493
• /
• 1993

A gram(+) bacteria that produced microbial flocculant was isolated from soil and classified as a Bacillus species and named as Bacillus sp. A56. The culture conditions of the strain for fluocculant production were studied in a shake flask. Optimum temperature and initial pH for flcculant production were 30C and 6.5, respectively. The optimized medium has gollowing composition: glucose 20g/l, NH4NO3 0.5g/l, K2HPO4 1.0g/l, KH2PO4 0.8g/l, MgSO4.7H2O 0.2g/l, MnSO4.4-6H2O 0.3g/l, CaCO3 0.5g/l, yeast extract 0.3g/l, tryptone 0.3g/l in tap water.

• 펄프종이기술
• /
• 제33권5호
• /
• pp.12-20
• /
• 2001

The consequence of water system closure and reduced water consumption in Paper Mills is increased white-water conductivity associated with increased total dissolved solids. This leads to difficulties man-aging the wet end chemistry of paper machines, mainly due to stearic hindrance effects on wet end chemical additives. This in turn causes poor productivity and Inefficient chemicals usage. The success of a number of projects is reported. The application and development of new multi-component micro-particle systems which can further assist in achieving a significant degree of system closure or Zero Effluent is described.

• 펄프종이기술
• /
• 제40권1호
• /
• pp.41-46
• /
• 2008

In this study, dewaterability, one of the important properties of wastewater sludge, was investigated using a simple capillary suction time (CST) measurement method. It turned out that one could use the results of CST to find optimum flocculants ratio to improve drainage in wastewater treatment for the printing paper, tissue paper, and newsprint paper mill. Since the optimum ratio of flocculants could be determined with the value of CST, COD removal efficiency could be improved and optimum floc strength could be achieved with precise ratio of flocculants. It was thus that using CST for determining the optimum ratio of flocculants could be economical by reducing the amount of flocculants. Dewaterability could be measured within several seconds using the values of CST in a precise way. The dewaterability could also be useful in investigating the optimum ratio of flocculants.

• 한국식품영양학회지
• /
• 제6권4호
• /
• pp.268-275
• /
• 1993

The whole cells of Actinoplanes missouriensis KCTC 1780 which produce glucose isomerase was immobillized by flocculation method for the effective production of high fructose syrup using packed-bed bioreactor system. Among the flocculation methods used In this study, the glucose Isomerase activity of flocculated cells using 5% polyethylenimmine and 0.2% glutaraldehyde was the highest as 46.3 unit, and the flocculant was 10.3g(wet weight) per 100m1 of broth, and the residual activity was 92.5%. In the batch operation of glucose isomerization using the flocculated cells, the optimum pH, temperature and isomerization ratio were 7.0, 75$^{\circ}C$ and 31%, respectively. The optimum concentration of Mg2+ which was activator on the glucose isomerization of flocculated cells was 0.1M, and glucose isomerase activity was increased by about 40% compared to none of Mg2+. In the packed-bed bioreactor system with 1.2 hour of residence time at 7$0^{\circ}C$, the reaction stability maintained until 96 hour without toss of activity, and the equilibrium was kept up to 120 hours of the operation.

• 공업화학
• /
• 제9권7호
• /
• pp.1043-1046
• /
• 1998

국내에서 상수원중의 부유물질 및 용존 유기물질의 제거를 위하여 사용하는 알루미늄계 무기응집제들은 응집처리 과정에서 노인성 치매의 한 원인으로 알려져 있는 알루미늄 이온을 상수원수에 잔류시킬 수 있으며, 상수의 탁도가 일시적으로 매우 높아질 때 효과적인 응집에 한계가 있다. 따라서 이들을 대신한 epichlorohydrine-dimethylamine(EPI-DMA) poly(amine)계 고분자 응집제가 선진국을 중심으로 사용이 되어 왔으며, 우리나라에서도 이것을 도입하기 위한 준비가 필요한 상태에 있다. 본 연구에서는 먼저 EPI-DMA poly(amine)계 고분자 응집제의 국산화를 위해 EPI와 DMA의 조성비를 달리하거나 또는 반응시간, 반응온도 등의 합성조건을 변화시키면서 이들의 합성조건에 대한 최적화 연구를 수행하여 대량생산을 위한 최적합성 조건을 구하였다. 그리고 이 과정에서 조건을 달리하여 얻은 각각의 고분자 응집제들에 대한 점도를 측정하여 합성 방법에 따른 고분자 응집제의 효율을 조사하였으며, EPI, DCP, DCIPA, 그리고 CPDO 등 유해 잔류물의 양을 Gas Chromatography(GC)에 의해 정량하였다.

• Applied Biological Chemistry
• /
• 제41권6호
• /
• pp.465-470
• /
• 1998

미생물이 생산하는 유기폐수처리용 생물응집제를 개발하기 위하여 보관균주 및 자연계로부터 100 units/ml 이상의 응집활성을 나타내는 응집제 생산균주를 1차로 분리하고 돈분폐수에서 가장 높은 제거율을 보인 KH-54를 최종 선별하였다. 선별된 균주는 Aeromonas hydrophila로 동정되었으며 응집제 생산을 위한 최적 배양조건은 2.0% mannitol, 0.05% ammonium chloride, 0.02% $KH_2PO_4$, 0.01% $MgSO_4{\cdot}7H_2O$, 0.05% yeast extract 조성의 배지와 초기 pH 7.0, 배양온도 $25^{\circ}C$ 및 교반속도 150 rpm 의 환경인자들이었다. 상기의 조건으로 4일 배양하였을 때 770 units/ml의 응집활성과 81%의 높은 nephelometer turbidity unit(NTU) 제거율을 나타내었으며 이 응집물질은 돈분폐수 이외 두부공업폐수 92%, 제당폐수 78%, 주정공업폐수 68% 및 항생물질 발효공업폐수 36%의 NTU 제거율을 각각 나타내었다.

• Environmental Engineering Research
• /
• 제12권1호
• /
• pp.21-29
• /
• 2007

For this study, we polymerized polyacrylamide base flocculants (PAA) and tested their properties and settling efficiency as a treatment for potable water. The most common chemicals for potable water treatment in Korea are alum or PAC. However, due to various reasons (such as rainy season or algae), inorganic flocculants cannot be solely depended on to solve all the problems caused by the poor quality of inflow water. When PAA coupled with coagulants in a potable water purification process is used, the turbidity removal efficiency increases by a factor of three on a single chemical system using PAC (Raw water: 5.21 NTU; Treated PAA+PAC: 0.34 NTU; and, Treated PAC: 1.04 NTU). It is possible to offset the toxic effect of residual monomers in treated water using PAA, because the concentrations of residual acrylamide are less than 400 mg/L in the polymer itself and less than $0.04\;{\mu}g/L$ in the treated water base at a dosage of 0.1 mg/L. Therefore, PAAs may be a workable, and dependable, potable water treatment process for the high pollutant level of resource water.

• 상하수도학회지
• /
• 제9권2호
• /
• pp.84-96
• /
• 1995

The dewatering characteristics of the sewage sludge was investigated through the experimental observations and model simulations. The activated sludge and the anaerobically digested sludge were examined for the dewaterability evaluation within the pressure range of $0{\sim}10^6N/m^2$. Modified Buchner funnel test and compression test by the consolidometer were conducted to evaluate average specific resistance, porosity, and moisture percentage of filter cake. Shirato's technique of compression-permeability test was followed for the pressure range lower than about $10^2N/m^2$. The flocculation effects on sludge dewatering was also examined for ferric chloride and polymeric flocculant. The application of hydrated lime which can be used for flue-gas desulfurization showed improved moisture percentage, and was thought to have positive feasibility in combined system of sludge dewatering and incineration. Determined characteristic constants were applied to Tiller's cake filtration model to simulate liquid pressure distribution and porosity distribution in cake. Model simulations showed a sharp drop of the porosity close to the cake-medium interface for the highly compressible material such as the activated sludge and the anaerobically digested sludge.