• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.2
• /
• pp.263-272
• /
• 2019

This study demonstrates the applicability of the FLO-2D for the influence analysis of the debris flow on expressway. To do this, the behavior of debris flow on the expressway was reproduced by applying the FLO-2D to actual generated debris flow. The study area is a part of the Deokyusan Service Area on the Daejon-Jinju Expressway, where traffic was blocked for 24 hours due to the debris flow in August 2005. Geographical analysis with GIS, hydrological analysis with HEC-HMS, and estimation of the amount of debris flow were carried out using field survey and soil property test data. Then, the optimum parameter combination of FLO-2D was selected through the parameter sensitivity analysis, and the behavior analysis of debris flow on expressway was applied. The comparison of the predictions with the observations shows the availability of FLO-2D for the behavior analysis of debris flow on the expressway.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.105-105
• /
• 2012

최근 우리나라는 집중호우로 인한 토석류의 발생이 현저하게 증가하고 있으며, 2002년 태풍 루사와 2003년 매미 그리고 2006년 7월 집중호우 등으로 인한 피해의 규모는 여러 조사와 문헌에서도 확인할 수 있다. 2011년 7월, 서울 우면산 일대에서는 집중호우로 인한 토석류가 발생하였으며, 16명의 인명손실을 포함한 큰 피해가 있었다. 우면산 토석류는 십여 개 지역에서 동시다발적으로 발생하였으며, 토석류 발생 유역 특성과 토석류의 유동특성을 분석하기 위한 현장 조사가 진행되었다. 조사한 자료에 따르면 우면산 일대의 일일 강우량은 서초 기상측정소를 기준으로 최대 24시간 누적 324mm 그리고 시간당 최대 68.5mm/hr를 기록하였다. 상업용 소프트웨어인 FLO-2D는 유사농도의 함수로서 점성(viscous)응력, 항복(yield)응력, 난류 및 분산(dispersive) 응력항을 포함하는 2차 유변학(quadratic rheology) 모델을 기본으로 사용하여 이류(mudflow)와 토석류(debris flow)를 모의할 수 있다. FLO-2D는 흐름의 운동량 및 에너지 보존을 고려하여 격자와 시간에 관계없이 유동심도, 속도, 압력을 예측할 수 있으며, 격자 기반의 모델로서 GIS 및 기타 응용 프로그램들과 연동이 쉽다는 장점이 있다. 그러나 하상침식에 의해 유발된 토석류의 체적 증가는 고려 할 수 없으므로 토석류의 전파 및 퇴적영역에서의 토석류 모의에만 사용할 수 있는 단점이 있다. 이 연구의 목적은 FLO-2D 소프트웨어를 이용하여 우면산에서의 토석류 현상을 재현하는 것이다. 우면산 일대에서 발생한 토석류 중 서초구 방배동의 래미안 아파트 부근에서 발생한 토석류에 대하여 수치지도(DEM)와 현장조사를 통해 얻은 지형자료, 해당 지역의 강우량 및 지질 특성 자료 등을 토대로 FLO-2D 모델을 적용하여 토석류의 흐름특성을 검토한다. 토석류 유동 및 퇴적에 대한 가용한 현장관측 자료와의 비교 분석을 통하여 토석류 특성 값을 산정하고, 모델의 적용성을 검증한다.

• Journal of Environmental Science International
• /
• v.31 no.9
• /
• pp.757-766
• /
• 2022

This study is to examine how well the hydrologic model reproduces the dam collapse. To do this, A hydrologic model FLO-2D is being operated to reproduce dam collapse with rainfall data and surface data in a small dam. In order to examine the performance of the model, the simulation was compared and reviewed with the data collected through the field survey. The results show that it takes about 2 hours to reach 1 km downstream. Inundation areas are about 188,640 m2 by the simulation and the difference from the field investigation is about 6.1%. Ten representative points were selected from the areas where the simulation and the field survey did not match. The discrepancy is less than about 0.08 m and does not appear to be significant. This study will present basic information on disaster preparedness operation and planning to minimize damage caused by sudden collapse of agricultural soil dams in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.965-974
• /
• 2013

Multiple debris flows occurred on July 27, 2012 in Mt. Umyeon, which resulted in 16 casualties and severe property demage. Accurate reproducing of the propagation and deposition of debris flow is essential for mitigating these disasters. Through applying FLO-2D model to these debris flows and comparing the results with field observations, we seek to evaluate the performance of the model and to analyse the rheological model parameters. Representative yield stress and dynamic viscosity back-calculated for the debris flows in the northern side of Mt. Umyeon are 1022 Pa and 652 $Pa{\cdot}s$, respectively. Numerical results obtained using these parameters reveal that deposition areas of debris flows in Raemian and Shindong-A regions are well reproduced in 63-85% agreement with the field observations. However, the propagation velocities of the flows are significantly underestimated, which is attributable to the inherent limitations of the model that can't take the entrainment of bed material and surface water into account. The debris flow deposition computed in Hyeongchon region where the entrainment is not significant appears to be in very good agreement with the field observation. The sensitivity study of the numerical results on model parameters shows that both sediment volume concentration and roughness coefficient significantly affect the flow thickness and velocity, which underscores the importance of careful selection of these model parameters in FLO-2D modeling.

• Journal of Environmental Science International
• /
• v.28 no.2
• /
• pp.259-266
• /
• 2019

Two main sources of data, meteorological data and land surface characteristics, are essential to effectively run a distributed rainfall-runoff model. The specification and averaging of the land surface characteristics in a suitable way is crucial to obtaining accurate runoff output. Recent advances in remote sensing techniques are often being used to derive better representations of these land surface characteristics. Due to the mismatch in scale between digital land cover maps and numerical grid sizes, issues related to upscaling or downscaling occur regularly. A specific method is typically selected to average and represent the land surface characteristics. This paper examines the amount of flooding by applying the FLO-2D routing model, where vegetation heterogeneity is manipulated using the Manning's roughness coefficient. Three different upscaling methods, arithmetic, dominant, and aggregation, were tested. To investigate further, the rainfall-runoff model with FLO-2D was facilitated in Yongdam catchment and heavy rainfall events during wet season were selected. The results show aggregation method provides better results, in terms of the amount of peak flow and the relative time taken to achieve it. These rwsults suggest that the aggregation method, which is a reasonably realistic description of area-averaged vegetation nature and characteristics, is more likely to occur in reality.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.229-229
• /
• 2022

우리나라의 지형 특성상 국토의 약 64%가 산지 지형이며 최근 10년 기준으로 연평균 강우량의 약 51%인 651.9mm가 여름철에 집중되고 있으며, 급격한 기후변화로 인한 집중호우와 태풍에 의한 영향으로 산사태와 토석류에 의한 생활권 주변의 도로나 주택가에 많은 피해를 발생시키고 있다. 따라서 무엇보다 토석류의 피해를 줄이기 위해 재해 발생 예상지역이나 피해 정도 및 규모에 대한 예측이 중요하며 이를 위해서는 토석류 수치모의를 통해 토석류의 피해지역을 예측할 필요가 있다고 판단된다. 본 연구에서는 태풍 미탁으로 인해 토석류가 발생한 강원도 삼척시 원덕읍을 대상으로 토석류 피해지역을 해석하기 위한 연구를 수행하기 위해 2차원 토석류 해석이 가능한 FLO-2D를 적용하여 토석류의 이동, 퇴적 및 하류부 피해해석을 수행하였다. 피해지역의 수치지도와 실측자료를 활용하여 지형자료를 구축하고 FLO-2D 모형을 이용하여 토석류 발생이 하류부에 미치는 영향을 분석하고 토석류 유동특성을 분석하여 피해지역의 실측자료와 비교분석하였다. 그 결과 모형을 통해 모의된 부분과 피해면적이 유사하게 나타났다.

• Journal of Environmental Science International
• /
• v.29 no.1
• /
• pp.15-23
• /
• 2020

The determination of soil characteristics is important in the simulation of rainfall runoff using a distributed FLO-2D model in catchment analysis. Digital maps acquired using remote sensing techniques have been widely used in modern hydrology. However, the determination of a representative parameter with spatial scaling mismatch is difficult. In this investigation, the FLO-2D rainfall-runoff model is utilized in the Yongdam catchment to test sensitivity based on three different methods (mosaic, arithmetic, and predominant) that describe soil surface characteristics in real systems. The results show that the mosaic method is costly, but provides a reasonably realistic description and exhibits superior performance compared to other methods in terms of both the amount and time to peak flow.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.112-112
• /
• 2015

우리나라는 산지가 국토의 64%이상으로 토석류 등 지반재해의 위험성에 노출되어 있다. 2011년 7월 우면산 토석류, 춘천시 펜션 토석류 등 규모가 큰 토석류 재해가 일어나며 문제가 되고 있다. 이에 본 연구에서는 토석류 피해지역을 연구지역으로 선정하고 지상 LiDAR스캔을 통한 현장조사로 연구지역과 유사한 매개변수 값을 산정하고 정밀도가 높은 지형자료를 생성하여 토석류 해석에 대한 정확도를 높혔다. 토석류 해석프로그램은 국내에서 토석류 해석에 많이 사용되는 FLO-2D와 아직 국내에서는 사용 빈도가 높지는 않지만 국외 연구사례에서 사용 빈도가 높은 모델 중 RAMMS 모형을 선정하여 토석류 피해가 발생한 동일 지역에 두 모형을 적용하고 그 적용성을 검토하였다.

• Journal of Environmental Science International
• /
• v.30 no.8
• /
• pp.613-619
• /
• 2021

Soil water enters the atmosphere via evapotranspiration, where it transforms into atmospheric water vapor and plays important role in the surface-atmosphere energy exchange. Soil conditions have a direct influence on the effective rainfall, and initial soil moisture conditions are important for quantitatively evaluating the effective rainfall in a watershed. To examine the sensitivity of the initial saturation to hydrologic outflow, a two-dimensional distributed FLO-2D hydrologic model was applied to a small watershed. The initial saturation was set to 0.3, 0.5, and 0.7 and the obtained results were compared. The Green-ampt model was chosen to calculate the penetration loss. Depending on the initial soil moisture, the peak flow rate varied by up to 60%, and the total water volume in the watershed by approximately 40%.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.169-177
• /
• 2018

There is a lot of loss of life due to natural disasters. In particular, flood damage caused by heavy rainfall in urban areas causes serious damage. Therefore, in this study, we conducted a study on the optimal evacuation route for safe evacuation of urban areas. We set up a methodology by reviewing Flo-2D model and A* algorithm. A Flo-2D model was used to derive the hazardous area, and we selected the starting points with many people and suggested ways to select safe evacuation sites. And the route was derived from the starting point to the safe evacuation point by using the A * algorithm. This study could be used not only for evacuation route but also for road maintenance and evacuation facilities.