• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.121-125
• /
• 2006

CFD has been used in aircraft development and broaden its influence in various fields of industries. This paper briefly introduces the historical trends of computing system, the overview of CFD applications in Korean Supersonic Trainer Development Program and the demand for CFD software in industry points of view.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.32-45
• /
• 2007

The T-50 advanced supersonic jet trainer employs the Relaxed Static Stability (RSS) concept to improve the aerodynamic performance while the flight control system stabilizes the unstable aircraft and provides adequate handling qualities. The T-50 flight control laws employ a proportional-plus-integral type controller based on a dynamic inversion method in longitudinal axis and a proportional type controller based on a blended roll system with simple roll rate feedback and beta-betadot feedback system. These control laws are verified by flight tests with various maneuver set flight envelopes and the control laws are updated to resolve flight test issues. This paper describes several concepts of flight control laws used in T-50 to resolve those flight test issues. Control laws for solving the roll-off problem during pitch maneuver in asymmetric loading configurations, improving the departure resistance in negative angle of attack conditions and enhancing the fine tracking performance in air-to-air tracking maneuvers are described with flight test data.

• 항공우주시스템공학회지
• /
• 제8권4호
• /
• pp.24-31
• /
• 2014

The modern version of aircrafts is allowed to guarantee the superior handing qualities within the entire flight envelope by imposing the adequate stability and flying qualities on a target aircraft through the various techniques of flight control law design. Generally, the flight control law of the aircraft in service applies the various techniques of the verified control algorithm, such as dynamic inversion and eigenstructure assignment. The supersonic trainer employs the RSS(Relaxed Static Stability) concept in order to improve the aerodynamic performance in longitudinal axis and the longitudinal control laws employ the dynamic inversion with proportional-plus-integral control method. And, lateral-directional control laws employ the blended roll system of both beta-betadot feedback and simple roll rate feedback with proportional control method in order to guarantee aircraft stability. In this paper, the lateral-directional flight control law is designed by applying dynamic inversion control technique as a different method from the current supersonic trainer control technique, where the roll rate command system is designed at the lateral axis for the rapid response characteristics, and the sideslip command system is adopted at the directional axis for stability augmentation. The dynamic inversion of a simple 1st order model is applied. And this designed flight control law is confirmed to satisfy the requirement presented from the military specification. This study is expected to contribute to design the flight control law of KF-X(Korean Fighter eXperimental) which will proceed into the full-scale development in the near future.

• 한국항공운항학회지
• /
• 제14권2호
• /
• pp.9-16
• /
• 2006

FAA AC120-40B Level D flight dynamics model for T-50 Full Mission Trainer was successfully developed. Since AC120-40B Level D requires the quantitative validation tests for simulation model compared with flight test data, T-50 flight test data for each validation test item was gathered, and also automatic test environments which include AFT (Automatic Fidelity Tester) and STA (Simulation Test Analyzer) were developed. The final test results after the iterative test-tuning processes were all within the tolerances specified in AC120-40B Level D. Qualification Test Guide, QTG contains the detail test processes and results.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.277-284
• /
• 2013

In this paper, the ventilating and heating system of T-103 trainer aircraft were investigated and redesigned to improve its poor performance. The ventilation system of the trainer was designed to increase the mass flow rate of fresh air by using air intake valves. The flow-in air through the air intake valve is supplied to the cabin by the ram effect of aircraft and the propeller. And the additional heating system was installed to improve the temperature of the cabin inside. The wasted heat from the exhaust gas of the engines was used as heat source of the additional heating system by installing an heat exchanger around the exhaust nozzle. The additional fresh air and the heated air enter the cabin via two ducts mounted under the instrument panel and behind the pedal in the cabin. The additional ventilating and heating system can be controlled by the first pilot and the secondary pilot individually using the control knob equipped separately. After mounting the additional ventilating and heating system, evaluations such as inspection of parts and component, ground run-up test, in-flight test, user test, etc. were conducted. The result of the tests was sufficient to meet the requirements of the manuals, and the pilots were satisfied with the additionally mounted systems.

• 항공우주시스템공학회지
• /
• 제9권2호
• /
• pp.19-24
• /
• 2015

Export basic trainer was designed to add armed configuration required by customer. Design configuration of main wing was changed to satisfy changed internal load caused by armed configuration. It was verified that design changed main wing airframe of export basic trainer satisfy the requirement through the structural detail analysis, structural ground test and flight test. This paper presents the durability test procensure and test result for the main wing of export basic trainer.

• 한국항공우주학회지
• /
• 제37권7호
• /
• pp.701-708
• /
• 2009

개발된 비행제어컴퓨터(DFLCC: Developed Flight Control Computer)의 비행제어법칙은 고등훈련기급 항공기의 시제 최종 형상의 비행제어소프트웨어(OFP: Operation Flight Program)를 기반으로 개발되었다. 비행제어법칙은 상용 개발 툴을 이용하여 GUI(Graphic User Interface) 환경에서 설계되며, C 코드로 변환되어 OFP 에 반영된다. 그리고 OFP는 정형화된 검증절차를 통하여 검증되는데, 검증과정을 거치기 전에 비실시간 환경에서 C코드로 변환된 비행제어법칙과 기반이 되는 비행제어법칙의 상사성(similarity)을 검증하고, 구성된 HILS(Hardware In-the-Loop Simulator) 환경의 신뢰성(reliability)을 사전에 검증하는 절차가 필요하다. 비행제어법칙의 상사성은 비실시간 환경에서 고등훈련기급 항공기의 시제 최종 버전의 비행제어법칙과 개발된 비행제어법칙의 응답특성을 상호 비교하여 검증된다. 또한, 구성된 HILS 환경의 신뢰성은 비실시간 시뮬레이션 툴을 기반으로 HILS 결과와 항공기 응답특성을 비교하여 검증된다. 본 논문에서는 항공기 응답을 직접 비교함으로써 개발된 비행제어법칙의 상사성과 HILS 환경의 신뢰성을 검증하였다.

• 한국항공우주학회지
• /
• 제34권11호
• /
• pp.70-75
• /
• 2006

조종실 여압시스템은 압력스케쥴, 압력조절 공차, 정상 및 비정상 작동시의 최대 압력변화율 및 조종실로 유입되는 최대 공기변화량과 같은 설계한계에 적절히 응답하도록 설계하여야 한다. 본 논문에서는 T-50 고등훈련기 조종실 여압시스템에 대한 압력강하 해석과 비행시험결과가 소개되었다. 압력강하 해석을 통하여 여압밸브의 출구면적을 계산한 후 무여압 구간에서의 압력공차를 예측하였다. 예측된 결과를 이용하여 D사의 여압부품을 선정하였고, 예측된 압력공차는 비행시험의 결과와 잘 일치하였다. 결론적으로 비행시험을 통하여 T-50 고등훈련기 여압시스템이 MIL-E-18927 설계기준을 만족하였다

• 항공우주시스템공학회지
• /
• 제14권2호
• /
• pp.12-19
• /
• 2020

In Korea, the regulation is MOLIT Notice 2018-290, Guidance for Approval of Synthetic Flight Trainer as Flight Simulator and Flight Training Device. The FAA (Federal Aviation Administration) categorizes FSTD (Flight Simulation Training Device) into FFS (Full Flight Simulator) and FTD (Flight Training Device), according to its level. Additional categories for regulation are airplane and helicopter, depending on the type of aircraft. In this study, the objective tests for the handling quality of the FAA and Korean regulations were compared and analyzed. In QPS (Qualification Performance Standard), related test titles, flight conditions, and tolerance limits were analyzed for the handling quality. Based on this study, recommendations on amendments to the regulation was presented.

• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.580-586
• /
• 2008

Icing cloud generation system was developed to perform the in-flight icing simulation test for T-50 Supersonic Jet Trainer on the ground. The developed system successfully generated the almost natural icing cloud in the super-cooled state (liquid state) below freezing point and with the required LWC (Liquid Water Content). For full-scale aircraft icing test, an icing scaling method was adopted due to the limitation of wind generation speed with open-circuit type blower and its applicability was experimentally verified. Under the required in-flight icing condition based on the icing scaling method, T-50 aircraft subsystems were successfully operated and functionally checked.