• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.22-31
• /
• 2013

Flight tests on flight control performance of helicopter, conversion and airplane mode for the Smart UAV were completed. Automatic take-off and landing, automatic return home as well as automatic approach to hover were performed in helicopter mode. Climb/descent, left/right turn using speed and altitude hold mode were performed in each $10^{\circ}$ tilt angle in conversion mode. The rotor speed in airplane mode was reduced to 82% from 98% RPM in order to increase rotor efficiency with reducing Mach number at tip of rotors. It reached to the designed maximum speed, $V_{TAS}$=440 km/h at 3 km altitude. This paper presents the flight test result on full envelopment of Smart UAV. Detailed test plan and test data on control performance were also presented to prove that all data meets the flying qualities requirement.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.41-48
• /
• 2013

When the ground subsystem of Ground Based Augmentation System(GBAS) is installed at the airport, the functions and performance of subsystem should be evaluated through ground and flight testing at the pre-commissioning phase. In the case of GBAS flight testing, it can be conducted by the existing flight check aircraft, but the GBAS ground testing requires the development of specially customized equipment to perform the ground testing. Therefore, this paper describes the preliminary design of GBAS onboard test equipment which can be independently used for the GBAS ground testing and flight testing on a car and an aircraft.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.6
• /
• pp.557-565
• /
• 2004

The Korean space program was marked by the successful launching of a KSR-III liquid propelled sounding rocket. The Inertial Navigation System (INS) which carries out critical mission functions of navigation, guidance and control was domestically developed and perfectly certified through the flight test. The system consists of a strapdown inertial measurement, an onboard computer and flight software. This paper will describes the development works of the inertial navigation system, including top level system design, hardware and software. And it summarizes flight results.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.4
• /
• pp.466-473
• /
• 2024

An Emergency Destruction System is inevitable for ensuring safety both at sea and in populated areas, particularly during emergency detonations triggered by abnormal missile flight or upon mission completion. This paper introduces a novel method for developing an Emergency Destruction System capable of precisely calculating the Instantaneous Impact Point(IIP) during high-speed, maneuverable long-range surface-to-air missile flight tests. The Emergency Destruction System designed for long-range surface-to-air missile flight tests generates impact position tables that meticulously incorporate wind errors and navigation equations based on the Earth's ellipsoidal model. Factors such as the Coriolis effect and the direction of the gravitational acceleration vector are accounted for, significantly enhancing the accuracy of IIP determination amidst highly variable missile speed and attitude.

• Transactions of the KSME C: Technology and Education
• /
• v.2 no.2
• /
• pp.113-124
• /
• 2014

In developing an aircraft, configuration determination and requirement proofing depend on flight test results. Since the flight tests require much time and high cost, systematic flight test planning and analysis are needed to reduce cost and development time. This paper presents a desirability function approach to present an integrative measure of vibration levels at important positions and suggests a fractional factorial design which is one of the experimental design methods to help perform systematic flight tests. A method to perform flight tests in stages is also suggested to further reduce the number of flight tests.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.1
• /
• pp.120-131
• /
• 2016

The full results of troubleshooting process related to the flight control system of a tilt-rotor type UAV in the flight tests are described. Flight tests were conducted in helicopter, conversion, and airplane modes. The vehicle was flown using automatic functions, which include speed-hold, altitude-hold, heading-hold, guidance modes, as well as automatic take-off and landing. Many unexpected problems occurred during the envelope expansion tests which were mostly under those automatic functions. The anomalies in helicopter mode include vortex ring state (VRS), long delay in the automatic take-off, and the initial overshoot in the automatic landing. In contrast, the anomalies in conversion mode are untrimmed AOS oscillation and the calibration errors of the air data sensors. The problems of low damping in rotor speed and roll rate responses are found in airplane mode. Once all of the known problems had been solved, the vehicle in airplane mode gradually reached the maximum design speed of 440km/h at the operation altitude of 3km. This paper also presents a comprehensive detailing of the control systems of the tilt-rotor unmanned air vehicle (UAV).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.10
• /
• pp.1012-1019
• /
• 2010

In this paper, The flight data processing system was designed for multiple target flight test. For flight data processing, multiple target grouping, data fusion processing, and data slaving processing were performed and, as a data fusion filter, centralized, and federated Kalman filters were designed. A centralized kalman filter was modified in order to improve the vehicle's low altitude measurement using radar's SNR and estimation process. From the testing of multiple target missile, it confirmed flight trajectory measurement was improved in low altitude area and the beginning stage of vehicle.

• Bulletin of the Korean Space Science Society
• /
• 2006.04a
• /
• pp.117-120
• /
• 2006

HAUSAT-2 flight software was developed by first analyzing the satellite requirements, and incorporating the results into the software. Coding and compiling is done after the software is completed, then individual and integrated tests are performed in order to verify the flight software algorithm. Currently, HAUSAT-2 flight software integrated test has been performed and the test result is serving as a basis for code modification nd additional developments. This paper describes the architecture, development process, and development environment of HAUSAT-2 flight software.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.3
• /
• pp.25-32
• /
• 2011

In order to study the effect of K-WAIS and FTD on flight aptitude, which we utilize to sort out good pilot candidates among applicants, we adopted Fuzzy regression model and expressed the result of flight aptitude tests in Fuzzy number by using maximum/minimum values and mean values. The 7 aspects of K-WAIS were broken down into three similar groups: mathematical ability, visualization ability and organization ability. While mathematical ability and organization ability showed a positive relevance with the FTD test with respect to flight aptitude, visualization ability of K-WAIS showed a negative(-) relevance with flight aptitude, which presented an opposite result to the previous research. Thus, we are to increase the number of samples and do the research thereof in the near future.

• Journal of Korean Society for Quality Management
• /
• v.49 no.3
• /
• pp.255-268
• /
• 2021

Purpose: We sought to understand why a high-speed rotating projectile featuring a fuze-and-body assembly sometimes exhibited airburst, and we intended to improve the flight stability by eliminating airburst. Methods: We performed characteristic factor analysis, structural mechanics modeling, and dynamic modeling and simulation; and we scheduled firing tests to discover the cause of airburst. We used a step-by-step procedure to analyze the reliability function for selecting the bonding force standard that prevents airburst. Results: The 00MM high-speed rotating projectile features a fuze bonded to a body assembly; the bonding sometimes can break on firing. The resulting contact force, vibration and roll damping during flight generated yaw. Flight became unstable; fuze operation triggered an airburst. Our reliability test improved the bonding force standard (the force was increased). When the bonding force was at least the minimum required, a firing test revealed that airburst/flight instability disappeared. Conclusion: Analysis and identification of the causes of flight instability and airburst render military training safer and enhance combat power. Ammunition must perform as designed. Our method can be used to set standards that improve the performances of similar types of ammunition.