• 콘크리트학회논문집
• /
• 제14권6호
• /
• pp.1032-1039
• /
• 2002

폐유리병을 콘크리트용 재료로서 재활용하는 것은 환경적으로나 경제적으로 큰 이점을 가지고 있어 미국ㆍ일본 등지에서는 이미 폐유리에 대한 재활용이 광범위하게 진행되고 있으며, 폐유리의 가공설비 및 시공기술도 상당한 기술축적이 이루어져 있다. 그러나 국내의 경우 폐유리를 사용한 콘크리트의 역학적 특성에 관한 실증적 자료는 전무한 실정이다. 본 연구에서는 폐유리 혼입률(잔골재 대체비 20vo1.%, 40vo1.%)과 강섬유 혼입률(0.5~ 1.5vol.%)에 따른 콘크리트의 역학적 특성을 분석하였다. 연구결과 폐유리를 사용한 강섬유보강 콘크리트의 워커빌리티는 폐유리 및 강섬유 혼입률이 증가할수록 감소하는 경향을 나타내었으며, 폐유리를 혼입한 콘크리트의 인장강도, 휨강도 및 휨인성은 강섬유 혼입률이 증가할수록 크게 증대됨을 확인하였다. 이들 시험결과로부터 적정 강섬유와 폐유리 혼입량은 각각 1.0vol.%와 20vo1.%로 판단된다.

• 한국건축시공학회지
• /
• 제17권1호
• /
• pp.9-14
• /
• 2017

본 연구에서 비정질 붕소강 섬유를 혼입한 콘크리트의 역학적 성능 및 중성자 차폐성능을 평가하였다. 비정질 붕소강 섬유를 콘크리트 체적 대비 0.25%에서 1.0%까지 혼입하여 굳지 않은 콘크리트의 공기량과 슬럼프값, 경화된 콘크리트의 압축강도, 휨강도, 휨인성 및 중성자 차폐성능을 평가하였다. 실험결과, 비정질 붕소강 섬유의 혼입량이 증가할수록 콘크리트의 휨인성 및 중성자 차폐성능이 향상되는 것으로 나타났다. 이를 통해 비정질 붕소강 섬유의 혼입이 중성자 차폐성능 뿐만 아니라 역학적 성능을 효과적으로 개선시켜 줄 것이라고 기대된다.

• Advances in concrete construction
• /
• 제16권3호
• /
• pp.127-139
• /
• 2023

In this study, the steel fiber and the polypropylene fiber were used to enhance the mechanical properties of fully recycled coarse aggregate concrete. Natural crushed stone was replaced with recycled coarse aggregate at 100% by volume. The steel fiber and polypropylene fiber were used as additive material by incorporating into the mixture. In this test two parameters were considered: (a) steel fiber volume ratio (i.e., 0%, 1%, 1.5%, 2%), (b) polypropylene fiber volume ratio (i.e., 0%, 0.1%, 0.15%, 0.2%). The results showed that compared with no fiber, the integrity of cubes or cylinders mixed with fibers after failure was better. When the volume ratio of steel fiber was 1~2%, the width of mid-span crack after flexural failure was 5~8 mm. In addition, when the volume ratio of polypropylene fiber was 0.15%, with the increase of steel fiber content, the static elastic modulus and toughness of axial compression first increased and then decreased, and the flexural strength increased, with a range of 6.5%~20.3%. Besides, when the volume ratio of steel fiber was 1.5%, with the increase of polypropylene fiber content, the static elastic modulus decreased, with a range of 7.0%~10.5%. The ratio of axial compression toughness first increased and then decreased, with a range of 2.2%~8.7%. The flexural strength decreased, with a range of 2.7%~12.6%. On the other hand, the calculation formula of static elastic modulus and cube compressive strength of fully recycled coarse aggregate with steel-polypropylene fiber was fitted, and the optimal fiber content within the scope of the test were put forward.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권5호
• /
• pp.48-59
• /
• 2021

본 연구에서는 다른 재료특성을 갖는 강섬유 또는 탄소섬유만을 사용한 단일 섬유보강 모르타르(fiber-reinforced mortar, FRM)와 강 및 탄소 섬유를 혼합사용한 하이브리드 FRM의 압축·휨성능을 조사하기 위해 실험을 수행하였다. 모르타르 시편은 총 섬유혼입률 1.0%에서 부피에 의한 1+0%, 0.75+0.25%, 0.5+0.5%, 0.25+0.75% 및 0+1%의 혼합비율로 강섬유와 탄소섬유를 혼입하였다. 이들의 역학적 성능을 재령 28일에서 섬유가 없는 플레인 모르타르와 비교, 검토하였다. 모르타르의 실험결과는 강섬유 0.75% + 탄소섬유 0.25%를 혼합사용한 하이브리드 FRM가 가장 높은 압축강도와 휨강도를 나타내, 하이브리드 FRM의 시너지 보강효과를 확인할 수 있었다. 반면, 강섬유 0.5% + 탄소섬유 0.5%를 혼합사용한 하이브리드 FRM의 경우 가장 높은 휨인성을 얻었으며, 본 실험결과를 토대로 강도와 휨인성을 동시에 개선하기 위한 하이브리드 FRM의 최적의 섬유 혼합비율을 제시하였다. 게다가, FRM 시편의 이미지 분석을 위해 주사전자현미경(scanning electron microscope, SEM)을 통해 파단면을 관찰하였다. 이들 결과는 시멘트 매트릭스 내에서 하이브리드 보강섬유의 이미지 분석을 하는 데 큰 도움이 되었다.

• 한국농공학회지
• /
• 제31권3호
• /
• pp.81-91
• /
• 1989

The aims of this study were to determine mechanical properties of steel-fiber reinforced concrete under splitting tensile, flexural and compressive loading, and thus to improve the possible applications of concrete. The major factors experimentally investigated in this study were the fiber content and the length and the diameter of fibers. The major results obtained are summarized as follows : 1.The strength, strain, elastic modulus and energy obsorption capability of steel-fiber reinforced concrete under splitting tensile loading were significantly improved by increasing the fiber content or the aspect ratio. 2.The flexural strength, central deflection, and flexural toughness of steel4iber reinforced beams were significantly improved by increasing the fiber content or the aspect ratio. And flexural behavior characteristic was good at the aspect ratio of about 60 to 75. 3.The strength, strain, and energy absorption capability in compression were increased with the increase of the fiber content. These effects were not so sensitive to the aspect ratio. The energy absorption capability was improved only slightly with the increase of the fiber length. 4.The elastic modulus, transverse strains, and poisson's ratios in compression were not influenced by the fiber content. 5.The steel-fibers were considered to be appropriated as the materials covering the weakness of concrete because the mechanical properties of concrete in tension and flexure were significantly improved by steel-fiber reinforcement.

• International Journal of Concrete Structures and Materials
• /
• 제11권2호
• /
• pp.365-375
• /
• 2017

An experimental evaluation of crack propagation and post-cracking behavior in steel fiber reinforced concrete (SFRC) beams, using full-field displacements obtained from the digital image correlation technique is presented. Surface displacements and strains during the fracture test of notched SFRC beams with volume fractions ($V_f$) of steel fibers equal to 0.5 and 0.75% are analyzed. An analysis procedure for determining the crack opening width over the depth of the beam during crack propagation in the flexure test is presented. The crack opening width is established as a function of the crack tip opening displacement and the residual flexural strength of SFRC beams. The softening in the post-peak load response is associated with the rapid surface crack propagation for small increases in crack tip opening displacement. The load recovery in the flexural response of SFRC is associated with a hinge-type behavior in the beam. For the stress gradient produced by flexure, the hinge is established before load recovery is initiated. The resistance provided by the fibers to the opening of the hinge produces the load recovery in the flexural response.

• Computers and Concrete
• /
• 제24권4호
• /
• pp.283-293
• /
• 2019

The limited availability of raw materials and increasing service demands for pavements pose a unique challenge in terms of pavement design and concrete material selection. The self-compacting rubberized concrete (SCRC) can be used in pavement design. The SCRC pavement slab has advantages of excellent toughness, anti-fatigue and convenient construction. On the premise of satisfying the strength, the SCRC can increase the ductility of pavement slab. The aim of this investigation is proposing a new method to predict the crack growth and flexural capacity of large-scale SCRC slabs. The mechanical properties of SCRC are obtained from experiments on small-scale SCRC specimens. With the increasing of the specimen depth, the bearing capacity of SCRC beams decreases at the same initial crack-depth ratio. By constructing extended finite element method (XFEM) models, crack growth and flexural capacity of large-scale SCRC slabs with different fracture types and force conditions can be predicted. Considering the diversity of fracture types and force conditions of the concrete pavement slab, the corresponding test was used to verify the reliability of the prediction model. The crack growth and flexural capacity of SCRC slabs can be obtained from XFEM models. It is convenient to conduct the experiment and can save cost.

• Structural Engineering and Mechanics
• /
• 제59권1호
• /
• pp.133-151
• /
• 2016

Self-Compacting Concrete (SCC) has been originally developed in Japan to offset a growing shortage of skilled labors, is a highly workable concrete, which is not needed to any vibration or impact during casting. The utilizing of fibers in SCC improves the mechanical properties and durability of hardened concrete such as impact strength, flexural strength, and vulnerability to cracking. The purpose of this investigation is to determine the effect of steel fibers on mechanical performance of traditionally reinforced Self-Competing Concrete beams. In this study, two mixes Mix 1% and Mix 2% containing 1% and 2% volume friction of superplasticizer are considered. For each type of mixture, four different volume percentages of 60/30 (length/diameter) fibers of 0.0%, 1.0%, 1.5% and 2% were used. The mechanical properties were determined through compressive and flexural tests. According to the experimental test results, an increase in the steel fibers volume fraction in Mix 1% and Mix 2% improves compressive strength slightly but decreases the workability and other rheological properties of SCC. On the other hand, results revealed that flexural strength, energy absorption capacity and toughness are increased by increasing the steel fiber volume fraction. The results clearly show that the use of fibers improves the post-cracking behavior. The average spacing of between cracks decrease by increasing the fiber volume fraction. Furthermore, fibers increase the tensile strength by bridging actions through the cracks. Therefore, steel fibers increase the ductility and energy absorption capacity of RC elements subjected to flexure.

• 콘크리트학회논문집
• /
• 제15권5호
• /
• pp.643-649
• /
• 2003

본 연구의 목적은 부착실험 및 휨실험을 실시하여 구조용 합성섬유의 단면적 및 표면형상의 변화에 따른 부착성능과 휨성능을 평가하는 것이다. 6가지 다른 형상의 구조용 합성섬유를 조사하였고 부착 및 휨실험을 수행하였다. 6가지 형상의 구조용 합성섬유를 조사하였고 휨시험과 부착시험을 실시하였다. 실험변수는 3가지 종류의 형상과 2가지 종류의 단면적 변화로 하였다. 실험결과 구조용 합성섬유의 단면적이 동일할 때 주기 및 높이가 증가할수록 부착하중 및 인발 파괴 에너지는 감소하고 휨강도는 증가하였다. 또한 주기 및 높이가 일정할 섬유의 단면적이 증가할수록 인발하중과 인발 파괴 에너지는 증가하였고 휨강도는 감소하였다. 실험결과를 기본으로하여 콘크리트의 구조성능은 섬유의 부착성능 뿐만 아니라 콘크리트에 혼입되어 있는 섬유의 수, 인장하중에 저항할 수 있는 섬유의 재료특성 등에 복합적으로 영향을 받는 다는 것을 알 수 있었다.

• 구강회복응용과학지
• /
• 제17권3호
• /
• pp.199-204
• /
• 2001

This study was to investigate the reused possibility of zirconia reinforced glass-ceramic(IPS Empress Cosmo ceramic) with sprue button in the flexure strength and fracture toughness. 40 disk-shaped ceramic specimens (20 specimens: as-pressed material; 20 specimens: reused material) with approximately 1.7 mm thickness and 15 mm diameter were prepared by "lost wax" technique. The remnants(sprue buttons) were used for repressing. The surface treatments for the discs were gradually abraded with 320, 800, 1200, and 2000 grit SiC sandpaper. The specimens were evaluated their flexure strength with the biaxial flexure jig(ball-on-three balls) and their fracture toughness with Vickers Indentation-microfracture test. The Weibull moduli were calculated for biaxial flexural strength. The mean flexure strength and fracture toughness of each group were $122.2{\pm}18.3MPa$, $1.00{\pm}0.09MPa{\cdot}m^{0.5}$ (as-pressed ceramics), and $122.2{\pm}20.3MPa$, $1.01{\pm}0.10MPa{\cdot}m^{0.5}$ (reused ceramics). There were no significant differences in the strength and the fracture toughness between the as-pressed and the reused IPS Empress Cosmo ceramic (P>0.05). This implied zirconia reinforced glass-ceramic(IPS Empress Cosmo ceramic) could be used one more time by reusing of sprue button in the flexure strength and fracture toughness.