• 폴리머
• /
• 제30권2호
• /
• pp.97-107
• /
• 2006

방향족 강직사슬 폴리이미드는 높은 주사슬 간의 인력으로 인해 유기용제에 용해되지 않고 상전이온도가 분해 온도보다 높아 응용분야에 많은 제한이 되고 있다. 방향족 폴리이미드의 가공성을 향상시키기 위해서 긴 곁사슬을 도입하면 가공성 향상뿐만 아니라 곁사슬과 주사슬 사이에 독특한 구조를 가지게 됨으로써 새로운 응용분야를 개척할 수가 있다. 본 논문에서는 여러 가지 형태의 곁사슬을 가지는 방향족 폴리이미드의 합성과 화학구조에 따른 물성변화에 대해 논의하고 또한 폴리이미드의 액정배향막, 감광재료, 교대 다층박막, 발광재료 등으로의 응용특성에 관해서도 조감한다.

• Elastomers and Composites
• /
• 제44권4호
• /
• pp.436-441
• /
• 2009

주사슬에 방향족 고리와 펜타메틸렌 그룹을 포함하고 있는 반유연성 폴리에스터가 direct polycondensation 에 의하여 합성되었다. 합성된 중합체의 구조는 $^1H$-NMR과 FT-IR에 의해, 상전이거동에 대해서는 DSC, TGA 및 직교된 편광현미경에 의하여 관찰되었다. 합성된 중합체의 고유점성도 ($\eta_{inh}$)는 0.46에서 1.30 dL/g 사이의 값으로 측정되었고, 분자사슬 중 강직사슬그룹의 선형성이 클수록 용융전이온도 ($T_m$)는 높았으며, 용해도 조사에 사용된 유기용매에 대한 용해도는 감소되었다. 그리고, 중합체들 중 P-H, P-mH, P-4H는 넓은 비등방성 영역에서 열방성 네마틱 액정상을 나타내었으나 P-R, P-C, P-2B는 액정상을 나타내지 않았다.

• 마이크로전자및패키징학회지
• /
• 제21권2호
• /
• pp.1-11
• /
• 2014

Flexible transparent conductive electrodes (TCEs) have recently attracted a great deal of attention owing to rapid advances in flexible electronic devices, such as flexible displays, flexible photovoltanics, and e-papers. As the performance and reliability of flexible electronics are critically affected by the quality of TCE films, it is imperative to develop TCE films with low resistivity and high transparency as well as high flexibility. Indium tin oxide (ITO) has been the most dominant transparent conducting material due to its high optical transparency and electrical conductivity. However, ITO is susceptible to cracking and delamination when it is bent or deformed. Therefore, various types of flexible TCEs, such as carbon nanotube, conducting polymers, graphene, metal mesh, Ag nanowires (NWs), and metal mesh have been extensively investigated. Among several options to replace ITO film, Ag NWs and metal mesh have been suggested as the promising candidate for flexible TCEs. In this paper, we focused on Ag NWs and metal mesh, and summarized the current development status of Ag NWs and metal mesh. The several critical issues such as high contact resistance and haze are discussed, and newly developed technologies to resolve these issues are also presented. In particular, the flexibility and durability of Ag NWs and metal mesh was compared with ITO electrode.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3060-3065
• /
• 2009

알콕시 곁사슬을 갖는 유연한 곁사슬을 갖는 전방향족 Poly(ether-ether-ester)가 ether기로 연결된 triad diol과 2,5-dialkoxyterephthalic acid로부터 direct polycondensation에 의하여 합성되었다. 중합체의 구조와 물리적 성질은 1H-NMR, FT-IR, DSC, TGA를 이용하여 조사되었다. 연구결과에 의하면, 용매로서 1,1,2,2-tetrachloroethane(TCE)를 사용하여 측정된 고분자의 고유점성도는 0.45~0.86 이/g의 값을 나타내었으며, 질소 분위기하에서 측정된 초기열분해온도는 378~418 $^{\circ}C$를 나타내었다. 중합체 대부분은 측정에 사용된 유기용매에 용해되었고, 용융전이온도(Tm)는 곁사슬의 길이가 길수록 감소되었으며 홀수-짝수 효과를 나타내었다.

• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.81-88
• /
• 2020

In this paper, the performances of the electrical characteristics of the Fused Deposition Modeling (FDM) 3D-printed flexible resistance sensor was evaluated. The FDM 3D printing flexible resistive sensor is composed of flexible-material thermoplastic polyurethane and a conductive PLA (carbon black conductive polylactic acid) polymer. While 3D printing, polymer filaments heat up quickly before being extruded and cooled down quickly. Polymers have poor thermal conductivity so the heating and cooling causes unevenness, which then results in internal stress on the printed parts due to the rapidity of the heating and cooling. Electrical resistance measurements show that the 3D-printed flexible sensor is unstable due to internal stress, so the 3D-printed flexible sensor resistance curve does not match the increases and decreases in the displacement curve. Therefore, annealing was performed to eliminate the mismatch between electrical resistance and displacement. Annealing eliminates residual stress on the sensor, so the electrical resistance of the sensor increases and decreases in proportion to displacement. Additionally, the resistance is lowered in comparison to before annealing. The results of this study will be very useful for the fabrication of various devices that employ 3D-printed flexible sensor that have multiple degrees of freedom and are not limited by size and shape.

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1367-1372
• /
• 2010

유연한 곁사슬을 가지고 있는 copoly(ether-ether-ester)가 중축합반응에 의하여 합성되었다. 테트라클로로에탄 중에서 측정된 중합체의 고유점성도 값은 0.42~0.78 dl/g을 나타내었다. 합성된 고분자의 구조는 $^1H$-NMR과 FT-IR에 의하여 조사되었으며, 열적성질과 액정성은 DSC, TGA, POM, XRD에 의하여 측정되었다. 조사된 결과에 의하면 합성된 공중합체들은 모두 단독중합체보다 낮은 용융전이온도를 나타내었으며, 공중합체 내의 비페닐렌 단위의 함량이 60 mol %이상일 때 네마틱액정상이 관찰되었으며, 합성된 중합체의 액정성은 비페닐렌 함량에 의존하였다.

• Macromolecular Research
• /
• 제10권5호
• /
• pp.266-272
• /
• 2002

Although the reptational model of Doi and Edwards gives a successful description of viscoelasticity of flexible linear polymers, the success is restricted to the terminal region./sup 1/ There have been several attempts to modify the Doi-Edwards model to describe wider range of time or frequency./sup 2-6/ This paper suggests a simple phenomenological model which can describe wider range of molecular weight than such molecular models can. Although our model is a phenomenological one, it is practical and convenient to predict the effect of molecular weight distribution on linear viscoelastic data because of its simple mathematical form.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.109-109
• /
• 2006

Flexible polymers with densely grafted side chains adopt the shape of cylindrical brushes, because the steric repulsion of the side chains overcomes the entropic restoring force of the main chain. Combined light-and neutron scattering measurements elucidate the extend of main chain and side chain stretching as function of side chain length. The application of cylindrical brushes as molecular actuators in response to external stimuli which is discussed.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.242-243
• /
• 2006

In this work, we report the synthesis and characterization of azomethineester polymers that consist of banana-shaped mesogen in their backbone. Two parts of the key structure of five-ring bent-core mesogen were modified by connecting different angle of central unit (Ar), and introducing lateral substituent into the outer ring (X). The synthetic details includes (1) placing the dioxydodecamethylene unit as a flexible spacer, (2) possessing 2,3- or 2,7-naphthylene, or 1,2-phenylene connection on the central unit, and (3) introducing fluorine or chlorine substituent (X = F or Cl) into the outer phenylene unit.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.171-174
• /
• 2006

In this work, we report the synthesis and characterization of azomethine-ester polymers that consist of banana-shaped mesogen in their backbone. Two parts of the key structure of five-ring bent-core mesogen were modified by connecting different angle of central unit (Ar), and introducing lateral substituent into the outer ring (X). The synthetic details includes (1) placing the dioxydodecamethylene unit as a flexible spacer, (2) possessing 2,3- or 2,7-naphthylene, or 1,2-phenylene connection on the central unit, and (3) introducing fluorine or chlorine substituent (X = F or Cl) into the outer phenylene unit.