• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.97-107
• /
• 2006

In spite of excellent thermomechanical performance the majority of aromatic polyimides are so poor in processability due to their high backbone rigidity that their applications are greatly limited. The introduction of long side chains not only enhances their processiblity but also makes useful contribution to discovering new application fields. In this article, a variety of novel aromatic polyimides with flexible side chains were prepared either from new dimines or new dianhydrides to measure the influence of the side chains on structure and properties of the polymers and their new applications as liquid crystal alignment layers, photosensitive polymers, alternating multilayer nano-films and photoluminescent materials are discussed.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.436-441
• /
• 2009

Semi flexible polyesters containing aromatic rings and pentamethylene groups in the main chain were synthesized by direct polycondensation reaction. The structures of these polymers were investigated by $^1H$-NMR and FT-IR and the phase transition behavior was characterized with DSC, TGA and crossed polarizing microscope. Inherent viscosities ($\eta_{inh}$) of polymers measured in phenol/p-chlorophenol/1,1,2,2-tetrachloroethane were between 0.46 and 1.30 dL/g. As increasing the linearlity of rigid moieties in polyster, melting transition temperatures ($T_m$) increased and solubilities in organic solvents decreased. P-H, P-mH and P-4H of the polymers formed turbid melts that showed stir-opalescence and nematic phase at the broad anisotropic region, However, P-R, P-C and P-2B did not exhibit any textures related to the liquid crystallinity.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.2
• /
• pp.1-11
• /
• 2014

Flexible transparent conductive electrodes (TCEs) have recently attracted a great deal of attention owing to rapid advances in flexible electronic devices, such as flexible displays, flexible photovoltanics, and e-papers. As the performance and reliability of flexible electronics are critically affected by the quality of TCE films, it is imperative to develop TCE films with low resistivity and high transparency as well as high flexibility. Indium tin oxide (ITO) has been the most dominant transparent conducting material due to its high optical transparency and electrical conductivity. However, ITO is susceptible to cracking and delamination when it is bent or deformed. Therefore, various types of flexible TCEs, such as carbon nanotube, conducting polymers, graphene, metal mesh, Ag nanowires (NWs), and metal mesh have been extensively investigated. Among several options to replace ITO film, Ag NWs and metal mesh have been suggested as the promising candidate for flexible TCEs. In this paper, we focused on Ag NWs and metal mesh, and summarized the current development status of Ag NWs and metal mesh. The several critical issues such as high contact resistance and haze are discussed, and newly developed technologies to resolve these issues are also presented. In particular, the flexibility and durability of Ag NWs and metal mesh was compared with ITO electrode.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3060-3065
• /
• 2009

A series of wholly aromatic Poly(ether-ether-ester)s with flexible side chain was synthesized by direct polycondensation from ether linkaged triad diol and 2,5-dialkoxyterephthalic acid. The chemical structures and physical properties of these polymers were investigated by using $^1H$-NMR, FT-IR, DSC and TGA. As results of investigations, the inherent viscosities($\eta$inh) measured at $40^{\circ}C$ in 1,1,2,2-tetrachloroethane(TCE) were 0.45~0.86 dl/g and initial decomposition(Td) in TGA occurred at 378~418 $^{\circ}C$ in N2 gas. The majority of these polymers were soluble in organic solvents used in this experiments at elevated temperatures. Melting temperatures(Tm) decreased with increasing the length of the side chain and showed odd-even effects.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.1
• /
• pp.81-88
• /
• 2020

In this paper, the performances of the electrical characteristics of the Fused Deposition Modeling (FDM) 3D-printed flexible resistance sensor was evaluated. The FDM 3D printing flexible resistive sensor is composed of flexible-material thermoplastic polyurethane and a conductive PLA (carbon black conductive polylactic acid) polymer. While 3D printing, polymer filaments heat up quickly before being extruded and cooled down quickly. Polymers have poor thermal conductivity so the heating and cooling causes unevenness, which then results in internal stress on the printed parts due to the rapidity of the heating and cooling. Electrical resistance measurements show that the 3D-printed flexible sensor is unstable due to internal stress, so the 3D-printed flexible sensor resistance curve does not match the increases and decreases in the displacement curve. Therefore, annealing was performed to eliminate the mismatch between electrical resistance and displacement. Annealing eliminates residual stress on the sensor, so the electrical resistance of the sensor increases and decreases in proportion to displacement. Additionally, the resistance is lowered in comparison to before annealing. The results of this study will be very useful for the fabrication of various devices that employ 3D-printed flexible sensor that have multiple degrees of freedom and are not limited by size and shape.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1367-1372
• /
• 2010

Copoly(ether-ether-ester)s having flexible side chain were synthesized by polycondensation. Intrinsic viscosities of polymers were between 0.42 and 0.78dl/g in tetrachloroethane. The polymer structures were investigated by $^1H$-NMR and FT-IR, and thermal and liquid crystalline properties of polymers were measured by DSC, TGA, POM and XRD. As results of investigations, synthetic copolymers exhibited lower melting temperature than homopolymers. When the biphenylene units contents in copolymer were more than 60 mol %, nematic mesophase was observed, and the mesophase of synthetic polymers was dependent upon biphenylene content.

• Macromolecular Research
• /
• v.10 no.5
• /
• pp.266-272
• /
• 2002

Although the reptational model of Doi and Edwards gives a successful description of viscoelasticity of flexible linear polymers, the success is restricted to the terminal region./sup 1/ There have been several attempts to modify the Doi-Edwards model to describe wider range of time or frequency./sup 2-6/ This paper suggests a simple phenomenological model which can describe wider range of molecular weight than such molecular models can. Although our model is a phenomenological one, it is practical and convenient to predict the effect of molecular weight distribution on linear viscoelastic data because of its simple mathematical form.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.109-109
• /
• 2006

Flexible polymers with densely grafted side chains adopt the shape of cylindrical brushes, because the steric repulsion of the side chains overcomes the entropic restoring force of the main chain. Combined light-and neutron scattering measurements elucidate the extend of main chain and side chain stretching as function of side chain length. The application of cylindrical brushes as molecular actuators in response to external stimuli which is discussed.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.242-243
• /
• 2006

In this work, we report the synthesis and characterization of azomethineester polymers that consist of banana-shaped mesogen in their backbone. Two parts of the key structure of five-ring bent-core mesogen were modified by connecting different angle of central unit (Ar), and introducing lateral substituent into the outer ring (X). The synthetic details includes (1) placing the dioxydodecamethylene unit as a flexible spacer, (2) possessing 2,3- or 2,7-naphthylene, or 1,2-phenylene connection on the central unit, and (3) introducing fluorine or chlorine substituent (X = F or Cl) into the outer phenylene unit.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.171-174
• /
• 2006

In this work, we report the synthesis and characterization of azomethine-ester polymers that consist of banana-shaped mesogen in their backbone. Two parts of the key structure of five-ring bent-core mesogen were modified by connecting different angle of central unit (Ar), and introducing lateral substituent into the outer ring (X). The synthetic details includes (1) placing the dioxydodecamethylene unit as a flexible spacer, (2) possessing 2,3- or 2,7-naphthylene, or 1,2-phenylene connection on the central unit, and (3) introducing fluorine or chlorine substituent (X = F or Cl) into the outer phenylene unit.