• International Journal of Aeronautical and Space Sciences
• /
• 제2권1호
• /
• pp.78-92
• /
• 2001

In this paper, several dynamic systems are modeled using the time domain finite element method. Galerkins' Weak Principle is used to model the general second-order mechanical system, and is applied to a simple pendulum dynamics. Problems caused by approximating the final momentum are also investigated. Extending the research, some dynamic analysis methods are suggested for the hybrid coordinate systems that have both slew and flexible modes. The proposed methods are based on both Extended Hamilton's Principle and Galerkin's Weak Principle. The matrix wave equation is propagated in space domain, satisfying the geometric/natural boundary conditions. As a result, the flexible motion can be obtained compatible with the applied control input. Numerical example is shown to demonstrate the effectiveness of the proposed modeling methods for the hybrid coordinate systems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.425-426
• /
• 2006

This study proposes a new simulation method of high speed rotor system with the dynamic model using multi body dynamic analysis tool and with a new phase modulating technique as a system control algorithm. A dynamic model of high speed rotor system was built by, ADAMS, commercial multi body dynamic program. The phase modulating technique is a new control algorithm for a rotor system. This algorithm can control system using an adaptive proportional gain and an adaptive phase which are obtained from periodical input signal. To make control system, a ADAMS model and component parameters and phase controller was composed by Matlab Simulink And simulate it.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.365-370
• /
• 2003

The problem of brake judder is typically caused by quality defects in manufacturing. This quality problem, however, can't be controlled deterministically and requires analyses and designs considering uncertainties. This paper presents a method for dynamic analysis of a brake judder considering uncertainties. Firstly, quality defects, which come from the uncertainties, are determined by examination of symptoms of the brake judder quality problem. Effective quality defects are selected by investigation of process capability and comparison of sensitivity of each quality defects and noise levels of the effective quality defects are determined. Secondly, flexible multibody dynamic analysis and finite element analysis according to the proposed method are carried out. Finally, The analysis results are compared with the test results with noise levels of the effective quality defects.

• 한국지반공학회지:지반
• /
• 제3권3호
• /
• pp.31-48
• /
• 1987

지중에 매설된 관에는 관위의 흙무게나 지표면상재하중으로 인하여 연직견력이 작용하며, 지진이나 불등침하등으로 인하여 상향하중이 작용하는 경우도 있다. 본 연구에서는 Marston-Spangler이론을 새로운 방법으로 분석하여 관위의 흙무게로 인해 매설권에 작용하는 압력에 관하여 검토하였고, 매설연성관에 대한 재하실험을 실시하여 지표면상재하중으 로 인한 매설관의 거동특성을 연구하였다. 또 매설관의 인발저항(uplifting resistance)이론의 검토와 상향인발실험을 통하여 최대인발저항을 구하는 방법 등을 연구하였다.

• 대한기계학회논문집
• /
• 제16권6호
• /
• pp.1089-1098
• /
• 1992

본 연구에서는 이산제어 관점에서 비병치제어를 고려한다. 연소시간계에서 많은 장점을 가진 병치제어는 이산시간계로 변환되면 샘플링과 홀딩에서 야기되는 시 간지연 요소때문에 그 특성이 달라진다.따라서 본 논문에서는 연속시간계에서 제안 된 시간지연을 갖는 비병치제어를 이산시간계로 확장하고 제어기 설계 방법을 제시코 저 한다.

• 한국자동차공학회논문집
• /
• 제14권3호
• /
• pp.51-57
• /
• 2006

The contact pressure distribution between a rubber wiper blade and a glass windshield is a major factor for wiping performance. A modeling and simulation method has been developed to forecast the contact pressure distribution on a wiper blade. For modeling multi-body dynamics of an wiper linkage system and flexible nature of wiper blade, ADAMS and ADAMS/flex are employed. A simulation study has been also conducted to obtain contact pressure distribution. Comparison between simulation and measurement is provided to ensure fidelity of the model and the simulation method.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.12.1-12.1
• /
• 2009

For the micro conductive line, memory device fabrication process use many expensive processes such as manufactur-ing of photo mask, coating of photo resist, exposure, development, and etching. However, direct printing technology has the merits about simple and cost effective processes because nano-metal particles contained inks are directly injective without mask. And also, this technology has the advantage about fabrication of fine pattern line on various substrates such as FPCB, PCB, glass, polymer and so on. In this work, we have fabricated the fine and thick metal pattern line on flexible PCB substrate for the next generation electronic circuit using Ag nano-particles contained ink. To improve the line tolerance on flexible PCB, metal lines are fabricated by sequential prinitng method. Sequential printing method has vari-ous merits about fine, thick and high resolution pattern lines without bulge.

• 한국컴퓨터정보학회논문지
• /
• 제4권3호
• /
• pp.13-19
• /
• 1999

본 연구는 TPN (Time Petri Nets) unfolding을 이용하여 가공 machine과 세정 machine으로 구성된 FMC (Flexible Manufacturing Cell)의 WIP (Work In Process)를 분석하는 방법을 제시한다. 여기서, PN의 unfolding은 상태공간폭발이 발생하지 않는 concurrent system의 검증에 사용되는 순서기반 방법이다. 본 연구는 일반적으로 발생하는 순환상태 스케쥴 문제에서 가장 그 작업과정 시간을 최적화하기 위하여 원래의 net을 동일한 비순환 net으로 바꾸어 줄 수 있는 unfolding 개념을 기반으로 한 것이다.

• 대한산업공학회지
• /
• 제15권1호
• /
• pp.65-75
• /
• 1989

This study complements the previous studies on workload distribution problems in Flexible Manufacturing Systems. Specifically, we consider the problem in two perspectives, the long-range policy and the short and medium-term planning and control. The long-term loading policy focusses on identifying the optimal loading of the system characterized by either balanced loading or unique unbalanced loading for which a steepest ascent method is developed. These results are then applied to study the optimal medium and short-term planning and control problems, for which a truncated dynamic programming method is developed in order to obtain the optimal allocation of the given operation mix of part types to work stations.

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.52-60
• /
• 2000

In order to design a reliable machine component efficiently, it is necessary to set up the process of durability analysis using computer simulation technique. In this paper, two methods for dynamic stress calculation, which are basis of durability analysis, are reviewed. Then, a user-oriented dynamic stress analysis program is developed from these two algorithms together with a general-purpose flexible body dynamic analysis and structural analysis programs. Finally, a slider-crank mechanism which has a flexible connecting-rod is chosen to show the special characteristics of these two dynamic stress calculation methods.