• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.429-429
• /
• 2013

We present a systematic study of the electrical, optical and electromechanical properties of flexible graphene/metal grid hybrid transparent conductive electrodes using 4-point prove method, ultraviolet/visible spectrometer and inner/outer bending test system. The hybrid electrodes were synthesized by depositing a silver grid on a graphene surface. The sheet resistance of hybrid electrodes was as low as 30 Ω/square, while the transmittance was 90%. The electromechanical properties as a function of the change of bending radius were evaluated by measuring the change in resistance. The result will be presented in detail. We believe that these results will provide useful information for the flexible optoelectronic devices based on graphene transparent electrodes.

• 한국시뮬레이션학회논문지
• /
• 제12권2호
• /
• pp.13-24
• /
• 2003

In this study, we propose a scheduling analysis method of the Flexible management system using the transitive matrix. The Scheduling problem is a combination-optimization problem basically, and a complexity is increased exponentially for a size of the problem. To reduce an increase of a complexity, we define that the basic unit of concurrency (short BUC) is a set of control flows based on behavioral properties in the net. And we propose an algorithm to divide original system into some BUC. To sum up, we divide a petri net model of the Flexible management system Into the basic unit of concurrency through the division algorithm using the transitive matrix. Then we apply it to the division-scheduling algorithm to find an efficient scheduling. Finally, we verify its efficiency with an example.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.357-362
• /
• 2004

Maglev vehicles, which are levitated and propelled by electromagnets, often run on elevated guideways comprised of steel, aluminum and concrete. Therefore, an analysis .of the dynamic interaction between the Maglev vehicle and the guideway is needed in the design of the critical speed, ride, controller design and weight reduction of the guideway. This study proposes a dynamic interaction simulation technique using a flexible beam model based on multi-body dynamics. The vehicle and the elevated guideway are represented as a multi-body dynamics model and a two-dimensional flexible beam, respectively. The proposed model was applied to an urban transit Maglev vehicle, UTM01, which is undergoing test drive. As a result of the proposed method, we concluded that it is possible to analyze the dynamic interaction between the Maglev vehicle and the guideway.

• 대한산업공학회지
• /
• 제13권2호
• /
• pp.117-128
• /
• 1987

A major problem in the adoption of advanced manufacturing systems such as F.M.S. (Flexible Manufacturing Systems) is the prerequisite economic justification process because of high investment needed for the acquisition and installation of F.M.S. While some of the benefits expected are readily quantifiable, others are very difficult or even impossible, using conventional method. Thus the investment in F.M.S. should be considered as a strategic decision rather than a tactical decision which concerns with only financial implications. In this paper we review papers on major justification techniques developed during thelast decade and identify the benefits of F.M.S. and describe the considerations in the justification of F.M.S. Also, we deal with the current and future research directions in justifying F.M.S.

• Journal of Power Electronics
• /
• 제6권1호
• /
• pp.8-17
• /
• 2006

In this paper, we propose a fault-tolerant control system for the position control and vibration suppression of a flexible arm robot. The proposed control system has a strain gauge sensor signal observer based on a reaction force observer and detects a fault by monitoring an estimated error. In order to improve the estimation accuracy, the plant parameters included in the sensor signal observer are updated by using the strain gauge sensor signal in normal time through the adaptive law. After fault detection, the proposed control system exchanges the faulty sensor signal for the estimated one and switches to a fault mode controller so as to maintain the stability and the control performance. We confirmed the effectiveness of the proposed control system through several experiments.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.671-674
• /
• 2007

We report on the fabrication and characterization of an OLED with an anode completed using screenprintable conducting polymer containing PEDOT: PSS. The demonstration of this organic transparent anode for OLEDs shows a good possibility for flexible displays using this polymeric electrode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1059-1062
• /
• 1998

This paper which can simulate FRIENDS(Flexible Reliable Intelligent Electrical eNergy Delivery System) model of distribution electrical system presents a new algorithm. In the operation of FRIENDS model, dispersed energy storage(DES) systems have an important role. We can use the active and reactive power of DES to control customer's voltage. In this, the former means load levelling operation and the later means voltage control operation of DES. We focus our research on load levelling operation of DES. We develope an algorithm to get an optimal capacity and operation schedule of DES and then apply it to the FRIENDS model. The results show the effectiveness of the proposed method.

• 전자공학회논문지B
• /
• 제29B권3호
• /
• pp.25-34
• /
• 1992

This paper proposes a Self-Tuning control algorithm for tracking the reference trajectory by measuring the end-point of robot manipulator whose links are light and flexible, and the performance of it is tested through the computer simulation. As an object of system, a flexible robot manipulator with two-links is considered and an assumed mode shape method including gravity force is adopted to analyze the vibration modes for each links and dynamics equation is derived. The controller is designed as a combined form which consists of dynamic feedforward compensator and self-tuning feedback controller. The one supplies nominal torque and the other supplies variational torque to manipulator. Apart from the, K-incremental predictor is also proposed in order to eliminate the offset error. and it shows that the result of simulation adapted well to load change and rapid velocity.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.115-121
• /
• 2000

입력제어신호 변형은 유연한 빔의 진동을 감소시키는 중요한 수단이다. 본 논문에서는 유한시간에서 다중 모드인 유연한 빔의 오차 진동을 제거하는 매우 단순한 입력제어신호 변형 방법을 소개한다. 제어신호는 선형 방정식의 풀이에 의해 구성되어 진다. 유한시간 동안 원하는 동작의 모터 각도는 임의의 한정된 오차 진동을 제거함으로서 도달된다. 폐루프 구성에서 모터 각도에 대한 기준입력으로서의 제어신호 사용에 대한 필요한 조건들 또한 다루게 된다. 제안된 시스템 구성의 효과는 컴퓨터 시뮬레이션을 통해 증명된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.444-445
• /
• 2006

We prepared ZnO:Al thin films under various sputtering conditions by using facing targets sputtering (FTS) method. ZnO:Al thin films were deposited on polyethersulfon (PES) substrate which is the thickness of 200um at room temperature. the electrical, optical and crystallographic properties of ZnO:Al were investigated. From the results, prepared alll ZnO:Al thin films showed (002) diffraction peaks. ZnO:Al thin film with a resistivity of $8.4{\times}10^{-4}{\Omega}cm$ and a transmittance of over 80% in visible range was obtained.