• 한국항공운항학회지
• /
• 제14권4호
• /
• pp.31-37
• /
• 2006

In this paper, an experimental study on the robust input shaping for control of the residual vibration of flexible structures has been investigated. Two approaches has been used for the robustness of input shaping: the first method is to increase the number of impulses, and the other includes an EI shaper using vector diagram. The input case designed by the application of the above methods has been applied to a control problem involving residual vibration of a rotating hub with two flexible appendages. It has been found by a series of experiments that the input shaper designed in this paper works well for the residual vibration control of the flexible structure.

• Structural Engineering and Mechanics
• /
• 제43권2호
• /
• pp.163-177
• /
• 2012

This paper presents a LMI(linear matrix inequality)-based fuzzy approach of modeling and active vibration control of geometrically nonlinear flexible plates with piezoelectric materials as actuators and sensors. The large-amplitude vibration characteristics and dynamic partial differential equation of a piezoelectric flexible rectangular thin plate structure are obtained by using generalized Fourier series and numerical integral. Takagi-Sugeno (T-S) fuzzy model is employed to approximate the nonlinear structural system, which combines the fuzzy inference rule with the local linear state space model. A robust fuzzy dynamic output feedback control law based on the T-S fuzzy model is designed by the parallel distributed compensation (PDC) technique, and stability analysis and disturbance rejection problems are guaranteed by LMI method. The simulation result shows that the fuzzy dynamic output feedback controller based on a two-rule T-S fuzzy model performs well, and the vibration of plate structure with geometrical nonlinearity is suppressed, which is less complex in computation and can be practically implemented.

• 동력기계공학회지
• /
• 제4권4호
• /
• pp.92-98
• /
• 2000

Modern manufacturing systems should cope with the frequent changes in a product model and disturbances in manufacturing process. The control system of such systems must cover a constant adaptation and high flexibility. Holonic Flexible Manufacturing Cell(HFMC) is introduced to handle these issues more successfully. It is based on the concept of autonomous co-operating agent, called 'Holon', which is a building block of a manufacturing system for transforming, transporting, storing and/or validating information and physical objects. In this paper the basic structure of the HFMC is represented by using Unified Modeling Language and Open architecture cell controller is developed for effective integration components of a manufacturing system. Also a new control model, called MuLOM(Multi-Layered Operation Model), is suggested to represent the control behaviour for a holonic flexible manufacturing cell control system.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1112-1118
• /
• 1990

본 연구에서는 선단의 각속도를 측정하여 궤환함으로써 유연한 로봇팔의 진동 을 억제함과 동시에 선단의 위치를 제어하고자 한다. 선단에 레이트 자이로를 설치 하여 선단의 각속도를 측정하였다. 레이트 자이로는 이미 비행체의 제어에 널리 사 용되고 있는 정밀 각속도 센서로 소형이면서 가벼워 회전 진동측정이 매우 쉽고 편리 한 장점이 있다. 또한 유연한 로봇팔을 선단에 집중질량이 있는 오일러보로 가정하 여 모델링을 하였으며, 실험에서는 1차진동 모드까지만 고려하였다.

• International Journal of Control, Automation, and Systems
• /
• 제4권3호
• /
• pp.308-317
• /
• 2006

To control the tip position of a flexible-link manipulator, a neural network (NN) controller is proposed in this paper. The dynamics error used to construct NN controller is derived based on output redefinition approach. Without the filtered tracking error, the proposed NN controller can still guarantee the closed-loop system uniformly asymptotically stable as well as NN weights bounded. Furthermore, the tracking error of desired trajectory can converge to zero with the proposed controller. For comparison an NN controller with filtered tracking error is also designed for the flexible-link manipulator. Finally, simulation studies are carried out to verify the theoretic results.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권2호
• /
• pp.227-235
• /
• 1999

In this paper a vibration control fo a one-link flexible beam is considered. At first a state-space model for a flexible beam is derived by using the assumed-modes approach. Based on this model the transfer function between the applied torque and the tip deflection fo the beam is presented because it is convenient to apply our method. In general there exist some control difference due to flexibility of the beam so we adop a forward-passive controller to reduce these phenomena. And a complex dual-input describing function compensator is used to control the tip deflection. The stabiltiy and the performance of the closed-loop system are analyzed. Finally the validity of the derived model and the effectiveness of proposed controller are confirmed throuth simula-tions and experiments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.243-247
• /
• 1996

This paper presents a vibration control of a flexible structure using a controllable ER fluid damper. A clamped-clamped flexible structure system supported by two short columns mimicking a small-sized bridge system is considered. An ER fluid damper which is operated in shear mode is designed and attached to the middle of the flexible structure. The governing equation of motion and associated boundary conditions are derived from Hamilton's principle. A sliding mode control is formulated in order to actively suppress the vibration of the structure due to external excitations. Experimental control results are presented in the frequency domain.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.927-932
• /
• 2007

This paper proposes a robust back-stepping control with polynomial-type PD input for flexible joint robot manipulators to overcome parameter uncertainty. In the first step, a fictitious control is designed with polynomial-type PD input for the rigid link dynamic by the H-infinity control method. In second and third steps, the other fictitious control and real control are designed using saturation control and polynomial-type PD input based on the Lyapunov's second method. In each step, the designed robust inputs satisfy the L2-gain, which is equal to or less than gamma in the closed loop system. In contrast with the previous researches, the proposed method proves performance relations with PD gain from the robust gain. The performance robustness of the proposed control is verified through a 2-DOF robot manipulator with joint flexibility.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.242-248
• /
• 1987

Recently, a quite large number of investigation is published on the subject of Flexible Manufacturing System which can cope with the volatile market demand and the variety of product. Minimum requirement of designing FMS is depicted and by investigating the communication system between the machine tool and the cell control computer, ana between the central computer and the cell control computer, when it is formed as a sub-system of an FEM, the software can be evolved to the control software of the total Flexible Manufacturing System. It is developed the communication system between the central computer and the cell control computer which is the basic structure of the control architecture of FMS under the concept of DNC (Direct Numerical Control). It is used CYBER 180-830 as the central computer, and GMC-1100 computer as the cell control computer, and the main basic program is developed and tested, thus forming a DNC system which can be used in educational environment.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1689-1696
• /
• 2000

This paper proposes a new adaptive control scheme for flexible-link robots. A model-based nonlinear control scheme is designed based on a V-shape Lyapunov function, and then the nonlinear control i s extended to a model-based adaptive control to cope with parametric uncertainties in the dynamic model. The proposed control guarantees the global exponential or global asymptotic stability of the overall control system with all internal signals bounded. The effectiveness of the proposed control is shown by computer simulation.