• Journal of the Korea Computer Graphics Society
• /
• v.12 no.4
• /
• pp.23-32
• /
• 2006

In recent years, since the digital camera has been popularized, so users can easily collect hundreds of photos in a single usage. Thus the managing of hundreds of digital photos is not a simple job comparing to the keeping paper photos. We know that managing and classifying a number of digital photo files are burdensome and annoying sometimes. So people hope to use an automated system for managing digital photos especially for their own purposes. The previous studies, e.g. content-based image retrieval, were focused on the clustering of general images, which it is not to be applied on digital photo clustering and classification. Recently, some specialized clustering algorithms for images clustering digital camera images were proposed. These algorithms exploit mainly the statistics of time gap between sequent photos. Though they showed a quite good result in image clustering for digital cameras, still lots of improvements are remained and unsolved. For example the current tools ignore completely the image transformation with the different focal lengths. In this paper, we present a photo considering focal length information recorded in EXIF. We propose an algorithms based on MVA(Matching Vector Analysis) for classification of digital images taken in the every day activity. Our experiment shows that our algorithm gives more than 95% success rates, which is competitive among all available methods in terms of sensitivity, specificity and flexibility.

• Journal of KIISE
• /
• v.41 no.10
• /
• pp.810-823
• /
• 2014

The wireless mesh network based on IEEE 802.11s provides a routing based on a destination address as it inherits legacy internet architecture. However, this architecture interested in not 'what' which is originally the users goal but 'where'. Futhermore, because of the rapid increase of the number of mobile devices recently, the mobile traffic increases geometrically. It reduces the network effectiveness as increasing many packets which have same payload in the situation of many users access to the same contents. In this paper, we propose an OpenFlow-based contents routing for the wireless mesh network(WMN) to solve this problem. We implement contents layer to the legacy network layer which mesh network uses and the routing technique based on contents identifier for efficient contents routing. In addition we provide flexibility as we use OpenFlow. By using this, we implement caching technique to improve effectiveness of network as decreasing the packet which has same payload in WSN. We measure the network usage to compare the flooding technique, we measure the delay to compare environment using caching and non caching. As a result of delay measure it shows 20% of performance improve, and controller message decrease maximum 89%.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.5
• /
• pp.48-56
• /
• 2011

The objective of this study is to develop quantitative criteria for setting reasonable standards and regulations for building heights in collective facility districts inside national parks or those connected to their borders. Heights of all building sin collective facility districts were simulated in order to determine heights of ridge lines of sight passing the upper parts of buildings from a main view point. Where a facility's zone is located at the inside or boundary of inland mountainous national parks, and there are coastal type national parks with mountains in the background, the study recommended assigning the maximum allowable height of a building as 8.82m if national park authorities intend to preserve the ridges at three-tenths the height of a mountain. It amounts to 3 or 3.5 stories when it is converted into the number of floors. It is desirable to apply this standard to accommodations like a hotel except lodge or cottage as the maximum allowable height of a building. Nevertheless, when there aren't back mountainous areas among coastal-type national parks, there is a need for applying a separate standard. If an equal and uniform standard is applied to all collective facility districts, it becomes difficult to address local differences when managing landscape. There must be flexibility when applying a standard, depending on variables such as location of view points, differences in the methods of selection of view points, and differences in view angles, etc. Thus, there is a need for different landscape management strategies that address the unique natural environment of different zones.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1411-1417
• /
• 2010

CFRP (Carbon Fiber Reinforced Plastic) has received considerable attention in various fields as a structural material, because of its high specific strength, high specific stiffness, excellent design flexibility, favorable chemical properties, etc. Most products consisting of several parts are generally assembled by mechanical joining methods (using rivets, bolts, pins, etc.). Holes must be drilled in the parts to be joined, and the strength of the components subjected to static and fatigue loads caused by stress concentration must be decreased. In this study, we experimentally evaluated the variation in the residual strength of a holenotched CFRP plate subjected to fatigue load. We repeatedly subjected the hole-notched specimen to fatigue load for a certain number of cycles, and then we investigated the residual strength of the hole-notched specimen by performing the fracture test. From the results of the test, we can observe the initiation of a directional crack caused by the applied fatigue load. Further, we observed that the residual strength increases with a decrease in the notch effect due to this crack. It was evaluated that the residual strength increases to a certain level and subsequently decreases. This variation in the residual strength was represented by a simple equation by using a model of the decrease in residual strength for plain plate, which was developed by Reifsnider and a stress redistribution model for hole-notched plate, which was developed by Yip.

• Journal of Korean Academy of Nursing
• /
• v.24 no.4
• /
• pp.568-583
• /
• 1994

In the changing social and economic conditions, reorientation of the health care system is a process of rearranging health care resources keeping in mind the appropriativeness, relevancy, and efficacy of health care programs. Also it has been recognized recently that the CHP program is in need of review for the same reasons, that is to say, the ease in which health care facilities are available, the high rate of coverage with insurance and the development of an effective transportation system. Therefore there is a social inclination to think that there are no remote areas and to question the roles of public health facilities, health centers, health sub centers and CHP posts. This paper was done to review problems and to propose new directions for the CHP system. The findings of this study are as follows ; 1) It is necessary that primary health care should be simplified into three parts, medical treatment, preventive care services and the organization of administration and logistics. Also each department should be supplemented with the appropriate professional personnel in order to develop a task oriented system. The reorientation of the CHP system should be managed in keeping with that of other public health care systems. Therefore it is necessary to look at the CHP system problems as one aspect of the reorientation process of public health care systems, and to work to find new ways to address these problems. 2) The location of the CHP post should be decided by the needs of the community in both the medical and preventive areas. If the people have a minimum need, the location of the CHP post should be altered and the existing roles of the CHP should be modified to allow for flexibility according to the community needs. 3) Use of the problem solving method in regular team meetings will prove to be as efficient as continuing education programs in improving job competancy. 4) The supervision of CHP's activities should be made by the same type professional personnel, that is, senior CHPs or charge nurses in the public health center at the county level. 5) The operational expensies of CHP post should be supported by the administrative department of the public health center and should create working conditions that will allow the CHP to concentrate on community health service programs. 6) The organizations for community participation, working committees, community health workers and a number of the local assembly, should be activated to provide for participation in finding solutions to health related problems in the com-munity.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.4 no.4
• /
• pp.43-61
• /
• 1981

Interest in the Quality of working life is spreading rapidly and the phrase has entered the popular vocabulary. That this should be so is probably due in large measure to changes in the values of society, nowadays accelerated as never before by the concerns and demands of younger people. But however topical the concept has become, there is very little agreement on its definition. Rather, the term appears to have become a kind of depository for a variety of sometimes contradictory meanings attributed to it by different groups. A list of all the elements it if held to cover would include availability and security of employment, adaquate income, safe and pleasant physical working conditions, reasonable hours of work, equitable treatment and democracy in the workplace, the possibility of self-development, control over one's work, a sense of pride in craftsmanship or product, wider career choices, and flexibility in matters such as the time of starting work, the number of working days in the week, Job sharing and so on altogether an array that encompasses a variety of traditional aspirations and many new ones reflecting the entry into the post industrial era. The term "quality of working life" was introduced by professor Louis E. Davis and his colleagues in the late 1960s to call attention to the prevailing and needlessly poor quality of life at the workplace. In their usage it referred to the quality of the relationship between the worker and his working environment as a whole, and was intended to emphasize the human dimension so often forgotten among the technical and economic factors in job design. Treating workers as if they were elements or cogs in the production process is not only an affront to the dignity of human life, but is also a serious underestimation of the human capabilities needed to operate more advanced technologies. When tasks demand high levels of vigilence, technical problem-solving skills, self initiated behavior, and social and communication skills. it is imperative that our concepts of man be of requisite complexity. Our aim is not just to protect the worker's life and health but to give them an informal interest in their job and opportunity to express their views and exercise control over everything that affects their working life. Certainly, so far as his work is concerned, a man must feel better protected but he must also have a greater feeling of freedom and responsibility. Something parallel but wholly different if happening in Europe, industrial democracy. What has happened in Europe has been discrete, fixed, finalized, and legalized. Those developing centuries driving toward industrialization like R.O.K, shall have to bear in mind the human complexity in processing and designing the work and its environment. Increasing attention is needed to the contradiction between autocratic rule at the workplace and democratic rights in society.n society.

• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.1009-1016
• /
• 2006

Under foundational precepts of Grid computing, two important requirements that all Grid application systems should satisfy are to accommodate the dynamic nature of Virtual Organizations (VOs), and to enforce different levels of security among different VOs. For the research described in this paper, we developed two different use-case scenarios addressing the two requirements, and then showed how the requirements can be met by implementing a Grid information retrieval (GIR) system prototype. The dynamic nature of VO applies not only to increasing and decreasing number of users, but also to the dynamically changing requirement of computing power among the different subcomponents that consist in overall system configuration. This implies that a request to increase computing power by a certain subcomponent can be satisfied by other idling subcomponents taking advantage of overall system flexibility. This paper describes how we implemented a Grid IR system using VO and security mechanisms provided by Globus toolkit 3.0, and shows how GIR system scalability and security can be improved for dynamic VOs. In order to manage different VOs, we implemented VO management service (VOMS), and registered it to Globus as an additional service.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.155-166
• /
• 2009

Road design safety assessment by existing tools and methods have normally been examined by expert judgements using design documents and on-site inspections. The existing methods, however, have two main problems such as insufficiency of objectiveness and inability to measure effects of accident countermeasures. This paper studies ways to develop a road safety assessment system through reviewing the IHSDM developed in USA. The crash prediction module of IHSDM calculate accident frequency and rate of roadway segments using accident prediction models and accident modification factors for safety evaluation. The methodology of evaluation and development of accident modification factors somewhat overcome the problems of the existing methods. In spite of these advantages, IHSDM could not relevantly reflect characteristics of domestic rural roadways since it overestimate the number of accidents and rate of korean rural roadways. Especially, IHSDM may not evaluate or consider land use patterns of Korean roadways, and futhermore, original environment on base conditions used to develop IHSDM may not be different from ours. The user requirements being developed for a road safety assessment system for Korean roadways include enhanced flexibility and diversity of data input-output processes.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.2
• /
• pp.165-182
• /
• 2001

In this paper, we describe a design and implementation of the Wireless Markup Language(WML) compiler to deploy wireless Internet services effectively. The WML compiler translates textual WML decks into binary ones in order to reduce the traffic on wireless links that have relatively low bandwidth to wireline links and mitigate the processing overhead of WML decks on, wireless terminals that have relatively low processing power to fixed workstations. In addition, it takes over the overhead of eXtensible Markup Language(XML) well-formedness and validation processes. The WML compiler consists of the lexical analyzer and parser modules. The granunar for the WML parser module is LALR(1) context-free grammar that is designed based on XML 1.0 and WML 1.2 DTD(Document Type Definition) with the consideration of the Wireless Application Protocol Binary XML grammar. The grammar description is converted into a C program to parse that grammar by using parser generator. Even though the tags in WML will be extended or WML DTD will be upgraded, this approach has the advantage of flexibility because the program is generated by modifying just the changed parts. We have verified the functionality of the WML compiler by using a WML decompiler in the public domain and by using the Nokia WAP Toolkit as a WAP client. To measurethe compressibility gain of the WML compiler, we have tested a large number of textual WML decks and obtained a maximum 85 %. As the effect of compression is reduced when the portion of general textual strings increases relative to one of the tags and attributes in a WML deck, an extended encoding method might be needed for specific applications such as compiling of the WML decks to which the Hyper Text Markup Language document is translated dynamically.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.