• 수산해양기술연구
• /
• 제27권4호
• /
• pp.313-320
• /
• 1991

본 연구에서는 전달영향계수법의 개념을 사각형 평판의 자유진동해석에 적용하여, 그 계산결과들을 전달매트릭스법 및 엄밀해 또는 Leissa 방법의 결과와 비교하여 그 유용성을 확인하였다. 전달영향계수법은 전달매트릭스법으로는 구하기 곤란한 고차의 고유진동수에 대해서도 정도좋게 구할 수 있으며, 계산속도의 면에서도 전달매트릭스법보다 우수함을 알 수 있었다. 또한, 전달영향계수법은 모든 경계조건 및 중간 경탄성 지지조건도 전단 및 회전 스프링정수 값의 조절만으로 간편하게 대응시킬수 있었다

• Wind and Structures
• /
• 제16권1호
• /
• pp.1-23
• /
• 2013

The wind-induced transient response of internal pressure following the creation of a sudden dominant opening during the occurrence of high external pressure, in low-rise residential and industrial buildings was numerically investigated. The values of the ill-defined parameters namely the flow contraction coefficient, loss coefficient and the effective slug length were calibrated by matching the analytical response with the computational fluid dynamics predictions. The effect of a sudden i.e., "instantaneously created" windward opening in the Texas Technical University (TTU) test building envelope was studied for two different envelope flexibility-leakage combinations namely: (1) a quasi-statically flexible and non-porous envelope and (2) a quasi-statically flexible and porous envelope. The responses forced by creating the openings at different time leads/lags with respect to the occurrence of the peak external pressure showed that for cases where the openings are created in close temporal proximity to the peak pressure, the transient overshoot values of internal pressure could be higher than the peak values of internal pressure in the pre-sequent or subsequent resonant response. In addition, the influence of time taken for opening creation on the level of overshoot was also investigated for the TTU building for the two different envelope characteristics. Non-dimensional overshoot factors are presented for a variety of cavity volume-opening area combinations for (1) buildings with rigid/quasi-statically flexible non-porous envelope, and (2) buildings with rigid/quasi-statically flexible and porous envelope (representing most low rise residential and industrial buildings). While the factors appear slightly on the high side due to conservative assumptions made in the analysis, a careful consideration regarding the implication of the timing and magnitude of such overshoots during strong gusts, in relation to the steady state internal pressure response in cyclonic regions, is warranted.

• Smart Structures and Systems
• /
• 제5권5호
• /
• pp.507-515
• /
• 2009

The present work is an alternative methodology in order to balance a nonlinear highly flexible rotor by using neural networks. This procedure was developed aiming at improving the performance of classical balancing methods, which are developed in the context of linearity between acting forces and resulting displacements and are not well adapted to these situations. In this paper a fully experimental procedure using neural networks is implemented for dealing with the adaptive balancing of nonlinear rotors. The nonlinearity results from the large displacements measured due to the high flexibility of the foundation. A neural network based meta-model was developed to represent the system. The initialization of the learning procedure of the network is performed by using the influence coefficient method and the adaptive balancing strategy is prone to converge rapidly to a satisfactory solution. The methodology is tested successfully experimentally.

• Structural Engineering and Mechanics
• /
• 제62권3호
• /
• pp.325-344
• /
• 2017

The present paper investigates the propagation of Love-type wave in a composite structure comprised of imperfectly bonded piezoelectric layer with lower fiber-reinforced half-space with rectangular shaped irregularity at the common interface. Closed-form expression of phase velocity of Love-type wave propagating in the composite structure has been deduced analytically for electrically open and short conditions. Some special cases of the problem have also been studied. It has been found that the obtained results are in well-agreement to the Classical Love wave equation. Significant effects of various parameters viz. irregularity parameter, flexibility imperfectness parameter and viscoelastic imperfectness parameter associated with complex common interface, dielectric constant and piezoelectric coefficient on phase velocity of Love-type wave has been reported. Numerical computations and graphical illustrations have been carried out to demonstrate the deduced results for various cases. Moreover, comparative study has been performed to unravel the effects of the presence of reinforcement and piezoelectricity in the composite structure and also to analyze the existence of irregularity and imperfectness at the common interface of composite structure in context of the present problem which serves as a salient feature of the present study.

• 간호행정학회지
• /
• 제12권4호
• /
• pp.604-614
• /
• 2006

Purpose: This study was to identify factors that influence the organizational commitment and job satisfaction of nurses. Method: The data were collected from 1st, August until 7th, August, 2005. The subjects were 238 nurses from a general hospital in Busan. Data were analyzed with descriptive statistics, t-test, one-way ANOVA, Pearson correlation coefficient, and stepwise multiple regression using SPSS program. Result: The organizational commitment and job satisfaction was significant positive correlations with flexibility, satisfaction, competence factors and significant negative correlations with empathy factors and centralization factor. The most powerful predictors of Nurses's organizational commitment and job satisfaction was managerial strategy of organizational characteristics. And, satisfaction factors of professional self-concept, affiliative-dominant culture and conservative- dominant culture and innovative-dominant culture were powerful predictor factors. The Other powerful predictors of nurses's job satisfaction were satisfaction factors of professional Self-concept, communication and centralization factor of organizational characteristics, affiliative-dominant culture and conservative-dominant culture, professional image factor of nurse image. Conclusion: This study revealed that important factors for nurses's organizational commitment and job satisfaction. Consequently, the manager should be make effective managerial strategy and encourage that nurse have more satisfy to professional self-concept. And the manager make constant efforts to create an affiliative culture in hospital.

• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.168-173
• /
• 2002

The durability test, along with the crashworthiness test, requires the most time and expense in the vehicle development process. The durability design using CAE tools reduces the time required for both the durability test and actual vehicle production. Existing dynamic stress analyses designed fir the analysis of vehicle fatigue mainly calculate the dynamic stress history and fatigue after performing dynamic analysis and stress analysis with relevant software applications and then superpositioning the dynamic load history and stress influence coefficient at each joint. This approach is a complex process, taking into account the flexibility of the parts. It is, however, incapable of giving accurate consideration to the contacts between components, the non-linearity of materials, and tire-road surface interactions. This approach also requires that the analysts have an expertise in software applications of various kinds or an expert in each area must perform the analysis. This requires as a great deal of manpower and time. In order to complement the existing approaches for dynamic stress analysis, this study aims at the following: (1) to suggest the simple and accurate analysis technique which is capable of producing all the possible necessary results; (2) to reduce dramatically the time and manpower needed to construct a model designed to analyze dynamics, quasi-static stress, and fatigue; and (3) to enable an accurate analysis of fatigue by improving the accuracy of dynamic stress. we verify the presented analysis method through durability evaluation of the knuckle of passenger car.

• 가정과삶의질연구
• /
• 제34권5호
• /
• pp.69-82
• /
• 2016

The purpose of this study was to explore mediating effects of interpersonal competence, gratitude disposition between childcare teachers positive psychological capital and happiness. The subjects of the study were a total 231 Childcare in Seoul. The statistics program used to achieve the purpose was SPSS/PC+18.0. The statistics methods applied were pearson correlation coefficient, simple linear regression, and multiple linear regression. The major results of this study were summarized as follows: First, Positive psychological capital and interpersonal competence, and gratitude disposition from happiness was found to be positively correlated. Second, interpersonal competence had an affect on childcare teachers happiness. These effects are mediated in part by the control interpersonal competence showed. Third, gratitude disposition affects childcare teachers happiness. These effects are mediated in part by the gratitude disposition showed. These results suggest that dispositional gratitude and cognitive flexibility play an important role in the development of happiness for childcare teachers.

• 한국기계연구소 소보
• /
• 통권13호
• /
• pp.143-161
• /
• 1984

The mass balancing of rotors is an integral part of the study practice of the rotor dynamics. Any machine with rotating components is considered to be rotating machine. The part of a rotating machine that rotates in normal operation is generally reffered to as a rotor. A rotor is flexible if it deforms when the machine is operating at any speed up to its maximum design speed. Otherwise, the rotor is rigid. The general Purpose of the study of rotor dynamics is to increase understanding of rotor vibration phenomena and thus provide a means for controlling or eliminating these vitrations. As the efficiency of rotating machinery has been increased through reduced weight and increased speed, which implies increasement of rotor flexibility, the control of rotor vibration has become essential. Thus, the study and practice of rotor dynamaics has taken on an increasingly important role in recent years. Therefore many workers have studied about this and introduced a few balancing methods of flexible rotor, which can be classified mainly in following four sorts, 1. Polar plotting methed 2. Modal balancing method 3. Influence coefficient method 4. Unified balancing approach In this paper practical theories of rotor dynamics related to flexible rotor balancing have been reviewed and confirmed the calculation results of flexible balancing of typical rotor, as an example, respectively

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.473-476
• /
• 2003

This paper shows necessity of encapsulation layer to maximite flexibility of brittle indium-tin-oxide (ITO) on polymer substrates. And, Young's modulus (E) of encapsulation layer have an significant effect on external bending stress and the coefficient of thermal expansion (CTE) of that have a significant effect on internal thermal stress. To compare magnitude of total mechanical stress including both bending stress and thermal stress, the mechanical stress of triple-layer structure (substrate / ITO / encapsulation layer or substrate / buffer layer / ITO) can be quantified and numerically analyzed through the farthest cracked island position. As a result, it should be noted that multi-layer structures with more elastic encapsulation material have small mechanical stress compared to that of buffer and encapsulation structure of large Young's modulus material when they were externally bent.

• 수산해양기술연구
• /
• 제27권4호
• /
• pp.303-312
• /
• 1991

직선상 2층 구조물의 임의의 절점에 변위벡터가 불연속인 죠인트 요소를 갖는 경우, 면내 굽힘 자유진동을 해석하기 위한 알고리즘을 전달영향계수법에 의해 정식화하고, 간단한 모델에 의해 수치실험을 행한 결과, 다음과 같이 요약할 수 있다. (1) 전달영향계수법은 종래의 전달매트릭스법에 비해 계산정도 및 계산속도 양면에서 우수함을 확인할 수 있다. (2) 구조물의 임의의 중간 절점에서 상태벡터량(횡변위, 각변위, 전단력 및 모멘트 등) 중 일부의 물리량이 불연속성을 갖더라도, 알고리즘 자체를 변화시켜야 하는 전달매트릭스법과는 달리, 스프링전수 값의 조절만으로 간단히 처리할 수 있어, 알고리즘의 일반화 및 프로그램의 범용화가 가능하다. (3) 전달영향계수법에서는, 구조물의 중간에 반고정지지와 같은 단단한 탄성지지부가 다수 존재하는 경우에도, 기본적인 알고리즘을 변경할 필요 없이 전단 및 회전 스프링정수에 적당한 값을 대입하는 것만으로 중간조건에 대응시킬 수 있고, 모든 경계조건도 마찬가지로 처리할 수 있다.