• 한국의류학회지
• /
• 제30권8호
• /
• pp.1242-1252
• /
• 2006

Many applications in computer graphics require complex, highly detailed models. However, to control processing time, it is often desirable to use approximations in place of excessively detailed models. Therefore, we have developed the notion of an optimal matrix to simplify the model surface which can then rapidly obtain high quality 2D patterns by flattening the 3D surface. Firstly, the woman's 3D body was modeled based on Size Korea data. Secondly, the 3D model was divided by shell and block for the pattern draft. Thirdly, each block was flattened by the grid and bridge method. Finally, we select the optimal matrix and demonstrate it's efficiency and quality. The proposed approach accommodates surfaces with darts, which are commonly utilized in the clothing industry to reduce the deformation of surface forming and flattening. The resulting optimal matrix could be an initiation of standardization for pattern flattening. This can facilitate much better approximations, in both efficiency and exactness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.203-204
• /
• 2013

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1793-1799
• /
• 2016

As one of the main trends in global industries is eco-friendly energy, the interest on Electric Vehicle(EV) has been increased. However, if large amount of EVs start to charging, it could cause rapid increase in demand power of the power system. To guarantee stable operation of the power system, those unpredictable power consume should be mitigated. In this paper, therefore, we propose a practical smart EVs charging scheme to prevent the rapid increase of the demand power and also provide load flattening function. For that we considered Time-of-Use(ToU) price and actual data such as driving pattern and parameters of distribution system. Simulation results show that the proposed method provides proper load flattening function while preventing the rapid increase of the demand power of the power system.

• 센서학회지
• /
• 제26권1호
• /
• pp.44-49
• /
• 2017

In this paper, the automatic sweep flattening for wavelength swept laser of SS-OCT has implemented. Through its performance test applied to the laser, 50 nm flat sweeping range, ${\pm}0.5dB$ fluctuation range, 22 sec the time required, and 10 mW average optical power were obtained. This shows that the realized automatic process can replace the inconvenient manual operation used for polarization control of current sweeping laser. Additionally it cuts costs for optical spectrum analyzer necessary to sweep monitoring.

• 한국멀티미디어학회논문지
• /
• 제20권3호
• /
• pp.456-464
• /
• 2017

The epigraphy is a text on metal or a text on stone. The value of epigraphy can be used to identify historical facts of the past. It is a good record to understand the past life and culture. But it is difficult to decode the character of the epigraphy which has been exposed to the outdoor for a long time. In this study, the proposed techniques are consisted of 3 parts: (1)The surface division into information area, non- information area, and undifferentiated area. And then, (2) The selection of points in the non-information area and finding a reference plane with the minimum error. (3) Flattening the points perpendicular to the reference plane and decoding characters on information area. This research contributes to narrow the scope of a particular letter and to read the controversial letters on the Pohang Jungsoengri Silla Stone Monument(Korea's national treasure number 318).

• 한국광학회지
• /
• 제14권1호
• /
• pp.8-11
• /
• 2003

기계적으로 유도된 소자형 장주기 광섬유격자를 처음으로 제작해 보았다. 본 연구의 장주기 광섬유격자 소자는 제작이 용이하며. 다른 광 소자나 시스템에 적용 또는 장착이 가능하다는 장점을 가지고 있다. 또한, 제작된 장주기 광섬유격자 소자는 격자 제작시 중심파장과 투과손실을 가변할 수 있는 특징을 가지고 있다. 장주기 광섬유격자 소자의 제작원리를 살펴보고, 제작된 장주기 광섬유격자의 파장가변 특성과 압력에 따른 투과특성을 실험해 보았으며, 장주기 광섬유격자 소자를 EDFA의 이득 평탄화 실험에 적용해 보았다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.381-384
• /
• 2002

In speech signal processing, it Is very important to detect the pitch exactly in speech recognition, synthesis and analysis. but, it is very difficult to pitch detection from speech signal because of formant and transition amplitude affect. therefore, in this paper, we proposed a pitch detection using the spectrum flattening techniques. Spectrum flattening is to eliminate the formant and transition amplitude affect. In time domain, positive center clipping is process in order to emphasize pitch period with a glottal component of removed vocal tract characteristic. And rough formant envelope is computed through peak-fitting spectrum of original speech signal in frequency domain. As a results, well get the flattened harmonics waveform with the algebra difference between spectrum of original speech signal and smoothed formant envelope. After all, we obtain residual signal which is removed vocal tract element The performance was compared with LPC and Cepstrum, ACF 0wing to this algorithm, we have obtained the pitch information improved the accuracy of pitch detection and gross error rate is reduced in voice speech region and in transition region of changing the phoneme.

• 한국광학회지
• /
• 제13권5호
• /
• pp.373-376
• /
• 2002

비대칭 구조의 커플러에 대한 이론적 고찰과 함께 EDFA 이득평탄용 필터로서의 응용과 그에 대한 설계를 하였다. 이득평탄필터를 구현하기 위한 비대칭 커플러의 광섬유 파라미터를 제시하였고 커플러의 광 결합 길이와 코어간의 거리에 따른 이득평탄필터의 투과 스펙트럼의 특성을 시뮬레이션을 통해 알아보았다. 그리고 시뮬레이션 결과를 바탕으로 하여 약 30nm의 대역폭에 걸쳐서 EDFA의 이득 스펙트럼을 $\pm$0.75 ㏈이하로 평탄화할 수 있는 이득평탄필터를 설계하였다.

• 대한방사선치료학회지
• /
• 제26권2호
• /
• pp.363-368
• /
• 2014

목 적 : Flattening filter-free (3F) beam과 flattening filter (2F) beam을 이용한 치료기법에 따른 특성 비교와 환자 측면의 시간적 경제적 유용성을 비교 평가하고자 한다. 대상 및 방법 : Alderson rando phantom의 전산화단층촬영 영상을 획득하여 가상의 전립선을 설정한 후 세기변조 방사선치료, 용적변조 회전방사선치료 그리고 체부정위적 방사선치료에 3F와 2F beam을 각각 적용하여 총 6개의 전산화치료계획을 수립하였다. 선량률은 3F beam을 이용한 치료기법에 1200 MU/min을 설정하였고, 2F beam의 경우 600 MU/min을 적용하였다. 3F와 2F beam을 이용한 치료기법의 특성 비교를 위하여 총 monitor unit (MU)값을 비교하였고 치료시간의 비교를 위하여 beam on time (BOT)과 gantry rotation time (GRT)을 측정하였으며, 3F와 2F beam에 의한 각 치료기법에서 발생되는 광중성자 측정을 위하여 Surveillance And Measurement (SAM) 940을 사용하였다. 또한, 환자의 총 내원기간과 자기부담금을 계산하였다. 결 과 : 총 MU값은 세기변조 방사선치료에서 3F beam을 이용하였을 때 2F beam을 이용한 경우보다 최대 34.0% 증가하였고 BOT, GRT 그리고 광중성자 측정값은 체부정위적 방사선치료에 3F beam을 적용하였을 때 2F beam보다 각각 최대 39.8, 38.6, 48.1% 감소하였다. 환자의 총 내원기간과 자기부담금은 3F와 2F beam의 이용에 따른 차이는 없었으며, 치료기법 중 체부정위적 방사선치료가 10일과 169,560원으로 가장 적게 나타났다. 결 론 : 본 연구 결과, 3F beam의 고 선량률을 이용한 치료기법은 2F beam과 비교하여 총 MU값은 증가하였으나 BOT, GRT 그리고 광중성자 측정값이 모두 감소하였다. 이처럼 3F beam의 고 선량률을 사용하는 치료기법은 intra-fraction setup error 및 2차 방사선 유발암 발생률을 줄이는 효과를 기대할 수 있으나, 동일한 치료기법 내에서 3F와 2F beam 사용에 따른 환자에게 특별한 시간적 경제적인 이점은 없었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1985년도 하계학술회의논문집
• /
• pp.144-147
• /
• 1985

In electricity industry, the improvement of load factor by flattening of load has been considered to be more important than any other tasks and has received wide concern and interest. Especially while annual peak load had occured early evening in winter during past decades, but we found the trend has changed so that annual peak load occured during the daytime in summer since1981 The useful practicing methods of this load management ale as follows; 1. Inducing of midnight load by thermal storage water heating 2. Seasonal differential rates. 3. Revising the peak load priceing (Time-of -use) It seems hard to expect that load research can be carried out in a short time, and we all have to exert outselves continuously to provide efficient load management method without wasting resources.