• 대한기계학회논문집
• /
• 제3권4호
• /
• pp.164-172
• /
• 1979

Experimental and numerical results concerning the flat punch indentation to semi-infinite body with partially constrained free surface are presented The distributions of slip line directions are predicted by Moire fringe analysis using Vinckier's method. A mumerical study is made of the same problem by finite element method and the results are compared with the experimental results. It is shown that the contour feature of possible slip line field is similar to that of well-known Prandtl indentation sloution.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.324-328
• /
• 2002

Recently, in machining industry much progress has been made by taking advantage of high speed machining. On the other hand as disadvantage high speed machining involves shortening the life of cutting tool. In this research we want to evaluate the performance of appropriate endmill for high speed machining in accordance with surface roughness of land width and clearance angle of flat-endmill

• 환경영향평가
• /
• 제23권2호
• /
• pp.150-156
• /
• 2014

The aim of this study is to detection of changed vegetation area of Saemangeum tidal flat with comparison of topography and surface sediments during the dyke construction. Sedimentary facies of four seasons of 2001 from inside Saemangeum tidal flat revealed homogeneous layers in the upper part, however near sea side tidal flat were detecting with carried out rapid sediment deposition during the dyke construction using satellite image spatial analysis. The sedimentation types inside Saemangeum tidal flat were classified with vegetation types, which were well matched with the sedimentation pattern revealed by change in vegetation patterns.

• Environmental Engineering Research
• /
• 제17권2호
• /
• pp.77-82
• /
• 2012

The spatial variation of organic matter sources in tidal flat sediment of the Nanakita River estuary, involving Gamo lagoon on the north-east coast of Honshu Island, Japan, was examined using carbon stable isotopes and fatty acid biomarkers. The spatial variation of total organic carbon (TOC) contents and ${\delta}^{13}C$ values were highly variable in between the stations, such as sandy flat (1.3 mg/g, -21.0‰), sand-muddy flat (2.6 mg/g, -21.9‰), and muddy flat (24.9 mg/g, -25.9‰), respectively. Particularly, at the muddy flat, high TOC content and low ${\delta}^{13}C$ value of the sediments indicated that the surface sediment was composed largely of terrestrial organic matter. Whereas, at the sandy flat and sand-muddy flat, the high ratios of diatom and bacteria biomarkers indicated the high contribution of abundant microorganism along with marine organic matter in sediment composition. From these results, it considered that the amount and origin of transported sedimentary organic matter indicated different characteristics in this study stations.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1990년도 제12회 학술강연회초록집
• /
• pp.16-35
• /
• 1990

The mechanism of failure of lubricated surfaces at high sliding speeds was Investigated. Experiments were performed with the ball-on-flat and cylinder-on-flat geometries, using lubricants of four different chemical reactivities. Surface failure was found to not be predictable using the ratlo, $\lambda$, of fluid film thickness to composite surface roughness except when chemically inert lubricants are used. Even then the influence of temperature rise on fluid film thickness does not adequately explain the low load carrying capacity of lubricants at high sliding speeds. which causes surface failure. The protective layers on sliding surfaces that form by chemical reaction with the lubricant were found to reduce the surface roughentrig and Increase the load carrying capacity of surfaces to values of $\lambda$ as low as 0.03. Neither the surface toughening nor the formation of the protective layers have been incorporated Into failure models for lubricated systems.

• 한국생산제조학회지
• /
• 제9권4호
• /
• pp.75-84
• /
• 2000

The main goal of our research is to compensate the milled surface errors induced by the tool deflection effects, which occur during the milling process. First, we predict cutting forces and tool deflection amount. Based on predicted deflection effects, we model milled surface shapes. We present a compensation methodology , which can generate a new tool trajectory, which is determined so as to compensate the milled surface errors. By considering manufacturing tolerance, tool path compensation is generalized. To validate the approaches proposed in this paper, we treat an illustrative example of profile milling process by using flat end mill. Simulation and experimental results are shown.

• 한국유체기계학회 논문집
• /
• 제6권3호
• /
• pp.15-20
• /
• 2003

For measuring friction factor of artificially-roughened surfaces which are usually applied to damper seals, flat plate test apparatus is designed and fabricated. The measurements of leakage flow and pressure distribution through round-hole patterned specimen with different hole areas are described, and a method is discussed for determining the friction factor experimentally. Results show that the friction factor of the round-hole patterned surface is bigger than that of smooth surface, and increases as increasing the hole area. A empirical friction factor model for the round-hole patterned surface can be descrived by the Moody's friction factor formula.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.300-300
• /
• 2011

Si oxidation is a key process in developing silicon devices, such as highly integrated metal-oxide-semiconductor (MOS) transistors and antireflection-coating (ARC) on solar cell substrate. Many experimental and theoritical studies have been carried out for elucidating oxidation processes and adsorption structure using ab initio total energy and electronic structure calcultaions. However, the initial oxidation processes at step edge on vicinal Si surface have not been studied using the ReaxFF reactive force field. In this work, strucutural change, charge distribution of oxidized Si throughout the depth from Si surface were observed during oxidation processes on vicinal Si(001) surface inclined by $10.5^{\circ}$ of miscut angle toward [100]. Adsorption energys of step edge and flat terrace were calculated to compare the oxidation reaction at step edge and flat terrace on Si surface.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권4호
• /
• pp.453-460
• /
• 2005

Experiments were conducted to investigate the effect of the surface roughness on the flat plate turbulent boundary layer. The square rods were installed at the leading edge to make surface roughness. The particle image velocimetry was used to measure the mean velocities and velocity fluctuation component. All measurements were made over a range of w/k=1. 2 5 and $Re_x=80.000{\sim}360,000$. Friction velocity was measured by using Clauser plot method. The level of turbulent intensities on roughness surface appears more strongly than that of turbulent intensities on flat plate. A correlation of boundary layer thickness in term of $Re_x$ and w/k are presented.

• 대한원격탐사학회지
• /
• 제39권5_1호
• /
• pp.537-549
• /
• 2023

갯벌 퇴적물 성분의 분포 특성은 연안환경 분석, 환경영향평가에서 기초자료로 활용되기 때문에 신뢰성 높은 갯벌 표층 퇴적상 분포도를 제작하는 것은 매우 중요하다. 이 연구에서는 갯벌 퇴적상 분포도를 생성하기 위해 회귀 크리깅(regression kriging)의 적용성을 평가하였다. 이를 목적으로, 갯벌 표층 퇴적상 분류 과정에서 현장조사 자료의 수, 부가자료의 종류, 회귀 크리깅에 적용되는 회귀 모형의 영향과 다른 예측 기법(단변량 크리깅, 회귀 분석)과의 비교와 같은 다양한 요인의 영향을 조사하였다. 회귀 크리깅의 적용성 평가를 위해, 우리나라 태안군 안면도에 위치한 황도 갯벌을 대상으로 무인기 자료를 이용한 사례 연구를 수행하였다. 사례연구 결과, 신뢰성 높은 갯벌 표층 퇴적상 분포도를 제작하기 위해서는 적절한 수의 현장조사 자료 확보와 함께 지형 고도와 조류로 밀도도를 부가자료로 이용하는 것이 가장 중요한 것으로 나타났다. 또한 초고해상도 무인기 자료를 이용하여 퇴적물 분포의 상세한 특성을 고려할 수 있는 회귀 크리깅이 다른 기법과 비교해서 예측 성능이 가장 우수한 것으로 나타났다. 이러한 연구 결과는 갯벌 표층 퇴적상 분포도 제작에 가이드라인으로 활용될 수 있을 것으로 기대된다.