• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.483-486
• /
• 2002

Injection of microbubbles and/or polymer solution has been known to be a promising method for the reduction of frictional drag of water-borne vehicles. Naval Architects have been interested in friction drag reduction technology, since the friction drag of a commercial ship can be over $70{\%}$ of total resistance. The reduction of friction drag is also important for autonomous underwater vehicles and naval submarines to improve their durability and survivability In this study two sets of experiments were carried out for the friction drag reduction of 2-D channel wall and flat plate in the circulating water channels in Chungnam National University. Preliminary results from the experiments are presented and discussed.

• 한국가시화정보학회지
• /
• 제14권1호
• /
• pp.27-32
• /
• 2016

The reduction of $CO_2$ emissions has been a key target in the Marine Industry since the IMO's Marine Environment Protection Committee published its findings in 2009. The representative emission index is termed as the EEDI (Energy Efficiency Design Index) for the new ships. Among various flow control techniques ever proposed, the air lubrication method is the one of most promising one in terms of practical applicability. The present study examines the basic characteristics of the flat plate test with intention of applying the air lubrication technology to the reduction of the resistance of a ship. Image analysis technique is proposed as a tool to quantify the effectiveness of the air lubrication method.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1000-1002
• /
• 2017

본 연구에서는 내재적 이중시간 전진기법을 이용한 비정상 Navier-Stokes 코드를 개발하였다. 내재적 이중시간 전진기법은 가상시간에 대한 새로운 잔류항을 도입하는 개념으로 비정상 잔류항에 실시간 미분항을 더한 잔류항을 가상시간으로 푸는 기법이다. 비정상 코드 검증 방법으로 Stokes 2nd 문제인 '주기성 하모닉 진동을 하는 평판 위의 층류 유동'을 해석하였다. 계산된 속도분포와 마찰계수를 방정식 이론적 해와 비교한 결과 매우 근접한 수치해를 얻을 수 있었다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.211-212
• /
• 2002

Friction and wear of pressureless sintered Ti(C,N)-WC ceramics were studied using a ball-on-reciprocating flat apparatus in open air. The silicon nitride ball and the cemented carbide (WC-Co) ball were used against the Ti(C,N)-WC plate samples. The friction coefficients of the Ti(C,N)-WC samples against the silicon nitride ball and the cemented carbide ball were about 0.57 and 0.3, respectively. The wear coefficient of the sample without WC addition was 5 times as large as that of the sample with 10 mole % WC addition when tested against the silicon nitride ball under 98 N. The higher wear coefficient of Ti(C,N)-0WC was explained in part by larger grain size. Wear occurred mainly by grain dislodgment after intergranular cracking mainly caused by the accumulated stress within the grains.

• 대한기계학회논문집B
• /
• 제21권7호
• /
• pp.939-947
• /
• 1997

An experimental study of the skin friction measurement in a turbulent boundary-layer has been carried out. The skin friction measurements are made using the laser interferometer skin friction (LISF) meter, which optically detects the rate of thinning of an oil applied to the test surface. This technique produces reliable skin friction data over a wide range of flow situations up to 3-dimensional complicated flows with separation, where traditional skin friction measurement techniques are not applicable. The present measured data in a turbulent boundary-layer on a flat plate using the LISF technique shows a good comparison with the result from the previous velocity profile techniques, which proves the validity of the present technique. An extensive error analysis is carried out for the present technique yielding an uncertainty of about .+-.8%, which makes them suitable for CFD code validation purposes. Finally the measurements of the skin friction in a separated region after a surface-mounted obstacle are also presented.

• 대한조선학회논문집
• /
• 제56권6호
• /
• pp.532-540
• /
• 2019

This study describes a test method for evaluating the ice friction and abrasion performance of polar coatings. The evaluation methods of physical properties of general coatings for ocean-going vessels and polar coatings for ice-going vessels were investigated and their limitations were analyzed. We have also reviewed previous researches related to the development of polar paints and confirmed the necessity of developing test techniques. A flat steel plate was coated with several types of commercial coating, and cold model ice was used to cause ice friction and abrasion events between coated surface and ice. For evaluation of ice friction and abrasion performances, test procedures such as measurement of coating surface roughness, measurement of frictional force using model ice, implementation of ice abrasion and drying of coating surface were developed. The friction and abrasion characteristics of each coating are analyzed and summarized through the change of friction force and roughness data according to the progress of ice abrasion.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.57-58
• /
• 2002

Asperity arrays and Independent asperities were fabricated on a silicon plate. Then pull-off and friction forces were measured on each asperity pattern by using AFM (atomic force microscope) in humid air and high vacuum of $2{\times}10^{-5}$ Pa. The probe of AFM cantilever has a flat square of about $1\;{\mu}m^2$ on its tip. The results showed that the pull-off force was proportional to the curvature radius of asperity peak in each ambient condition. The friction force was proportional to the pull-off force and was slightly higher in the humid air than in the high vacuum.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.484-495
• /
• 2010

The speed-power prediction is one of the most important functions of towing-tank facilities. Generally, ITTC-1978 extrapolation method is employed for the full-scale powering prediction. During the procedure, the friction resistance line plays a major role to predict both model- and full-scale resistance. In this paper, the form factors determined by ITTC-1957 line for several kinds of vessels are compared with the values obtained using the lines proposed by Grigson(1993) and Katsui et al.(2005). Resistance and self-propulsion coefficients predicted by three different friction resistance lines are minutely analyzed. Finally, brake powers and revolutions estimated by flat plate friction resistance lines of Grigson and Katsui et al. are compared with the results obtained from ITTC-1957 line.

• 한국추진공학회지
• /
• 제10권2호
• /
• pp.87-94
• /
• 2006

모델 표면의 임의 영역에서 나타나는 이차원 전단응력의 분포를 측정하는 실험적 연구가 수행되었다. 오일막 위에 형성된 간섭영상을 이용한 이 측정법은 시험부 표면에 있는 오일막의 국소 기울기의 분포로부터 오일 윤활이론을 적용하여 전단응력의 분포를 얻어낼 수 있다. 평판 위에 수직으로 설치된 원형 실린더 전방의 박리영역에 이 측정법을 적용되어 전단응력의 이차원 분포가 측정되었다. 실험에서 관찰된 전단응력 분포는 유사한 유동조건에서 얻어진 과거 실험 및 수치결과와 비교분석 되었으며, 연구에서 전단응력 분포가 다른 연구결과들과 서로 잘 일치하고 있음이 관찰되어 이 측정법의 응용성이 검증되었다.

• Tribology and Lubricants
• /
• 제39권5호
• /
• pp.212-215
• /
• 2023

Diaphragm compressors play a crucial role in safely compressing large volumes of high-purity hydrogen gas without contamination or leakage, thereby ensuring quality and reliability. Diaphragm compressors use a thin, flat, triple-layered diaphragm plate that is subjected to repetitive piston pressure for compression. They are usually made of metallic materials such as stainless steel or Inconel owing to their high-pressure resistance. However, since they are consumable components, they fail due to fatigue from repetitive pressure and vibration stress. This study aims to evaluate the scratch characteristics of diaphragms in operational environments by conducting tests on three different samples: Inconel 718, AISI 301, and Teflon-coated AISI 301. The Inconel 718 sample underwent a polishing process, the AISI 301 sample used raw material, and the Teflon coating was applied to the AISI 301 substrate at a thickness of 50 ㎛. To assess the scratch resistance, reciprocating motion friction tests were performed using a tribometer, utilizing 220 and 2000 grit sandpapers as the counter materials. The results of the friction tests suggested that the Teflon-coated sample exhibited the lowest initial friction coefficient and consistently maintained the lowest average friction coefficient (0.13 and 0.11 with 220 and 2000 grit, respectively) throughout the test. Moreover, the Teflon-coated diaphragm showed minimal wear patterns, indicating superior scratch resistance than the Inconel 718 and AISI 301 samples. These findings suggest that Teflon coatings may offer an effective solution for enhancing scratch resistance in diaphragms, thereby improving compressor performance in high-pressure hydrogen applications.