• 에너지공학
• /
• 제18권2호
• /
• pp.108-113
• /
• 2009

균일한 열유속을 갖는 가열된 평판에 부착된 발포 알루미늄에 대한 충돌제트의 열유동 특성에 대한 실험적 연구가 수행되었다. 열전달 특성에 대한 기공도, 다공성 물질의 두께, Reynolds 수의 영향이 고찰되었다. 실험결과 가열평판에 부착된 발포 알루미늄에 의해 열전달의 증가를 얻을 수 있었고 다공성 물질의 삽입에 의한 열전달 증가는 열전달 표면적의 증가와 압력 손실에 의한 운동량 감소에 의해 영향을 받는 것을 확인하였다.

• 대한조선학회지
• /
• 제17권1호
• /
• pp.1-10
• /
• 1980

The nonlinear analysis of ship plating with flat bar stiffners has been carried out by the finite element method based on the load incremental approach. The large deflection analysis has been done by using the Lagrangian description. The elastoplastic analysis has been performed by adopting the flow theory of plasticity and the von Mises yield condition. The layered elements are used to show the process of yielding through the plate thickness in the elasto-plastic analysis. The following results are obtained; 1) According to the large deflection analysis, it is shown that the small deflection theory to the plate is applicable in the range of the lateral deflection-the thickness ratio $w/h{\leqq}0.3$ and ship plating in the range of $w/h{\leqq}0.5$. 2) By means of the elasto-plastic analysis, it is found that the maximum load-carrying capacity of the plate increases as much as 1.8 times of the initial yield load in the case of the simply supported condition and 2.2 times in the clamped condition. It is also shown that the maximum load-carrying capacity of ship plating increase as much as 4.3 times in the simply supported condition and 4.2 times in the clamped condition. This method would be applied and extended to solve combined nonlinear problems which involve both material nonlinearity and geometric nonlinearity.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 춘계학술대회논문집; 전남대학교, 19 May 1995
• /
• pp.196-201
• /
• 1995

The broadband and discrete sources of sound in small cooling fans of propeller type and centrifugal type were investigated to understand the turbulent vortex structures from many bladed fans using ANSI test plenum for small air-moving devices (AMDs). The noise measurement method uses the plenum as a test apparatus to determine the acoustic source spectral density function at each operating conditions similar to real engineering applications based on acoustic similarity laws. The characteristics of fans including the head rise vs. volumetric flow rate performance were measured using a performance test facility. The sound power spectrum is decomposed into two non-dimensional functions: an acoustic source spectral distribution function F(St,.phi.) and an acoustic system response function G(He,.phi.) where St, He, and .phi. are the Strouhal number, the Helmholtz number, and the volumetric flow rate coefficient, respectively. The autospectra of radiated noise measurements for the fan operating at several volumetric flow rates,.phi., are analyzed using acoustical similarity. The rotating stall in the small propeller fan with a bell-mouth guided is mainly due to a leading edge separation. It creates a blockage in the passage and the reduction in the flow rate. The sound power levels with respect to the rotational speeds were measured to reveal the mechanisms of stall and/or surge for different loading conditions and geometries, for example, fans installed with a impinging plate. Lee and Meecham (1993) studied the effect of the large-scale motions like impinging normally on a flat plate using Large-Eddy Simulation(LES) and Lighthill's analogy.[ASME Winter Annual Meeting 1993, 93-WA/NCA-22]. The dipole and quadrupole sources in the fans tested are shown closely related to the vortex structures involved using cross-correlations of the hot-wire and microphone signals.

• 태양에너지
• /
• 제15권3호
• /
• pp.127-140
• /
• 1995

본 연구는 2차원 충돌공기분류계에서 공기의 흐름 방향과 수직이 되게 설치한 평판 전열면 앞에 전열증진을 목적으로 난류촉진체인 정4각 로드군을 설치할때의 유동특성과 전열특성을 실험을 통해서 구명하고, 본 실험범위내에서 로드의 최적 설치조건을 제시하기 위한 실험적 연구이다. 실험은 먼저 로드를 설치하지 않은 평판에서의 전열특성을 밝힌후, 로드를 설치할 경우 로드의 피치가 40mm일때 로드와 전열면사이의 간극 및 로드폭 변화시의 유동특성과 전열 특성을 구명하여 로드를 설치하지 않은 평판과의 전열성능을 비교하였다. 본 실험범위내에서 전열면에 간극을 두고 로드를 설치하면 로드 바로 밑에서의 가속 및 로드에 의한 난류생성과 재부착에 의해 전열성능은 향상되며 로드폭을 변화시킨 경우에는 로드폭이 클수록 로드 바로 밑에서의 가속효과와 로드 직전에 와류의 영향이 크게 작용하여 전열성능이 향상된다.

• 한국유체기계학회 논문집
• /
• 제15권3호
• /
• pp.46-50
• /
• 2012

Plasma actuator makes parallel flow on the wall surface by the interaction between plasma and neutral air particles. Dielectric barrier discharge (DBD) plasma actuator is widely studied as one type of plasma actuators, which consists of one electrode exposed to the environmental gas and the other encapsulated by a dielectric material. This paper is experimentally focused on the performance of DBD plasma actuator mounted on a flat plate, which depends on kinds of the electrode materials, their thicknesses and the supplied voltage including its frequency. We measured the velocity magnitudes of the induced flow by a stagnation probe as a performance parameter of the plasma actuators. The velocity profiles of the flow induced by the plasma actuators are similar in all measurement cases. The magnitude of the induced velocity is strongly influenced by the thickness of the electrodes and the frequency of the input voltage. The performance of DBD plasma actuators is related to the electric properties of the electrode materials such as the ionization energy and the electrical resistivity.

• 대한기계학회논문집B
• /
• 제25권1호
• /
• pp.96-107
• /
• 2001

An unsteady numerical simulation was performed to analyze flow structures behind a local suction/blowing in a flat-plate turbulent boundary layer. The local forcing was given to the boundary layer flow by means of sinusoidally oscillating jet. A version of the unsteady $\kappa$-$\xi$-f(sub)u model (Rhee and Sung 2000) was employed. The Reynolds number based on the momentum thickness was about Re(sub)$\theta$=1700. The forcing frequency was varied in the range 0.011$\leq$f(sup)+$\leq$0.044 with a fixed forcing amplitude A(sub)o=0.4. The predicted results were compared and validated with the experimental data. It was shown that the unsteady locally-forced boundary layer flow is predicted well by the $\kappa$-$\xi$-f(sub)u model. The effect of the pitch angle of local forcing on the reduction of skin friction was also examined.

• 대한기계학회논문집B
• /
• 제29권2호
• /
• pp.279-286
• /
• 2005

This study presents experimental results on the heat transfer coefficients in the film boiling region of spray cooling for actual metallurgical process. In this study, the heat flux distributions of a two dimensional dilute spray impinging on a hot plate were experimentally investigated. A stainless steel block was cooled down from intial temperature of about $800^{\circ}C$ by twin fluid (air-water) flat spray. It was found from the experimental results that the heat transfer area was classified into the stagnation region and wall-flow region. In the stagnation region, the experimental data of local heat transfer coefficient was closely correlated with the local droplet-flow-rate supplied from the spray nozzle directly. Thus, the local heat transfer coefficients are in good agreement with the predicted values from the correlations proposed by our previous study. In wall-flow region, however, remarkable differences are observed between experimental data and predicted values because the number of rebound droplets increase with increasing the distance from the stagnation point.

• 태양에너지
• /
• 제7권2호
• /
• pp.37-53
• /
• 1987

This study has been prepared for the purpose of developing the system performance prediction method of natural circulation solar hot water system. The storage tank of the natural circulation solar hot water system equipped with flat-plate solar collector is located at higher elevation than the solar collectors. Therefor, the storage tank temperature distribution formed accordance with configuration of storage tank by flow rate of circulating fluid affect system collection efficiency. In this study measure the storage tank temperature distribution with various experimental system under real sun condition and present the theoretical prediction method of the storage tank temperature. Moreover measure the flow rate not only day-time but also night-time reverse flow rate with die injection visual flow meter. Main conclusion obtain from the present study is as follows; 1) The storage tank temperature distribution above the connecting pipe connection position is the same as that of the fully mixed tank and below the connection position is the same as that of stratified tank. 2) The system performance sensitive to the storage tank temperature distribution. Therefore detailed tank model is necessary. Average storage tank temperature can be calculate 3% and storage tank temperature profile can get less than 10% difference with this model system.

• 설비공학논문집
• /
• 제8권1호
• /
• pp.120-139
• /
• 1996

Experiment was performed to study the heat transfer characteristics in 27 kinds of 15 : 1 scale models of multi-louverred fin heat exchangers with a wide range of variables(R $e_{Lp}$ =100~1, 800, $L_p$/F$p$=0.3~0.9, $\theta$=20$^{\circ}$~40$^{\circ}$). Thermofoil heaters were used to heat the louver fins and the local average Nusselt number for each louver in the louver array was obtained at constant wall temperature conditions. Correlations are developed to predict the heat transfer characteristics and drag coefficients. Generally, the heat transfer characteristics in the multi-louvered fins is shown to be similar to those of the laminar heat transfer on a flat plate. As the Reynolds number, the louver pitch to fin pitch ratio$L_p$/F$p$and the louver angle($\theta$) increase respectively, the average Nusselt number increases, but the variation of average Nusselt number as a function of the louver angle is smaller than that as a function of the louver pitch to fin pitch ratio. In case of$L_p$/F$p$ <0.5, the average Nusselt number of the 3rd louver is especially lower than the others, it is expected that it is due to the flow structure such as a recirculation flow and a flow separation.

• 에너지공학
• /
• 제14권4호
• /
• pp.213-218
• /
• 2005

습공기 유동의 착상조건하에서의 열 및 물질 전달 특성을 이해하기 위해서, 미니 열풍동을 제작하고 열풍동의 시험부인 사각덕트 아랫면에 알루미늄 평판을 설치하고 평판의 중심력에 전기냉각모듈(Peltier device)을 부착하였다. 현미경(해상도 0.05mm)을 이용하여 습공기 유동 방향으로 알미늄 평판위의 7개점의 서리 두께를 측정하였으며, 전자저울(해상도 1mg)을 이용하여 각 운전시간대까지의 발생된 서리의 총괄 질량을 측정하였다. 여러 가지의 실험조건에서 서리두께와 서리질량 그리고 알미늄 평판상의 온도 분포 등을 구하고, 이로부터 습공기 유동의 습도 및 속도가 서리의 성장 특성에 미치는 영향을 분석하였다.