• Journal of the Optical Society of Korea
• /
• v.12 no.3
• /
• pp.174-177
• /
• 2008

The luminance properties of FFL(Flat Fluorescent Lamp) backlights have been investigated in detail for the first time. The on-axis luminance gain as well as viewing-angle characteristics on various combinations of optical films were obtained from FFL backlight and compared to the results of conventional CCFL(cold-cathode fluorescent lamps) backlights. It was found that the on-axis luminance gains achieved by using optical films in the FFL backlight were lower than those in the CCFL backlight indicating that the recycling processes occurring between optical films and light sources/reflection sheet are not so effective in the FFL backlight due to the much larger area of, and thus higher absorption probability of the FFL. This result suggests that new optical films should be developed for FFL backlight and other flat-lamp backlight technologies.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1725-1728
• /
• 2006

Flat fluorescent lamp(FFL) is used as a light source for LCD TV backlight and is composed of many discharge channels but each channel may not be turned on simultatneouly especially at cold temperature. The simultaneous start of each lamp channels of FFL was accomplished by driving FFL with specially designed voltage and currnet waveforms without sacrificing the inverter efficency.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.316-318
• /
• 2001

In this paper, the basic characteristics of flat fluorescent lamp using ultraviolet generated from gas discharge and powder type electrolyminescent display(P-ELD) using a phenomenon of the light emission eaused by the electrical field applied to phosphor are studied. The lamp is a simple structure with insulator layer, phosphor layer, and gas gap. Current(displacement current + discharge current) in flat fluorescent lamp using.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.2 s.43
• /
• pp.1-8
• /
• 2007

A flat fluorescent lamp (FFL) was developed as a light source for LCD TV Backlight. The channels of FFL were realized by forming the flat glass at high temperature. The performance of the backlight with FFL was shown to improve by optimizing the FFL channel profile that has elliptical shape, 4.4 mm height and 1.4 mm sealing distance. In this paper, the brightness uniformity of LCD TV backlights was investigated by optical simulation of FFL channel profiles. The brightness of LCD TV using FFL with the optimized channel profile was shown to be $576\;cd/m^2$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.520-520
• /
• 2013

Lateral 구조를 갖는 탄소나노튜브 에미터 캐소드의 금속전극 선폭과 간격은 탄소나노튜브 에미터 밀도와 게이트에 인가되는 전계의 크기에 밀접한 관계가 있어 전계방출특성에 큰 영향을 나타내므로 조속한 상업화를 위해서는 최적화 연구가 요구된다. 따라서 본 연구에서는 금속전극의 선폭과 간격을 110/30, 80/30, 40/30과 120/20, 90/20, 20/20 ${\mu}m$로 각각 변화시켜 4.6인치 탄소나노튜브 에미터 기반 flat light lamp 개발연구를 진행하였다. 이때 사용한 금속전극은 2 mm 두께를 갖는 4.6인치 소다라임 글라스 위에 패턴 된 PR에 Ag를 sputtering하여 증착 후 PR을 lift-off하여 형성하였다. 이와 같이 형성된 금속전극은 ~1 ${\mu}m$와 12 nm의 두께와 표면단차를 각각 가지고 있었다. 형성된 금속전극 위에 유전체와 탄소나노튜브 에미터를 각각의 페이스트를 사용하여 스크린 인쇄와 소성과정을 통해 형성하였다. 이때 레이저 빔을 전극사이의 빈 공간에 조사하여 탄소나노튜브 에미터를 금속전극 위에 정밀하게 정렬하였으며 잔존하는 유기물과 유기용매를 없애기 위해 대기압 공기분위기의 $410^{\circ}C$에서 10분간 소성과정을 거친 후 접착테이프를 사용하여 잔탄 속에 있는 탄소나노튜브 에미터를 물리적 힘으로 수직하게 노출시켜 캐소드를 준비하였다. 애노드는 전계에 의해 방출된 전자의 측정과 전계방출 이미지를 얻기 위해서 P22 형광체와 Al박막이 증착된 2 mm 두께의 소다라임 글라스를 사용하였다. 캐소드와 애노드 사이의 간격은 6~10 mm로 유지하였고, 진공챔버의 기본 압력을 $5{\times}10^{-6}$ Torr 이하로 유지하였다. 캐소드와 게이트 전극에 1, 4 kHz와 3% duty를 갖는 bipolar 형태의 DC 사각펄스파를, 애노드에 ~18 kV의 DC 고전압을 각각 인가하여 평가하였으며 추후, 이렇게 제작된 다양한 선폭과 간격을 갖는 탄소나노튜브 에미터 기반 flat light lamp의 전계방출특성과 효율에 대한 비교 연구를 진행할 계획이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.725-729
• /
• 2003

In this paper, a mercury-free flat discharge lamp with opposite electrode structure, a couple of phosphor layer and discharge vessel has been studied for LCD back-lighting. When the drive voltage conditions were set properly, a uniform discharge generates over entires emitting surface. The firing voltage was increased with increasing the discharge gas pressure. It was considered that this tendency was resulted from the decrease of mean free paths due to the increase of discharge gas pressure. The maximum luminance of 2700[cd/m2] was obtained in the green emitting FFL.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1522-1525
• /
• 2007

In this study, flat fluorescent lamps (FFLs) having surface discharge structures was fabricated by screen printing technique and were studied using spectraradiometer and square pulse power supply. Two types of FFLs having different shapes of electrodes (crosstype and line-type structure) were compared with variation of discharge shape and mixed gas ratio.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.687-690
• /
• 2009

It has been recently reported that nano-sized MgO single crystal powders emit ultraviolet by stimulation of electrons under vacuum condition. Therefore, in this study, nano-crystalline MgO powders were applied to a xenon plasma flat fluorescent lamp for LCD backlight to improve emission efficiency of the lamp by help of extra ultraviolet from nano-MgO. For comparison with nano-crystalline MgO powders, MgO nano-thin film was applied directly on phosphors inside a lamp panel through e-beam evaporation The luminance and efficiency of FFL with an addition of MgO nano-crystal powders on phosphors were improved by around 20%. Application of MgO thin film to phosphors worsened the emission characteristics of FFLs, even rather than FFL without MgO. The reason came from insufficient stimulation of phosphors by UV, crystallinity of MgO, and low secondary electron coefficient.

• Information Display
• /
• v.5 no.5
• /
• pp.13-18
• /
• 2004

액정 디스플레이(LCD)의 대형화 및 저가격화와 더불어 전체 소비전력의 90% 이상, 모듈(module) 원가의 50% 이상을 차지하는 백라이트에 대한 연구가 활발히 진행되고 있다. 이에 기존의 냉음극 형광램프(CCFL)뿐만 아니라 원가 절감 및 특성 향상 기술로서 외부전극 형광램프(External Electrode Fluorescent Lamp), 면광원(Flat Fluorescent Lamp), 발광 다이오드 (Light Emitting Diode), 전계 방출램프(Field Emission Lamp) 등에 대한 개발이 활발히 진행되고 있는 바 이와 같은 다양한 기술의 경쟁을 통하여 보다 고품질 및 저원가 백라이트의 개발이 가능하여 액정 디스플레이의 경쟁력을 확대시킬 것으로 예상된다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.153-157
• /
• 2009

A Highly efficient Mercury-free Flat Fluorescent Lamp (MFFL) with dielectric barrier Xe gas discharge was developed for an alternative of conventional line-type Cold Cathode Fluorescent Lamps (CCFLs) which shows a wide voltage margin and a stable discharge operation for diffuse glow discharge with an application of a auxiliary electrode. Electro-optic characteristics of the MFFL were examined through the changes in ambient temperature, total pressure and Xe partial pressure. the single cell is expanded into a multi-structured configuration to realize a large sized lamp by a simple repetition of the single cells, and a new driving scheme is proposed for an adaptive brightness control using dual auxiliary electrodes and bi-polar drive scheme. In addition, interesting application of this ultra high luminance flat lamp by the optimization of the gas condition and the pattern of the rear phosphor layer is suggested as a good alternative of daylight lamp source