• Journal of KIISE:Databases
• /
• v.35 no.6
• /
• pp.518-532
• /
• 2008

Broadcast scheme has been widely researched for efficient data delivery in the mobile environment because the downlink capacity of a mobile client is much greater than the uplink capacity, and the power of a mobile client is limited. In the proposed scheme, the index lets the client know when data items would be broadcasted and enables the client to minimize the tuning time and power consumption. Single channel index schemes are fit to flat broadcast that performs well when all the broadcasted data items are accessed with the same probability whereas the multi-disk broadcast scheme is proper when the data access distribution is skewed. The existing index schemes, however, cannot work on the Multi-disk broadcast scheme because they cannot point the replicating data items in a broadcast cycle. This paper proposes a Multi-disk Exponential Index (MDEI) which is a single channel index scheme fit to Multi-disk broadcast scheme. Because MDEI scheme organizes a separate index for each disk, it functions with multi-disk broadcast, resulting in a greater reduction of average access latency than that of other flat-broadcast index schemes when the data access distribution is skewed. The performance evaluation showed that MDEI has a good performance when data access distribution is skewed. MDEI has short average access latency and not much average tuning time when the data access distribution is skewed.

• Korean Journal of Human Ecology
• /
• v.18 no.5
• /
• pp.1093-1101
• /
• 2009

To provide basic data to manufacture superior brassieres, we performed a survey on the wearing and buying habits, and preference of functions and materials of brassieres for 189 women subjects in their twenties. The results of this research are as follows; Style and size are the most important in purchasing brassieres. Flat breasted and sagging breasted subjects were dissatisfied in the fit of the upper cup. 70% of the subjects were ignorant of their brassiere size. Sagging breasted subjects were less satisfied with smoothness, softness, and weight when wearing their bras in comparison with the other types. Conical type breasts were common amongst women in their 20s. They are more likely to wear size 75A and 80A where the full bust girth is 10cm larger than the under-bust. They preferred demi cup brassieres with thin or moderate padding to full cup brassieres with thick padding. On the other hand, 56.8% of subjects wore brassieres all day. The subjects were dissatisfied with the slipping down of the shoulder straps. Large-breasted subjects were concerned more with dampness and the fit on the center front of the brassiere, and brassieres with too thick padding had a poor fit on the center front. Sports-brassieres which fit close to the skin and used stretchable fabric caused more itching and dampness and dissatisfaction in removal of the brassiere.

• The Research Journal of the Costume Culture
• /
• v.21 no.5
• /
• pp.708-725
• /
• 2013

In the 2010s, skinny jeans were trendy, and they became a must-have for young women. The styles, clothing pressure and buying behavior of skinny jeans have been studied, but the patternmaking of skinny jeans has not been researched yet. To analyze skinny jeans patterns, we grouped skinny jeans into nine brands. They were sorted into three groups: special jeans brand, trendy jeans brand, and SPA brand. This study compared skinny jeans' sizing systems, product dimensions and pattern measurements in three brand groups. The appearance and fit of skinny jeans were evaluated by random groups of people in their 20s and 30s. The sizing systems for skinny jeans were different with KS K0051, and they were shown waist girth in inches. The waist and hip circumferences were different among brand groups. In product dimensions, trendy jeans brands had a shorter crotch length, a lower crotch depth, a narrower back crotch width, and a longer inseam than the others. The measurements of skinny jeans flat patterns were significantly different in as below; front crotch depth, front crotch height, front crotch length, back crotch extension, gap between back and front crotch depth, back crotch height, back crotch length, and center back angle. In the sensory survey results, trendy jeans brands were evaluated well in the fit of the waist line, hip line, crotch line, midthigh line, outseam, inseam, side waist line, crotch length and overall fit.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.8
• /
• pp.791-801
• /
• 2012

We performed an assessment of wearing, purchasing, satisfaction, and the fit of brassieres according to body and breast type for college women to provide basic data on the manufacture of an ergonomic brassiere. The classifications of domed and conical breast type or projecting and conical breast type were unclear. Flat breast were dissatisfied with the shape of small and flat, and drooping breast were dissatisfied with the shape of big, projected, and drooping. In purchasing a brassiere, the majority of subjects were ignorant of their brassiere size, and over 80% of the subjects bought a brassiere without trying it on. Over 50% of those surveyed said they found it difficult to buy a well-fitted brassiere, particularly for the flat and drooping breast type. Over 70% of those surveyed wore a brassiere of 3/4 cup size, the slim body type wore a brassiere of 1/2 cup size; however, the obese body type wore a brassiere of full-cup size. The flat-breast or slim-body wore a brassiere of a thick pad type but projecting-breast or drooping breast wore brassiere of a thin pad type. Many of the subjects wore an unfitted brassiere in cup size and under bust size. In the classification of breast type, there were slight differences between the breast type that they recognized and the breast type that they were shown. There were distinctions in function, satisfaction, and fitness based on breast type. Therefore, the development of an ergonomic brassiere should considered the characteristics of breast type for fitness and comfort.

• The International Journal of Costume Culture
• /
• v.2 no.2
• /
• pp.80-96
• /
• 1999

This research focused on pattern adjustments of the stable knit garment for women. Fourteen different types of the knitted fabrics by 12 gauge, computerized flat bed machines were cut in as one half of the torso front, one half of the torso back, and one side of the sleeves for each of them. Guidelines such as the center front, the center back, the armhole, the bust-line, the waistline, the hip-line the hemline were basted on the torso patterns in the knitted fabrics. Also the grain-line, the elbow-line, and the hemline were basted on the one side of the sleeves in the same as above knitted fabrics. The torso patterns in the knitted fabrics were exhibited on the dress-forms on top of the torso patterns in Muslin, which also have the same guidelines drawn on. The distances between the guidelines on Muslin and those on the knitted fabrics for each set of the sample fabrics were measured every three days for two weeks. The fabric properties of the fourteen knitted fabrics such as fiber contents, stitch density both in the wale and course directions, weight, thickness, stretch & recovery, residual shrinkage, relaxation and drapability were laboratory tested for how these were related to finished appearance of 12 gauge, computerized flat knit garments and also in order to prove the fourteen knitted fabrics fall to a category of such as the stable knit. The results from the investigation revealed that six fabric properties such as stitch density, thickness, stretch recovery, residual shrinkage and relaxation were not so much significant factors as weight and drapability. In conclusion, fabric weight, and drapability of the fabric resulting from fiber contents were the cause of final appearance distortion of garment. When adapting patterns for stabilized, 12 gauge, computerized flat knitted fabrics, the fiber contents of the fabrics should be taken into consideration to reduce the production cost and produce better-fit garments.

• Membrane and Water Treatment
• /
• v.12 no.1
• /
• pp.23-35
• /
• 2021

A POM-membrane was fabricated by immobilizing a keggin type polyoxometalate (POM) H5PV2Mo10O40 onto the surface of microporous flat-sheet polymeric polyvinylidene fluoride (PVFD) membrane using a chemical deposition method. The POM-membrane was characterized by FT-IR, SEM and EDX to confirm existing of the POM onto the membrane surface. The POM-membrane was used to remove an anionic textile dye (Reactive Black 5 named as an RB5) from aqueous phases with a cross-flow membrane filtration and a batch adsorption system. The dye removal efficiency of the POM-membrane using the cross-flow membrane filtration system and the batch adsorption system was about 88% and 98%, respectively. The influence factors such as contact time, adsorbent dosage, pH, and initial dye concentration were investigated to understand the adsorption mechanism of the RB5 dye onto the POM-membrane. To find the best fitting isotherm model, Langmuir, Freundlich, BET and Harkins-Jura isotherm models were used to analyze the experimental data. The isotherm analysis showed that the Langmuir isotherm model was found to the best fit for the adsorption data (R2 = 0.9982, qmax = 24.87 mg/g). Also, adsorption kinetic models showed the pseudo second order kinetic model was found the best model to fit the experimental data (R2 = 0.9989, q = 8.29 mg/g, C0 = 15 ppm). Moreover, after four times regeneration with HNO3 acid, the POM-membrane showed high regenerability without losing dye adsorption capacity.

• Journal of the Korean Society of Costume
• /
• v.55 no.6 s.96
• /
• pp.109-124
• /
• 2005

The object of this study was to identify the production technique and immediate constituent of lingerie by examining the materials and the sewing techniques. Various papers are referenced for theoretical study and the elements and techniques of lingerie are analyzed based on photographical materials. From the late 20C century to the present time was the research time period. This paper concludes as follows: 1 Decorative method: Lace, Ribbons, piping, elastic bands were some of the decorative materials attached to the garments by zigzag stitch. 2. Flat pattern making: Lingerie patterns were drafted in smaller size than the patterns of outer garments. Bias cut would be applied for the noll-stretchable fabrics. 3. Draping: Bias grain would be applied for the non-stretch fabric. When draping stretch fabrics, follow the grain line of the fabrics and pull the fabric so that it could fit onto the body. 4. Production technique: Straight stitch would be applied for non-stretch fabrics. Zigzag stitch would be applied for stretch fabrics.

• Journal of Welding and Joining
• /
• v.33 no.1
• /
• pp.54-60
• /
• 2015

Laser-arc hybrid welding has been considered as an effective pipe girth welding process since early 2000's. Tolerance for fit-up offsets such as gap and edge misalignment is one of most important requirements in pipe girth laser-arc hybrid welding, and several approaches using parameter optimization, a laser beam scanning and an arc oscillation have been tried. However the required offset tolerance has not been fully accomplished up to now and laser-arc hybrid welding has not been widely applied in pipeline construction than expected, despite of its high welding speed and deep penetration. In this study, internal welding was adopted to ensure the offset tolerance and sound back bead. The effect of welding parameters on bead shape was investigated at the flat position. Also tolerances for gap and edge misalignment were verified as 0.5 mm and 2.0 mm, respectively. The position welding trials were conducted at several welding positions from the flat to the overhead position in a downward direction. With the fixed welding speed, arc current for gas metal arc welding current and laser output power, adequate welding voltages for gas metal arc welding were suggested for each position.

• Journal of Fisheries and Marine Sciences Education
• /
• v.5 no.2
• /
• pp.90-97
• /
• 1993

Pair trawling is one of the important fishing methods for Korean fisheries, and is working in the western sea of Korea - the Yellow Sea and the East China Sea. On the engine power of the trawlers, 72% of 190 pairs of trawlers were equipped with 450ps class engine, and 21% with 450~750ps and merely 7% with in 750ps class 1980. Thereafter the engine power has grown up, so that 450~750ps occupy 28% and 750ps or more 27% in 1992. Main objective fishes of pair trawling were traditionally flat fishes, so the fundamental shape of pair trawl net was a four - seam net, but by the gradual shortage of flat fishes, roundfishes has been noticed. So the six - seam net which performs high opening of net mouth has been used widely since 1985. In the six - seam net, the length of wing was not so short in the beginning but became short in the later instead of the net pendant elongated, and also the pendant was separated into three pieces according to the change of wing structure. Since the 1990's, the objective fishes has gradually been changed into pelagic fishes, the fishing technique is required to fit the behavior of fishes. So the midwater trawling or the multi -layer trawling became required.

• Korean Journal of Human Ecology
• /
• v.15 no.3
• /
• pp.481-490
• /
• 2006

Adjusting pressure level in the construction of athletes' tight-fitting garments by reducing the elastic knit pattern is a challenging subject, which influences the performance of the wearer directly. Therefore, in this study, relationship between the reduction rates of the basic pattern obtained from 3D human scan data and resultant clothing pressure was explored to improve the fit and pressure exerted by clothing. 3D scan data were obtained using Cyberware and they were transformed into a flat pattern using software based on Runge-Kutta method. Reduction rate was examined by subjective wear test as well as objective pressure measurement. As a result, difference in the length between the original 3D body scan data and the 2D tight-fitting pattern was 0.02$\sim$0.50cm (0.05$\sim$1.06%), which was within the range of tolerable limits in making clothes. Among the five garments, the 3T-pattern was superior in terms of subjective sensation and fit. The pressure of the 3T pattern was 2$\sim$4 gf/cm2 at five locations on the body, which is almost the same or a bit higher than that of Z-pattern. In the case of tight-fitting overall garment, the reduction rate of the pattern in the wale direction is more critical to the subjective sensation than the course direction. It is recommended that the reduction grading rules of course direction should be larger than that of Ziegert for a better fit of tight-fitting garments. In the case of wale direction, however, reduction grading rule should be kept the same as suggested earlier by Ziegert (1988).