• 천문학회보
• /
• 제35권2호
• /
• pp.41.1-41.1
• /
• 2010

It has been suggested that merging plays an important role in the formation and the evolution of early-type galaxies. Optical-NIR color gradients of early-type galaxies in high density environments are found to be less steep than those in low density environment, hinting frequent merger activities in early-type galaxies in high density environment. In order to confirm if the flat color gradient is the result of dry merger, we decided to look deeply to find merging features and get their relation with color gradient. We selected samples which show extreme values of optical-NIR color gradients based on the data of previous study, and observed them at Maidanak observatory 1.5m telescope with long exposure. After masking out overlaid sources, our analysis reveals that these galaxies do not have extreme color gradient values. High degree sky flat technique was used during observation to aid discovery of faint, extended features. However, flatness of detector (SNUCAM) was good enough, so we could not see any marked improvement in image quality compared to those using normal sky flats. Additionally we noticed a feature that looks like merging tidal tail in the CFHT archival image, but this does not show up on the image we obtained. This demonstrates that flatness and correct sky estimation is very important when we look for faint merging features. In future we plan to enlarge the number of the sample.

• 수산해양교육연구
• /
• 제29권3호
• /
• pp.627-635
• /
• 2017

Sea level rise caused by climate change has become a global issue. Sea level rise seems to be an important factor of the research for coastal areas as it affects topography and vegetation of coasts and especially for the plan of coastal wetlands restoration which needs to be carried out for a long term, it has to be considered sufficiently. The coastal wetlands in Korea was damaged by the land reclamation project but recent concerns on the restoration have increased as its value is evaluated highly. Suncheon Bay had also reclaimed from wetlands to rice field once however this site is very active for restoration nowadays. This study estimated an effect according to sea level rise by 2100, reappearing the none dike condition of Suncheon Bay so that it can be taken account of a future plan of wetland restoration. The Sea Level Affecting Marshes Model(SLAMM) was selected as predicting model. The input data such as DEM(Digital Elevation Model), slope, wetlands category, sea level rise senario, tidal range and accretion rate was applied for the simulation. The results showed a decrease in tidal flat, an increase in sea area and a change of the rice field to transitional salt marsh consistently by 2100. These results of this study could be used as baseline data in the future plan of ecological restoration in Suncheon Bay.

• 한국실내디자인학회논문집
• /
• 제20권6호
• /
• pp.19-26
• /
• 2011

The purpose of this study was to small house plans according to the preferred type of emotional design. The human emotions was a major factor for small houses plan's needs. In this study is direction of the basic plan for the small houses of the spatial planning and services and the needs of community facilities. Preferred types of emotional design was identify the propensity of consume, adjectives, colors and forms. For this study, survey methods were used for data collection. The effective numbers of survey questionnaire was 183, and the survey analysis has been made by using of SPSS win 18.0. The major findings were as followings: 1) Preferred types of emotional design were "Eco-Classic oriented group", "Unspecified commonness group", "Creative design oriented group" classified. 2) "Eco-Classic oriented group" wanted Eco-system and the community space. "Unspecified commonness group" wanted Simple and universal style. "Creative design oriented group" wanted flexible styles and various items. Therefore, depending on need group is the main target-specific as well as flat planning and interior style facilities and the provision of services to be competitive in the small house could indicate. These results can provide improvement guidelines for the small house plans.

• 한국BIM학회 논문집
• /
• 제3권3호
• /
• pp.1-8
• /
• 2013

In general, a two-dimensional platform were used to manage the structural inspection information. But we performed a study on utilizing 3D model to input and display the information of structure inspection. Coarse and Fine model of structure were used to input the information. 3D model combined with database built from record plan and field inspections data and rating will provide more intuitive and effective environment for inspectors in bridge maintenance.

• 천문학회보
• /
• 제42권1호
• /
• pp.58.1-58.1
• /
• 2017

National Youth Space Center has recently founded the Deokheung Optical Astronomy Observatory (DOAO) 1m Telescope, which accepts community observing applications since 2016. Standardization and calibration of the new observing facility are essential for astronomical research. In this poster, we present standardization processes and preliminary results for photometry of the Johnson-Cousins BVRI filter system. We selected sample data from a night in stable weather condition. After bias, dark, and flat corrections and photometry using ccdred and daophot package of IRAF, we derived standardized band pass parameters including color terms. The corrected photometry results of the BVRI filter system show reduced deviations from the standard magnitudes in the literature. In addition, we calculated atmospheric extinction coefficients and limiting magnitudes of the telescope system. We plan to extend these standardizing processes to flux calibration of narrow band filters, e.g. $H{\alpha}$ filter.

• 대한건축학회논문집:계획계
• /
• 제33권12호
• /
• pp.105-112
• /
• 2017

Through various media, damage of both smoking and second-hand smoking has been recognized, and brought global scale of interest in antismoking. In Korea, government has tightened regulations of smoking in non-smoking zone since December, 1980, and after National Health Promotion Act in 1995, non-smoking zone has been gradually expanded. On the other hand, there were law suits to find those regulation towards smokers are either unconstitutional or not for 4 times. In this current state, people need smoking area to prevent second-hand smoking and to consider smokers in multi-unit dwelling. Main purpose of this research is to plan smoking spaces based on various typology of multi-dwelling plan for protection of both smokers and non-smokers' right. The research group collected and analyzed the smoking behaviors in various multi-unit dwelling types such as flat type, tower type, hybrid type and others. Based on those data, the group found three phenomena. First, there are internal regulations in multi-unit dwelling to make non-smoking zone based on National Health Promotion Act and resident representative meeting decision. Second, main smoking activities are occurring at major traffic line and entrances. Third, smoking inside of multi-unit dwelling complex causes second-hand smoking to residents live in $1^{st}$ floor and when they enter. Therefore, one can achieve both smokers' and non-smokers' protection of right by creating a designated smoking space near main entrances of multi-unit dwelling complex to consider smokers' and prevents second-hand smoking by using shaft space, which is in core space, to ventilate tobacco smoke through roof.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.227-228
• /
• 2012

In contemporary architectural practice, flat sections and plan drawings are no longer a primary means of representation and communication with participants. A typical building design has an ornamental exterior wall system and a roof system that should have water-proof quality and drainage function. By comparison, distinction between exterior wall and roof are unclear in freeform buildings, and they are integrated into a concept of a building envelope. This study is to propose 3D coordinate control technology for freeform structure by CNC curved tube method in order to develop a BIM-based envelope design and construction method for freeform building. Because a much wider freeform building construction can be achieved with correct 3D data and easy-to-implement in construction field, the proposed 3D coordinate control technology is highly recommended for practical use instead of the conventional CAD system.

• 환경영향평가
• /
• 제21권4호
• /
• pp.567-572
• /
• 2012

This paper suggests the set-up plan of the assessment scope in road noise considering road characteristics with the prediction model of road noise. The RLS90 prediction model with some assumptions is used to establish the assessment scope of road noise. The main contents of the applied assumptions are smooth drive of cars, flat region, location of all noise sources in one lane, drive in design speed, and set-up of assessment scope according to traffic volume and car speed. The information of traffic volume to predict road noise is obtained by the distribution of small cars and full-sized cars in road. In this study, the total traffic volume in road is computed by adding the number of small cars to the conversion number of small cars, which means the number of small cars making the same noise as one full-sized car. The prediction result of road noise with the influence factor of traffic volume, car speed, distance between road and receiver is presented. The resultant assessment scope of road noise is obtained by combining road noise prediction data with the set-up standard of road noise assessment scope.

• 천문학회보
• /
• 제38권1호
• /
• pp.74-74
• /
• 2013

Multi-purpose Infra-Red Imaging System (MIRIS) is the main payload of the Science and Technology Satellite-3 (STSAT-3) to be launched in the late half of this year. For the Space Observation Camera (SOC) of MIRIS, we developed the data reduction pipeline with Python powered by Astropy, a community Python library for astronomy. The pipeline features the following functionalities: i) to retrieve the raw observation data from database and convert it to a FITS format, ii) to mask bad pixels, iii) to correct the non-linearity, iv) to differentiate the frames, v) to correct the flat-field, vi) to correct focal-plane distortion, vii) to improve the world coordinate system (WCS) information using known point-source catalog, and viii) to combine the sequentially taken frames. The pipeline is well modularized and has flexibility for later update. In this poster, we introduce the details of the pipeline's features and the future maintenance plan.

• 한국위성정보통신학회논문지
• /
• 제10권3호
• /
• pp.94-101
• /
• 2015

디스플레이는 장치는 아날로그 또는 디지털 시스템에서 발생되는 문자, 도형, 영상, 패턴 형태의 정보를 인간의 육안으로 판별 가능하도록 전달함으로써 인간과 기계를 연결시켜주는 중요한 영상정보통신시스템 장치이다. 이러한 장치를 활용해 보여주는 기능이 중시되면서 정보를 정확하고 신속하게 표출하기 위한 핵심적인 기능과 역할이 절대적으로 필요하다. 아날로그 시대의 대명사였던 브라운관(CRT)에 PPI Scope 주사방식 시스템 신호를 CRT에 표시함으로써, CRT에 표시된 정보를 통해 기계적인 시스템에서 발생된 신호를 인간인 판독할 수 있도록 전달하는 중간 매개체 역할을 통해 정보를 분석하였다. 본 연구는 이와 같이 수신된 신호를 정보로 표출하는 레이더 디스플레이 장치에 관한 것으로, 디스플레이 장치의 수직 블랭킹 간격(Vertical blanking interval)과 버퍼스왑(Buffer swap)을 통한, 고정함수 그래픽 파이프라인 고속 대용량 처리형태의 알고리즘을 적용하였다. 발생될 수 있는 오차를 제거하기 위해 FPGA 및 내부 알고리즘, H/W로직을 동기화 처리로 표출정보 끊김 현상을 제거하고, 고속으로 영상정보가 표출될 수 있도록 구현함으로써, 별도의 고가 고성능 그래픽 연산장치 GPU 없이 구현된 FPGA 로직에 수행알고리즘을 적용하여 경제성은 물론 레이더 정보표출 신뢰성과 성능을 향상시켰다. 이를 통해 기존 아날로그 신호에 따라 동작하는 CRT 레이더 디스플레이를 구비한 레이더 시스템에서 디스플레이를 평면 디스플레이로 교체할 수 있도록 한 레이더 디스플레이 장치에 관한 연구이다.