• 제목/요약/키워드: Flat Sum System

검색결과 7건 처리시간 0.02초

지상파방송과 케이블방송 간에 지상파채널 재송신 대가 산정방안 (A Method for Estimating Retransmission Fee for Terrestrial Broadcasting Channels between Terrestrial Television Systems and Cable TV System Operators)

  • 문명석;이송희;최성진
    • 방송공학회논문지
    • /
    • 제21권5호
    • /
    • pp.689-703
    • /
    • 2016
  • 지상파방송사와 케이블SO 간에 지상파채널 재송신 대가 분쟁이 2007년부터 현재까지 진행 중이고, 특단의 방법이 없는 한 미래에도 계속될 전망이다. 따라서 본 논문에서는 지상파채널 재송신 대가 산정을 위해 두 가지 방법을 제시하였다. 첫째는 수익배분방법으로 지상파와 케이블이 각자 기여하는 정도에 대해 정산을 통해 대가를 산정하고, 둘째는 지상파채널에 대한 대가를 케이블PP의 프로그램사용료 기준으로 산정하는 방법이다. 또한 수익배분방식과 프로그램사용료 방법을 기준으로 정액제와 정률제의 두 가지 방식을 적용하여 재송신 대가를 제시하였다.

평판형 태양열 집열기의 각도에 따른 집열성능 연구 (Study on the Heat Collecting Performance of Flat-Plate Solar Collector by the angle)

  • 지명국;공태우;배철환;정효민;정한식
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집B
    • /
    • pp.316-321
    • /
    • 2000
  • In this study, heat collecting performance was study of flat plate solar collector by the angle. A method of study on were made turn out artificial sun by the angle of 0, 15, 30 degrees. The heat performances were measured the tube array surface temperature by thermo-couple. The winter season natural condition for 4 times on the angles of various general and emboss glass at optimum distance(0.68m) calculated of between sun and solar collector. To sum up temperature rise is appear more or less that emboss glass is all the better for general glass. The temperature variable at below of 30 degree was appear very less. The maximum performance of this system at that it is tilt angle of 30 with general glass is appear Q:11.54(kcal/min) and ${\Delta}T=18.9^{\circ}C$.

  • PDF

The Economic Feasibility of Building-Integrated Photovoltaics System Installed on the Roof of Residential Building - Focused on Comparison with Construction Cost of BAPV System Depend on Roof Finishing Materials

  • Oh, Byung-Chil
    • KIEAE Journal
    • /
    • 제17권1호
    • /
    • pp.15-21
    • /
    • 2017
  • Purpose: This study was on the economic feasibility of BIPV system, focused on comparison with construction cost of BAPV system depend on roof finishing materials, and to suggest basic data on the construction cost. Method: Construction cost of BAPV system was calculated, by selecting asphalt single, flat type roof tile, color steel plate, titanium zinc plate as roof finishing material of residential building and by sum up each cost for roof finishing construction and cost for 3kWp-volumed PV module installation. Also, the economic feasibility was analysed quantitatively by comparing the cost for BIPV system construction, installing same volumed PV module instead of roof finishing materials. Result: 1. By installing BIPV system instead of the roof finishing material, the cost of construction falls ; about 19% in case of the titanium zinc plate, which is the most expensive, and about 11% in case of the color steel plate. 2. Reducing amount of the construction cost gets larger because of installing BIPV module instead of the roof finishing material, as the construction cost for roof finishing material gets higher ; therefore, it is more economical than BAPV system in terms of whole cost of construction.

A Formula Derivation of Channel Capacity Calculation in a MIMO System

  • Kabir, S.M.Humayun;Lee, Eun-Ju;Yoon, Gi-Wan
    • Journal of information and communication convergence engineering
    • /
    • 제7권2호
    • /
    • pp.182-184
    • /
    • 2009
  • In this letter, we derive a tight closed-form formula for an ergodic capacity of a multiple-input multiple-output (MIMO) for the application of wireless communications. The derived expression is a simple closed-form formula to determine the ergodic capacity of MIMO systems. Assuming the channels are independent and identically distributed (i.i.d.) Rayleigh flat-fading between antenna pairs, the ergodic capacity can be expressed in a closed form as the finite sum of exponential integrals.

연X-선 투사 리소그라피를 위한 등배율 포물면 2-반사경 Holosymmetric System (Paraboloidal 2-mirror Holosymmetric System with Unit Maginification for Soft X-ray Projection Lithography)

  • 조영민;이상수
    • 한국광학회지
    • /
    • 제6권3호
    • /
    • pp.188-200
    • /
    • 1995
  • 파장 13nm의 연 X-선을 사용하여 초고밀도 반도체 칩을 네작할 수 있는 고분해능의 투사 결상용 2-반사경계(배율=1)을 설계하였다. 등배율(1:1)의 광학계는 holosymmetric system으로 구성하였을 때 코마와 왜곡수차가 완전히 제거되는 이점을 갖는다. 2-반사경 holosymmetric system에서 추가적으로 구면수차를 제거하기 위해 두 반사경을 동일한 포물면으로 만들고 두 반사경 사이 거리를 조절하여 비점수차와 Petzval 합이 상쇄되게 함으로써 상면만곡 수차를 보정하였다. 이렇게 구한 aplanat flat-field 포물면 2-반사경 holosymmetric system은 크기가 작고 광축회전대칭의 간단한 구조를 가지면 중앙부 차폐가 아주 작다는 특징을 갖고 있다. 이 반사경계에 대해 잔류 수차, spot diagrams, 회절효과가 고려된 NTF의 분석 등을 통해 연 X-선 리소그라피용 투사 광학계로서의 성능이 조사된 결과, $0.25\mum$및. $0.18\mum$의 해상도가 얻어지는 상의 최대 크기가 각각 4.0mm, 2.5mm로 구해졌고 초점심도는 각각 $2.5.\mu$m, $2.4.\mum$로 얻어졌다. 그러므로 이 반사경계는 256Mega DRAM 및 1Giga DRAM의 반도체 칩 제작의 연구에 응용될 수 있다.

  • PDF

신발의 굴림 특성이 족저반력 및 회내운동에 미치는 영향 (The Effects of Shoes with Rolling Feature on the Foot Reaction Force and Pronation)

  • 신학수
    • 한국운동역학회지
    • /
    • 제17권3호
    • /
    • pp.189-195
    • /
    • 2007
  • The purpose of this study was to analyze the effects of shoes with curved out-sole on the pressure, reaction force(sum of pressure) on foot and relations between the rolling speeds and pronation of foot. The foot pressure, reaction force and pressure center on the foot surface of shoe were measured with NOVEL padar system, and 3 type shoes were used to compare the position and speed of pressure center and the foot reaction force, which were s(target) shoe with soft cushions in middle part of out-sole and curved out-sole, m shoes with two type- soft, hard, hardness out-sole and curved out-sole and n shoes with flat out-sole. The subjects were 13 female university students, had weared the 3 type shoes for 6 weeks on two-weeks shifts for adaptation before experiment and put on 3-type shoes repeatedly and randomly and walked on treadmill with 3.5km/h and 80 steps/min. The data were captured with 30Hz and readjusted with 5kgf threshold reaction force. The results can be summarized as follow. 1. There were no difference in maximum reaction force on initial contact period and total foot impact, but statistical difference in maximum reaction force on takeoff period : s, m, n in ascending order. 2. There were some difference in rolling speeds for support periods. At initial contact, the rolling speed of s shoes was fastest but at periods between first and second maximum reaction force, that of m shoes fastest. 3. There was a negative relation between rolling speeds and the length of lever arm on initial reaction force related to pronation. It seems shoes with various curved shapes and hardness could make effects on the rolling features and the rolling speed also have some relationships with walking efficiency, absortion of impact and pronation.

방향성매매를 위한 지능형 매매시스템의 투자성과분석 (Analysis of Trading Performance on Intelligent Trading System for Directional Trading)

  • 최흥식;김선웅;박성철
    • 지능정보연구
    • /
    • 제17권3호
    • /
    • pp.187-201
    • /
    • 2011
  • 방향성(Direction)과 변동성(Volatility)에 대한 분석은 증권투자를 위한 시장분석의 기초가 된다. 변동성분석이 옵션 투자에서 중요하다면 주식이나 주가지수선물투자는 방향성분석에 의하여 투자성과가 결정된다. 기존의 금융분석에서 기계학습을 이용한 방향성에 대한 연구는 주가나 투자위험의 예측을 중심으로 이루어졌으며, 최근에 와서야 실전투자를 위한 매매시스템(trading system) 개발에 대한 연구가 이루어지고 있다. 인공지능형 주가예측모형에서는 ANN(artificial neural networks), fuzzy system, SVM(Support Vector Machine) 등의 기법이 주로 활용되고 있다. 본 연구에서는 방향성매매를 위한 지능형 기계학습방법 중에서도 패턴인식에서 좋은 성과를 보이고 있는 은닉마코프 모형(Hidden Markov Model)을 이용한다. 실무적으로는 방향성 예측을 위해 주로 주가의 추세분석(Trend Analysis)을 활용한다. 다양한 기술적 지표를 이용한 추세분석에 기반한 시스템트레이딩(System Trading) 기법은 실전투자에서 점차 확대추세에 있다. 본 연구에서는 시스템트레이딩 기법 중 실무에서 많이 이용되는 이동평균교차전략(moving average cross)에 연속 은닉마코프모형을 적용한 지능형 매매시스템을 제안하고, 실제 주가자료를 이용한 시뮬레이션 결과를 제시한다. 세계적 선물시장으로 성장한 KOSPI200 선물시장에서 제안된 매매시스템의 장기간의 투자성과를 분석하기 위하여 지난 21년 동안의 KOSPI200 주가지수자료를 실증 분석하였다. 분석결과는 KOSPI200 주가지수선물의 방향성매매에서 제안된 CHMM기반 지능형 매매시스템이 실전에서 일반적으로 활용되는 시스템트레이딩 기법의 투자성과를 개선할 수 있음을 보여주었다.