• KCID journal
• /
• v.17 no.2
• /
• pp.49-56
• /
• 2010

This study was carried out to survey for morphological change of lower tidal flat near Byunsan-Gosapo beach using single-beam echosounder and sound velocity profiler. Since October 2009 in the center of the region, the erosion occurred about 10~50cm, while either side of the study area is little change. Erosion occurred at the beach, each beach area in the southwest area rather than further accumulation occurred sandbank formed. Observed in the study area near the center of the erosion is the result of ongoing changes that were temporarily due to seasonal changes is not clear. However, the northwestward waves were expected to be a major source of erosion. Because of this, continue to observe the terrain and the local ocean circulation studies will be required.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.141-143
• /
• 1994

In this paper, an electrostatic micro-actuator is fabricated using flat p+ diaphragm. To avoid the buckling of the flat p+ diaphragm, the processes are designed appropriately. The fabrication processes of the actuator are the anisotropic etching with EPW, the boron diffusion process, Al deposition and the silicon to glass bonding using the negative photoresist. The distance between the p+ and Al electrodes is $10{\mu}m$, and the thickness of the p+ diaphragm is $2{\mu}m$. The measurement of the characteristic of the actuator is performed at 50V. The center displacement of the diaphragm is $1.5{\mu}m$ at 10Hz. In comparison with the experimental data of the actuator with corrugated diaphragm, it is confirmed that the actuator with flat diaphragm is more effective than that with corrugated one in the small deflection region.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.685-693
• /
• 1990

The heat transfer coefficients were calculated numerically to see the effects of radiation around the porous medium put on the flat plate at a distance from the leading edge of flat plate for the two-dimensional laminar flows. To verify the analytical model developed and invoke the heat/mass transfer analogy, an experiment was carried out using naphthalene sublimation technique. From the effects of the wake, Sherwood number is maximum around the region where the porous medium is attached. The theoretical results correspond well with the experimental results at small Darcy number. Permeability of ceramic blocks used for experiment was also measured and the Forchheimer equation is applicable in our measurement range.

• Korean Journal of Remote Sensing
• /
• v.27 no.4
• /
• pp.411-420
• /
• 2011

In this study, a digital elevation model (DEM) in tidal flat of Suncheon Bay, one of the most ecological preserved area in the world, was generated from digital aerial stereo-images. The focal lengths for the aerial stereo-images were adjusted using ground control points (GCPs) in order to improve the accuracy of camera parameters. We proposed matching sizes suitable for generating DEM in tidal flat and a method for eliminating excessive position errors using intersection-distance($P_R$) threshold value. The accuracies of the DEM generated from the proposed method as well as the commercial S/W were compared with the elevation profiles measured by Total Station in the filed. As the results, the DEM generated by the proposed method showed better result (maximum deviation is a -21 centimeters) with detailed topography than DEM by the commercial S/W in the region. These results suggest that the DEM of tidal flat, which hardly obtained with the traditional methods, can be generated from digital aerial images by applying the proposed method in this study. We believe that the generated DEM in tidal flat can be an essential data for monitoring the sediment erosion and deposit of the tidal flat.

• Land and Housing Review
• /
• v.4 no.4
• /
• pp.371-382
• /
• 2013

This study performs an experimental investigation to evaluate the behavior of RC flat plate interior joints specimens. Three 60 percent scale Flat Plate interior specimens assemblies representing a portion of a Flat Plate Apartment Structural System subjected to simulated seismic loading (unbalanced moments) under constant axial load were tested, including one specimens with ordinary shear reinforcement and two specimens with folded bend type shear reinforcement. Test results are shown that (1) the design code KBC 2009 is accurate estimate the behavior of specimens. (2) Two types shear reinforcement have a similar structural behavior, but construction work of rebar with folded bend type shear reinforcement is easier than that of ordinary shear reinforcement. (3) In moderate seismic region, RC Flat Plate interior joint with folded bend type shear reinforcement is apply to structural design of Flat Plate.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.5
• /
• pp.59-76
• /
• 2009

This study was conducted to supply basic data for restoration and management of forests in Civilian Control Zone, with surveying naturalized plants around abandoned military camps. The total study sites are 72 abandoned military camps, from Gosung in east region to Paju in west region of Civilian Control Zone. The naturalized index of total area is 12.6%, and naturalized index of east and middle regions are 12.1% and 8.4%. But its index of west region is 15.9%. These results are due to geographical characteristics. The east and middle regions are in steep mountainous districts, and so but west region is flat district, and so naturalized plants was imported by only army. But west region is in flat districts, and so imported method of naturalized plants is very various. The main naturalized plants are Ambrosia trifida and Ambrosia artemisiifolia var. elatior in Civilian Control Zone. The main dispersion pattern of naturalized plants are gravity dispersion pattern ($D_4$) and wind and water dispersion pattern ($D_1$). The all naturalized plants are photophilic plants in survey sites. And so, if abandoned military camps are recovered to forests, the naturalized plants are disappeared because of the change of sunlight condition. So it is necessary to manage and recover forests, even if that area is Civilian Control Zone.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1107-1111
• /
• 2009

Flat panel multiview 3D displays developed in recent years have pseudoscopic regions that appear unnatural to viewers. We suggest a new method to suppress the pseudoscopic regions based on the visual characteristics of binocular rivalry. We confirm the validity of this method experimentally and show that the unnaturalness caused by pseudoscopic regions can be effectively suppressed.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.13 no.1
• /
• pp.14-21
• /
• 1984

The purpose of this investigation is to study heat transfer characteristics in wall jet region on a flat plate caused by upward impinging water jet. In the wall jet region, heat transfer results by impinging water jet are being compared with the ones with supplementary water. As the radius increases, the heat transfer coefficient in the wall jet region consquently decreases, but decreasing nozzle-heat plate distance, the reduction rate increases. The experimental equation is expressed as follows : $$\frac{N_{ur}}{P_r^{0.4}}{\cdot}\overline{\xi}=m(\overline{\eta}{\codt}Re{\delta})^n,\;m=0.034\~0.056,\;n=1.74\~2.007$$ The optimum height of supplementary water is obtained to improve heat transfer effect of wall jet region.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.768-773
• /
• 2004

When a gas expands through a convergent nozzle in which the ratio of the ambient to the stagnation pressures is higher than that of the critical one, the issuing jet from the nozzle is underexpanded. If a flat plate is placed normal to the jet at a certain distance from the nozzle, a detached shock wave is formed at a region between the nozzle exit and the plate. In general, supersonic moist air jet technologies with nonequilibrium condensation are very often applied to industrial manufacturing processes. In spite of the importance in major characteristics of the supersonic moist air jets impinging to a solid body, its qualitative characteristics can not even know. In the present study, the effect of the nonequilibrium condensation on the underexpanded moist air jet impinging on a vertical flat plate is investigated experimentally. Flow visualization and impact pressure measurement are performed for various relative humidities and flat plate positions. The obtained results show the plate shock and Mach disk are dependent on the nozzle pressure ratio and the relative humidity, but for a given nozzle pressure ratio, the diameters of the plate shock and Mach disk depend on the stagnation relative humidity. The impact pressure deviation from the flow of without condensation is large, as the relative stagnation humidity increases.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.869-877
• /
• 2017

Recently, Gomso Bay saw a decrease in the production of manila clam, which accounted for 17.8 % of production across the whole country in 2015, while Geunso Bay saw an increase that raised its contribution to 49.1 %. The tidal flats in these bays are inhabited by various benthos, and material flows in and out according to the tide. It is essential to understand the mass balance of these regions while giving consideration to the characteristics of these tidal flats. In this study, we compared areas where aquaculture farms were located in Gomso Bay with those without from May to August 2015. We divided the region into three sea areas (Sector I, Sector II, and Control), and the mass balance was estimated using the LOICZ model. As a result, the DIP of Sector II in Gomso Bay and another region in Geunso Bay, where a manila clam farm was located, were found to be -207.2 kg/day and 77.2 kg/day. The DIN was -4,996.7 kg/day and 926.6 kg/day. These results suggest that Gomso Bay han a higher density than Geunso Bay, which is thought to be mainly due to the feeding action of organisms. Therefore, in order to maintain a healthy tidal flat ecosystem and to sustain the production of manila clams, sustainable management to reduce the high density of tidal flat farms is necessary.