• 전자공학회논문지S
• /
• 제34S권3호
• /
• pp.84-96
• /
• 1997

In this paper an efficient morphologica algorithm for reducing gaussian and impulse noise in gray-scale image is presented. Based on the edge information the input image is partitioned into a flat region and an edge region, then different algorithms are selectively applied to each region. in case of impulse noise, MGR (morphologica grayscale reconstruction) algorithm with directional SE (structuring element) is applied to the flat region. For theedge region opening-closing (closing-opening) is used instead of dialation (erosion), so that the remaining noise around large objects can be removed. In case of gaussian noise, 5*5 OCCO(opening closing closing opening) and 3*3 DMF(directional morphological filter ) are used for the flat region and the edgeregion, respectively. In order to remove discontinuity at the edge boundary, the algorithm uses 3*3 OCCO around the edge region to reconstruct the final image. Experimetnal results have shown that the proposed algorithm achieves a high performance in terms of noise removal, detail preservation, and NMSE.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권5호
• /
• pp.25-32
• /
• 2000

In this paper, experiments investigating the high-temperature region heat transfer coefficients for the spray cooling of hot flat plates were performed by down spray water using flat spray nozzles. The heat transfer surface is made of copper and is 100mm in length and 40mm in width and 15mm in thickness. The experimental condition of spray are as follows: temperatures of the water droplets are T=20~$80^{\circ}C$ and droplets volume fluxes are D=0.001565~0.010438$m^3/m^2s$. Next, correlating equations for the heat transfer characteristics of spray cooling in the high temperature region are developed from the effects of droplets volume flux and the surface temperature of heat transfer plate.

• 소성∙가공
• /
• 제8권2호
• /
• pp.178-187
• /
• 1999

The Cross rolling between flat jaws, as a kind of hot forging, is the forming method to make the axisymmetric multi-step shaft by its rotation and pressure between flat jaws which move in opposite direction. The purpose of this study is to propose the optimal geometric data for shape development of the forward forming region. All data described on this paper are quantified by experiment from initial shape design to final shape development. As the result, proper geometric data are proved that lenth of the first forming area in the forward forming region is 1.5 times larger than circumference of work-piece and the progress angle changes 3 times smoothly.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.692-697
• /
• 2000

Recently, Flat flame burners are hilighted in high-load burners. Our study contains flow field analysis of a flat flame burner. In this paper, We analyzed the direction and magnitude of the velocity in a round tile type burner with swirl angles, $10^{\circ},\;30^{\circ},\;50^{\circ}$. In the case of swirl angle $10^{\circ}$, because axial momentum is larger than radial momentum, Recirculation region was weakly developed. In the case of swirl angle $50^{\circ}$, Flow in front of the tile is distributed for radial direction. And Recirculation region is large. So, We expect that the radiation can be transmitted from tiles and the recirculation region may cause $NO_x$ reduction.

• 한국통신학회논문지
• /
• 제17권3호
• /
• pp.213-224
• /
• 1992

저층 라플라시안 피라미드 영상의 부호화 방법을 제안하였다. 이 방법은 근본적으로 영역 분리와 벡터양지화 방법을 이용하였다. 저층 라플라시안 영상은 고층에 비하여 분산이 매우 작지만 공간 면적이 넓어 압축율에 크게 영향을 미친다. 바로 이 점에서 저층 영상을 분산값의 크기로 평탄/윤곽 영역으로 분리하여 평탄 영역은 평균값으로, 윤곽 영역은 벡터 양자화 방법으로 부호화하였다. 이 방법은 윤곽 영역만을 벡터 양자화함으로써 보다 효율적으로 윤곽 정보를 나타낼 수 있어서 평탄 영역에 의한 약간의 PSNR감소를 수반하지만 높은 압축율을 얻을수 있는 것이 장점이다. 컴퓨터 시뮬레이션 결과로 기존의 벡터 양자화 방법보다 압축율면이나 처리 시간면에서 효율적이라는 것을 알 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제8권9호
• /
• pp.812-817
• /
• 2002

This paper presents a development of high accuracy aligner and describes a method to find the orientation of a substantially circular disk shaped wafer with at least one flat region on an edge thereof. In the developed system, the wafer is spun one 360 degree turn on a chuck and the edge position is measured by a linear array to obtain a set of data points at various wafer orientation. The rotation axis may differ from wafer center by an unknown eccentricity. The flat angle is found by fitting a cosine curve to the actual data to obtain a deviation. The maximum deviation is then corrected for errors due to a finite number of data points and wafer eccentricity by calculating an adjustment angle from data points on the wafer fiat. After determining the flat angle the wafer is spun to the desired orientation. The wafer eccentricity can be calculated from four of the data points located away from the flat edge region. and the wafer is then centered.

• 한국항공운항학회지
• /
• 제11권2호
• /
• pp.33-42
• /
• 2003

In this paper, we propose an enhancement of the ultrasonic image for non-destructive inspection of aircraft composite materials. The ultrasonic images are corrupted by a speckle noise which has the characteristic of granular pattern noise and is in all types of coherent imaging systems, the signal independent and multiplicative noise. In this paper, we derive a filter, called the AWLF(Adaptive Window Log Filter), from the nature of the speckle. The filter is made of the MEAN Filter in the edge region and Log Filter in the flat or noise region. To make a distinction between edge and flat region, we calculate the inclination around the local window instead of computing the local statistics of pixels such as local mean ${\bar{M}}$ and standard deviation ${\sigma}_s$. According to the obtained region, edge region is performed by the mean filter and flat region by the Log filter. Performance of the proposed filter is evaluated by the Enhanced Factor$(F_e)$ and the Speckle Index(SI).

• 한국지반공학회논문집
• /
• 제23권1호
• /
• pp.67-76
• /
• 2007

대변형을 고려한 유한요소법을 이용하여 flat DMT의 3차원 관입을 모사하였다. 상용 프로그램으로 널리 알려진 ABAQUS/Explicit를 이용하여 flat DMT의 3차원 관입 해석을 수행하였으며 관입 도중에 발생되는 큰 요소 변형을 해결하기 위하여 adaptive meshing 기법을 도입하였다. 해석 결과를 바탕으로, flat DMT 시험방법으로부터 얻어지는 3가지 지수 중에 하나인 수평응력지수($K_{D}$)와 지반 설계 정수인 비배수 전단강도 간의 관계를 살펴보았다. 그 결과 $K_{D}=2$ 정규압밀지반에서는 Marchetti(1980)가 제안한 경험적 상관관계식과, $K_{D}$가 2이상으로 모사되는 과압밀지반에서는 Kamei & Iwasaki(1995)가 제안한 경험적 상관관계식과 잘 일치하는 결과를 제공하였다.

• Journal of Mechanical Science and Technology
• /
• 제18권7호
• /
• pp.1258-1266
• /
• 2004

It is important to completely understand heat/mass transfer from a flat plate because it is a basic element of heat/mass transfer. In the present study, local heat/mass transfer coefficient is obtained for two flow conditions to investigate the effect of boundary layer using the naphthalene sublimation technique. Obtained local heat/mass transfer coefficient is converted to dimensionless parameters such as Sherwood number, Stanton number and Colburn j-factor. These also are compared with correlations of laminar and turbulent heat/mass transfer from a flat plate. According to experimental results, local Sherwood number and local Stanton number are in much better agreement with the correlation of turbulent region rather than laminar region, which means analogy between heat/mass transfer and momentum transfer is more suitable for turbulent boundary layer. But average Sherwood number and average Colburn j-factor representing analogy between heat/mass transfer and momentum transfer are consistent with the correlation of laminar boundary layer as well as turbulent boundary layer.

• 대한물리치료과학회지
• /
• 제18권4호
• /
• pp.81-85
• /
• 2011

Purpose : The purpose of this study was to investigate the changing plantar foot pressure by the backpack load of 0, 10, 15, and 20% of their body weight while level walking in flat foot and so to recommend suitable backpack weight limitations for flat foot subjects. Method : 14 young flat foot subjects($24.29{\pm}2.16yrs$) participated in this study. the subjects were assigned to carry backpack load and there was four level walking modes : (1) unloaded walking(0%), (2) 10% body weight(BW) load, (3) 15% BW load and (4) 20% BW load. Repeated ANOVA was used to compare each region data of foot according to different backpack weight. Results : As backpack load became increased, the contact area of midfoot was significantly increased, and contact area of forefoot and rearfoot were significantly decreased. maximum pressure at each region during walking tended to be greater as the load increased, but a significant difference was found only for the heel medial and lateral regions Conclusion : Based on this data, the weight of backpack could influenced structure and function of the foot in flat foot.