• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.3
• /
• pp.84-96
• /
• 1997

In this paper an efficient morphologica algorithm for reducing gaussian and impulse noise in gray-scale image is presented. Based on the edge information the input image is partitioned into a flat region and an edge region, then different algorithms are selectively applied to each region. in case of impulse noise, MGR (morphologica grayscale reconstruction) algorithm with directional SE (structuring element) is applied to the flat region. For theedge region opening-closing (closing-opening) is used instead of dialation (erosion), so that the remaining noise around large objects can be removed. In case of gaussian noise, 5*5 OCCO(opening closing closing opening) and 3*3 DMF(directional morphological filter ) are used for the flat region and the edgeregion, respectively. In order to remove discontinuity at the edge boundary, the algorithm uses 3*3 OCCO around the edge region to reconstruct the final image. Experimetnal results have shown that the proposed algorithm achieves a high performance in terms of noise removal, detail preservation, and NMSE.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.5
• /
• pp.25-32
• /
• 2000

In this paper, experiments investigating the high-temperature region heat transfer coefficients for the spray cooling of hot flat plates were performed by down spray water using flat spray nozzles. The heat transfer surface is made of copper and is 100mm in length and 40mm in width and 15mm in thickness. The experimental condition of spray are as follows: temperatures of the water droplets are T=20~$80^{\circ}C$ and droplets volume fluxes are D=0.001565~0.010438$m^3/m^2s$. Next, correlating equations for the heat transfer characteristics of spray cooling in the high temperature region are developed from the effects of droplets volume flux and the surface temperature of heat transfer plate.

• Transactions of Materials Processing
• /
• v.8 no.2
• /
• pp.178-187
• /
• 1999

The Cross rolling between flat jaws, as a kind of hot forging, is the forming method to make the axisymmetric multi-step shaft by its rotation and pressure between flat jaws which move in opposite direction. The purpose of this study is to propose the optimal geometric data for shape development of the forward forming region. All data described on this paper are quantified by experiment from initial shape design to final shape development. As the result, proper geometric data are proved that lenth of the first forming area in the forward forming region is 1.5 times larger than circumference of work-piece and the progress angle changes 3 times smoothly.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.692-697
• /
• 2000

Recently, Flat flame burners are hilighted in high-load burners. Our study contains flow field analysis of a flat flame burner. In this paper, We analyzed the direction and magnitude of the velocity in a round tile type burner with swirl angles, $10^{\circ},\;30^{\circ},\;50^{\circ}$. In the case of swirl angle $10^{\circ}$, because axial momentum is larger than radial momentum, Recirculation region was weakly developed. In the case of swirl angle $50^{\circ}$, Flow in front of the tile is distributed for radial direction. And Recirculation region is large. So, We expect that the radiation can be transmitted from tiles and the recirculation region may cause $NO_x$ reduction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.3
• /
• pp.213-224
• /
• 1992

An encoding technique based on region splitting and vector quantization is proposed for the lower level Laplacian pyramid images. The lower level Laplacian pyramid images have lower variance than higher levels but a great influence on compression ration due to large spatial area. And so from data compression viewpoint, we subdivide them with variance thresholding into two regions such as one called : flat region” and the other “edge region”, and encode the flat region with its mean value and the edge region as vector quantization method. The edge region can be reproduced faithfully and significant improvement on compression ratio can be accomplished with a little degradation of PSNR in spite of the effect of large flat region since the codebook used is generated from the edge region only on from the entire image including the flat region. It can be verified by computer simulation results that proposed method is more efficient in compression ratio and processing time than the conventional encoding technique of vector quantization.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.9
• /
• pp.812-817
• /
• 2002

This paper presents a development of high accuracy aligner and describes a method to find the orientation of a substantially circular disk shaped wafer with at least one flat region on an edge thereof. In the developed system, the wafer is spun one 360 degree turn on a chuck and the edge position is measured by a linear array to obtain a set of data points at various wafer orientation. The rotation axis may differ from wafer center by an unknown eccentricity. The flat angle is found by fitting a cosine curve to the actual data to obtain a deviation. The maximum deviation is then corrected for errors due to a finite number of data points and wafer eccentricity by calculating an adjustment angle from data points on the wafer fiat. After determining the flat angle the wafer is spun to the desired orientation. The wafer eccentricity can be calculated from four of the data points located away from the flat edge region. and the wafer is then centered.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.11 no.2
• /
• pp.33-42
• /
• 2003

In this paper, we propose an enhancement of the ultrasonic image for non-destructive inspection of aircraft composite materials. The ultrasonic images are corrupted by a speckle noise which has the characteristic of granular pattern noise and is in all types of coherent imaging systems, the signal independent and multiplicative noise. In this paper, we derive a filter, called the AWLF(Adaptive Window Log Filter), from the nature of the speckle. The filter is made of the MEAN Filter in the edge region and Log Filter in the flat or noise region. To make a distinction between edge and flat region, we calculate the inclination around the local window instead of computing the local statistics of pixels such as local mean ${\bar{M}}$ and standard deviation ${\sigma}_s$. According to the obtained region, edge region is performed by the mean filter and flat region by the Log filter. Performance of the proposed filter is evaluated by the Enhanced Factor$(F_e)$ and the Speckle Index(SI).

• Journal of the Korean Geotechnical Society
• /
• v.23 no.1
• /
• pp.67-76
• /
• 2007

Flat DMT penetration was analyzed using a finite element model based on a large strain formulation. The ABAQUS/Explicit, a commercial finite element method, was used to study the flat DMT penetration in soils. Then, because the very large mesh distortion occurred due to the penetration of flat DMT, the adaptive meshing technique was utilized to maintain a high quality mesh configuration. The undrained shear strength obtained from the flat DMT is estimated using only the horizontal stress index ($K_{D}$) and so it became necessary to examine using the analysis results obtained from the penetration of the flat DMT. Analysis results show that in normally consolidated region of $K_{D}=2$, the results obtained from the correlations proposed by Marchetti show good agreement with those estimated from the finite element method. The present analysis also shows that in overconsolidated region of $K_{D}>2$, the results obtained from the relationships proposed by Kamei and Iwasaki show good agreement with those provided by the penetration analysis.

• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1258-1266
• /
• 2004

It is important to completely understand heat/mass transfer from a flat plate because it is a basic element of heat/mass transfer. In the present study, local heat/mass transfer coefficient is obtained for two flow conditions to investigate the effect of boundary layer using the naphthalene sublimation technique. Obtained local heat/mass transfer coefficient is converted to dimensionless parameters such as Sherwood number, Stanton number and Colburn j-factor. These also are compared with correlations of laminar and turbulent heat/mass transfer from a flat plate. According to experimental results, local Sherwood number and local Stanton number are in much better agreement with the correlation of turbulent region rather than laminar region, which means analogy between heat/mass transfer and momentum transfer is more suitable for turbulent boundary layer. But average Sherwood number and average Colburn j-factor representing analogy between heat/mass transfer and momentum transfer are consistent with the correlation of laminar boundary layer as well as turbulent boundary layer.

• Journal of Korean Physical Therapy Science
• /
• v.18 no.4
• /
• pp.81-85
• /
• 2011

Purpose : The purpose of this study was to investigate the changing plantar foot pressure by the backpack load of 0, 10, 15, and 20% of their body weight while level walking in flat foot and so to recommend suitable backpack weight limitations for flat foot subjects. Method : 14 young flat foot subjects($24.29{\pm}2.16yrs$) participated in this study. the subjects were assigned to carry backpack load and there was four level walking modes : (1) unloaded walking(0%), (2) 10% body weight(BW) load, (3) 15% BW load and (4) 20% BW load. Repeated ANOVA was used to compare each region data of foot according to different backpack weight. Results : As backpack load became increased, the contact area of midfoot was significantly increased, and contact area of forefoot and rearfoot were significantly decreased. maximum pressure at each region during walking tended to be greater as the load increased, but a significant difference was found only for the heel medial and lateral regions Conclusion : Based on this data, the weight of backpack could influenced structure and function of the foot in flat foot.