• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.153-157
• /
• 2009

A Highly efficient Mercury-free Flat Fluorescent Lamp (MFFL) with dielectric barrier Xe gas discharge was developed for an alternative of conventional line-type Cold Cathode Fluorescent Lamps (CCFLs) which shows a wide voltage margin and a stable discharge operation for diffuse glow discharge with an application of a auxiliary electrode. Electro-optic characteristics of the MFFL were examined through the changes in ambient temperature, total pressure and Xe partial pressure. the single cell is expanded into a multi-structured configuration to realize a large sized lamp by a simple repetition of the single cells, and a new driving scheme is proposed for an adaptive brightness control using dual auxiliary electrodes and bi-polar drive scheme. In addition, interesting application of this ultra high luminance flat lamp by the optimization of the gas condition and the pattern of the rear phosphor layer is suggested as a good alternative of daylight lamp source

• 천문학회보
• /
• 제36권2호
• /
• pp.155.2-155.2
• /
• 2011

We present development of the calibration system for IGRINS (the Immersion GRating Infrared Spectrograph). We mainly use Th-Ar and U hollow cathode lamp as the spectral calibration source and telluric features can be used additionally. For the flat source, we selected a 3000K tungsten halogen lamp with 2 inch integrating sphere. From Light Tools simulation, the result flat image through calibration optics satisfied <1% flatness error requirement. We also present mechanical design of calibration box that will be attached on the IGRINS dewar. Three moving stages are designed to perform switching mechanism between all of the observing modes - target observation, flat, precision RV measurement, and spectro-polarimetric observation.

• 한국전기전자재료학회논문지
• /
• 제26권6호
• /
• pp.488-492
• /
• 2013

Current limiting diode (CLD) was fabricated using junction field effect transistor (JFET) structured two small cells and eight large cells. Two small cells and eight large cells were connected in parallel and the obtained constant current was 110 mA. The application of CLD in each of the parallel circuits on chip on board (COB) type LED lighting source, could significantly reduce the current deviation within the parallel circuits. The applications of CLD on AC power small lighting source, battery power low voltage parallel lighting source and AC flat lighting source were investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1189-1192
• /
• 2008

A new mercury-free flat fluorescent lamp with a single cell having dimension 2.2inches across the diagonal, had been developed which shows a wide, stable operating voltage margin, high luminance and luminous efficacy by adopting the bipolar pulse drive scheme. In this paper, the single cell is expanded into a multi-structured configuration to realize a 32inch sized panel across the diagonal by a simple repetition of the single cells. A driving scheme is proposed for a 2-bit areal selective dimming using dual auxiliary electrodes and bipolar drive scheme.

• 정보저장시스템학회논문집
• /
• 제6권1호
• /
• pp.1-5
• /
• 2010

Holographic data storage system(HDSS) has many noise sources - crosstalk, scattering and inter pixel interference, etc. Generally the intensity of a light generated from the laser source has Gaussian distribution and this ununiformity of light also can make the data page to have a low SNR. A beam apodizer is used to make the laser as a flat-top beam but the intensity distribution is not strictly uniform. The intensity of light can be controlled using image mask. In this paper the intensity distribution of light used for HDSS is controlled by a digital image mask. The digital image mask is changed arbitrarily in real-time with suggested algorithm for the HDSS.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1489-1491
• /
• 2004

PD in air is accompanied by light, sound and electromagnetic wave. Light and sound can be prevented from blocking between PD sources and sensor but electromagnetic wave can be transferred to long distance without any interference an captured by antenna. This paper investigated the wideband antenna is appropriate for sensing Partial discharge in air. PD was generated from simulated PD source which consist of needle and flat electrode with small gap. Signals obtained from wideband antenna were diminished in both time and frequence region with the distance between PD source and antenna.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.45-47
• /
• 2005

The Dielectric Barrier micro-hollow cathode structure and it's upper pD limitation are investigated for determining of optimum hollow cathode discharge condition. In experiment, discharge is sustained by AC diriving and investigated gas is pure Xe. From Experiment, Optimum pD range is lower than 0.72 torr.cm at pure Xe and Cu cathode.

• 한국광학회지
• /
• 제20권6호
• /
• pp.334-338
• /
• 2009

최근 디스플레이 기기의 수요가 증대되면서 대면적 노광에 대한 요구가 증대되고 있는데, 내부전반사(total internal reflection: TIR)홀로그래픽 리소그라피는 대면적 노광을 위한 효과적인 방법으로 연구가 진행되고 있다. TIR 홀로그래피에서는 일반적으로 레이저를 이용하여 영상을 기록하고 재생한다. 그러나 자외선 램프와 같은 비가간섭광을 이용하여 재생한다면, 가간섭성에 의해 나타나는 영상잡음을 줄일 수 있고, 대면적 노광에도 보다 용이할 것이다. TIR 홀로그램의 재생을 위하여 자외선 램프를 이용할 때, 램프의 유한한 선폭과 확산각이 재생 영상에 미치는 영향을 분석하고, 재생패턴에 나타나는 선폭 확대 결과를 실험을 통하여 검증하였다. ${\mu}m$ 규모의 선폭을 갖는 대면적 패턴을 TIR 홀로그램으로부터 얻기 위한 재생 광원으로, 가간섭성 광원인 레이저 대신 저잡음성과 경제성을 갖춘 일반적인 자외선 램프의 사용이 가능할 것으로 기대된다.

• 조명전기설비학회논문지
• /
• 제29권2호
• /
• pp.19-26
• /
• 2015

This paper presents design, fabrication, and performance evaluation of a high voltage power supply for Carbon Nano Tube-based planar light sources. The proposed power supply employs an LLC resonant half-bridge converter and a sixfold voltage-multiplying rectifier. Steady-state characteristics of the voltage-multiplying rectifier are analyzed and used to derive the input-to-output voltage conversion ratio of the power supply. The input-to-output frequency response characteristics of the LLC tank circuit are analyzed and utilized in designing a proto-type power supply which produces a 15 KV output using a 400 V input source. The high-voltage transformer is fabricated using a sectional bobbin structure with an epoxy impregnation, in order to provide sufficient insulation for high voltage operations. The performance of the proposed power supply is confirmed with stable and reliable operations at the 15 KV output from no load to nominal load conditions. The proposed power supply is well suited as an electric ballast required stable operations of Carbon Nano Tube-based planar light sources.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1165-1168
• /
• 2005

We review discharge characteristics of fluorescent lamps having noncircular cross sections. The developmental and theoretical history of noncircular cross-section lamps is summarized chronologically. In particular, discharge characteristics of noncircular cross-section lamps will be summarized and analyzed including plasma contraction, electron temperature, and ambipolar diffusion loss, which might give us some insights into the way to develop more efficient and uniform flat fluorescent lamps, which have recently arisen as a new light source of large-size backlight units for LCD TV applications.