• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.475-480
• /
• 2008

Hemming, especially curl hemming, is required along the wheel housing for safety. Robot roller hemming is suitable for it. In this paper, both the flat hemming and the curl hemming along either the straight profile or the curved profile are analyzed using finite element program MSC.Marc to verify the hemming test results. Both the inner panel and the outer panel are modeled using 3-D solid elements and the roler is modeled using rigid surface. In the curl hemming, there is a case that the curl is not formed if the pre-hemming force is not sufficient. It agrees with the test results.

• 대한기계학회논문집A
• /
• 제28권2호
• /
• pp.149-157
• /
• 2004

Implicit finite element analysis of the flat surface-straight edge hemming process is performed by using a commercial code ABAQUS/Standard. Methods of finite element modeling for springback simulation and contact pair definition are discussed. An optimal mesh system is chosen through the error analysis that is based on the smoothing of discontinuity in the state variables. This study has focused on the investigation of the influence of process parameters in flanging, pre-hemming and main hemming on final hem quality, which can be defined by turn-down, warp and roll-in. The parameters adopted in this parametric study are flange length, flange angle, flanging die corner radius, face angle and insertion angle of pre-hemming punch, and over-stroke of pre-hemming and main hemming punches.

• 복식
• /
• 제59권3호
• /
• pp.131-144
• /
• 2009

This study is about single-layered $Chog{\breve{a}}ri$ excavated from SongHyosang(宋效商, 1430-1490, SHS hereafter), SongHeeJong(宋喜從, the late 1500s, SHJ hereafter) tombs. There are 7 single-layered $Chog{\breve{a}}ris$ for men. We focus on comparison of their design and sowing method. 1. Design: Investigating collar, $Chog{\breve{a}}ris$ from SHS have MokpanGit and $Chog{\breve{a}}ris$ from SHJ have KalGit. KalGit has been seen from SHJ to 17th, 18th and 19th centuries. After the late 1500s, there is no MokpanGit single-laTered $Chog{\breve{a}}ri$ for men. Side panel under arm has various shapes(triangle, trapezoid, triangle+trapezoid) in 15th century. After the late 1500s, It changes into no side panel. Two $Chog{\breve{a}}ris$ with no side panel from SHJ reveals that the late 1500s is a period of transition. 2. Sewing method: First, researching lengthwise grainline of the fly, the left fly has lengthwise grainline outside In four, inside in three. The right fly has lengthwise grainline outside in just one, the others have lengthwise grainline inside. Compared with today's way, there is a great difference, but in those times there isn't an established rule. This is true of side panel under arm. The sewing method are backstitch, running stitch, and hemming. Researching the construction method of seam, in putting two selvages together, open seam and plain seam are used. In putting selvage and bias, bias and bias together, flat felled seam and french seam are used. This study shows that single-layered $Chog{\breve{a}}ri$ far men from 15C. to 16C. has changes of design such as collar(Git) and side panel undo. arm. But there is little change in sewing method.

• 복식
• /
• 제57권3호
• /
• pp.14-22
• /
• 2007

This study is about the excavated costume representing fundamental "Conservation and Restoration". It's not a report of a specific case, but it is a guideline that contains the costume and textile of museum collection. It is not research based on experiments; however, this paper is basically consists of various reported-documents. Followings are the conclusions of this study 1. These are the factors that we have to know to prevent the causes of fabric's degradation. -Light, -Humidity and temperature, -Microscopic organism, -Insect and rodent animal, -Air pollution, -Ph, -Handling 2. Basic principles of conservation and restoration follows are: -Select the Reversible method, -Represent the easily distinguishable repaired place, -Should be acted by an expert or people with experience, -Before the restoration, accurate and specified records should be completed, -Procedure, treatment method, and materials used should be recorded prior to restoration, -Should be cared minimally, -Be cautious when using the conservation materials, -When caring, make sure nothing is against the principle of aesthetic, historic, and form of preservation 3. The types of restoration are type of straight or curve, type of hole, type of without warp or weft, type of special part damage something like sleeve, collar, type of form that is severely damaged, and type of separated pieces. 4. The method of restoration is sewing, stitching, and the combination of sewing and stitching. 5. The restoration seams are welt seam, plain seam, flat felled seam, french seam etc. And there are kinds of used-sewing, such as, broad stitching, backstitch, half backstitch, basking, hemming, saddle stitching etc.

• 한국의상디자인학회지
• /
• 제11권1호
• /
• pp.133-153
• /
• 2009

Clothing was excavated when the Bae's clan of Seong-san, Yeong-dong, Chung-buk in Sep. 2, 2004. The tombs that the clothing could be restored were the tombs of Bae Cheon-jo(10th generation) and the tomb of Mrs. Nam of Go-seong, the wife of Bae Sang-gyeong(1lth generation). For identifying the features and methods of sewing used for the clothing of man and woman around Po(coat in Korea in the past) in the 16th to 17th century, this study investigated 12 items from Bae Cheon-jo's tomb(Sibok, Dopo(robe), Jungchimak(outer coat with large sleeves) and Gwa-du and 5 items(Jangok(lady's cloak) and Jungchimak) from Mrs. Nam's tomb of Go-seong. For sewing, broad-stitching, hemming and even-back-stitching were used the most in that order. Furthermore, various kinds of sophisticated stitching including old flat felled seam, decorative saddle stitching and buttonhole stitch, clothing made roughly as a shroud and fabric attached on the clothing were also observed. We may not have many opportunities to understand the change of clothing in Korea from mid 16th century to mid 17th century through the clothing of father-in-law and daughter-in-law in a family. As a result, we will be able to understand the features of sewing in a family and from the 16th century to the 17th century.