• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.92-98
• /
• 2002

End mill is an essential tool to generate complex surface in workpiece and it has been developed with various materials and tool shapes. The most important factor to evaluate the performance of end mill is still the wear characteristics of flank face. In addition to the flank wear, the tool edge roughness generated by the chipping is another important factor in aspects of material property and machinability evaluation and affects the quality of machined surface. Up to now, there is no direct method for measurement of tool edge roughness. In this study, the tool edge roughness of flat end mill is indirectly measured along the axial direction of workpiece. The theoretical equation is derived in consideration of tool geometry. Finally, the optimal conditions to measure the tool edge roughness by the proposed method are presented through the theoretical review and experimental identification.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.34-41
• /
• 1993

SUS304 is wellknown as difficult-to-machine materials. It is easy to appear workhardened, and workhardening is one of the causes of groove wear on the tool. In this paper, the author would like to compare the width of flank wear with that of groove wear, and to find whether the groove wear can be used as a criterion of a tool life. The design of the twelve tests provides three levels for each variable (speed: 200m/min, 118m/min, 70m/min; feed: 0.3mm/rev, 0.17mm/rev, 0.1mm/rev; depth of cut: 0.4mm, 0.28mm, 0.2mm). The study of tool-life testing by statistical technique follows usual most scientific sequence. So the tool-life predicting equation is calculated by the method of least squares. The overall adequacy of the model can be verified by the analysis of variance. The results obtained are as follows : 1) When SUS304 is cut in 200(m/min), the width of flank wear is much larger than that of groove wear. 2) In cutting speed 118m/min, flank wear is a little larger than groove wear and in the cutting speed 70m/min, the latter is a little larger so that it is reasonable to determine the tool life according the crierion by groove wear in the low cutting speed (less than 70m/min). 3) Owing to the burr the depth of engagement along the cutting edge is extended toward the shank.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.3
• /
• pp.155-159
• /
• 1990

The growth of lean from nine wholesale cuts in relation to the total lean weight in carcass side were evaluated with three allometric equations for 18 Najdi male camels slaughtered at 8, 16 and 26 months of age. The allometric growth coefficients indicated that as the camels grew, weights of lean form brisket and flank cuts increased relatively more rapidly than the total lean in carcass side (${\beta}$ >1.1) and that weights of lean from wholesale shoulder and rump cuts increased relatively less rapidly (${\beta}$ <.9) than the total lean weight from carcass side. The growth coefficients for the lean in the thoracic limb and pelvic limb showed a dorsoventral rise in the growth impetus, with coefficients for the thoracic limb correspondingly higher than those of pelvic limb. The growth coefficients for the lean from shoulder, rib, flank and leg cuts increased (p<.01) with increased weight of total lean in carcass side, whereas it decreased with increased total lean weight in carcass side for the lean in neck, brisket, plate, loin and rump cuts. At a constant weight of total lean in carcass side, older camels had larger coefficients for lean in neck, brisket, rump, flank and leg cuts, but had smaller coefficients for lean in shoulder, rib, plate and loin cuts.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.6
• /
• pp.830-836
• /
• 2011

Most of pitch/yaw reducers consist of several planetary geartrains. Planetary geartrains make gearboxes to be small and light, low noise and good efficiency. Most important thing in the planetary geartrain is load distribution on the gear tooth flank. In this study, the effect of output shaft bearings on the load distribution of gear tooth flank has been investigated. The commercial software was employed to compare the load distribution of two models depending on the bearing type. The spherical roller bearing(SRB) and the cylindrical roller bearing(CRB) were used as output shaft bearings in the $1^{st}$ model, and two taper roller bearings(TRB) were used in the $2^{nd}$ model. As a result, it was found that the $2^{nd}$ model. showed better performances on the load distribution of gear tooth flank, this results stated that the output shaft bearing system could be important consideration when designing reducers for wind turbine systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1287-1294
• /
• 2003

The wear process of end mill is so complicated process that a more reliable technique is required for the monitoring and controlling the tool life and its performance. This research presents a new tool wear monitoring method based on the sound signal generated on the machining. The experiment carried out continuous-side-milling for 4 cases using the high-speed-steel end mill under wet condition. The sound pressure was measured at 0.5m from the cutting zone by a dynamic microphone, and was analyzed at frequency domain. As the cutter impacts the workpiece surface, a situation of farced vibration arises in which the dominant forcing frequency is equal to the tooth passing frequency of the cutter. The tooth passing frequency appears as a harmonics form, and end mill flank wear is related with the first harmonic. It is possible to detect end . mill flank wear. This paper proposed the new method of the end mill wear detection.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.1 no.2
• /
• pp.41-47
• /
• 2006

Objectives: The aim of this study is to notify incidental diagnosis of multiple myeloma during conservative treatment for lumbar disc herniation, caused by right flank pain. Methods: A 45-year-old female came to our hospital for the control of pain caused by lumbar disc hemiation L5-S1. After using Cox technique, she occured right flank pain and found out multiple fracture by bone scan. For further evaluation, she was diagnosed with multiple myeloma with bone marrow biopsy. Results and Conclusions: This case report suggests that clinicians should consider the possibility of multiple myeloma in the case of multiple fracture without trauma.

• The Journal of Internal Korean Medicine
• /
• v.24 no.1
• /
• pp.144-150
• /
• 2003

Back pains include pain in one or both side costa portion and lateral abdomen. There are different kinds of flank-related disease such as intercostal nerve pain, chronic gastritis, duodenitis, herpes zoster, pepticulcer, cholecystitis, cholelithiasis and so on. Back pain arises from pathological abnormal activities. On the other hand psychogenic pains are caused by psychogenic factors without pathological abnormal activities. This is similar to KiWol back pain, which resulted from psychogenic factors like stress, anxiety, anger and etc. In oriental medicine, KiWol is the state of depression of Ki, and Shihosogansan used to treat the back pain diagnosed as stagnation of the liver Ki. So, we decided to apply Shihosogansan to a patient who suffered from back pain diagnosed as stagnation of the liver Ki. Therefore the patient treated with Shihosogansan and improved in consciousness symptoms, so we report it for the better treatment.

• Journal of Haehwa Medicine
• /
• v.14 no.1
• /
• pp.149-154
• /
• 2005

I have come to next conclusions in consequence of documentary study about medical books of many generations regarding Medical treatment with Acupuncture Point of Flank pain. The urinary bladder channel of foot-taiyang is most used. Next there are the ren channel, the gall baldder channel of foot-shaoyang, the liver channel of foot-jueyin, the triple-warmer channel of hand-shaoyang, the kidney channel of foot-shaoyin, the stomach channel of foot-yangming, the spleen channel of foot-taiyin, the pericardium channel of hand-jueyin, the lung channel of hand-taiyin, the small intestine channel of hand-taiyang, the large intestine channel of hand-yangming, the heart channel of hand-shaoyin in the order of frequency in used channel among the twelve channels. The liver channel of foot-jueyin is most used. The gall baldder channel of foot-shaoyang, the urinary bladder channel of foot-taiyang, the triple-warmer channel of hand-shaoyang, the spleen channel of foot-taiyin, the stomach channel of foot-yangming, the ren channel, the small intestine channel of hand-taiyang, the kidney channel of foot-shaoyin, the pericardium channel of hand-jueyin, the large intestine channel of hand-yangming, the lung channel of hand-taiyin, the heart channel of hand-shaoyin in the order of frequency in used point among the twelve channels.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.32-38
• /
• 1998

For the purpose of monitoring the abnormal state in proportion to cutting in automatic production process, the 3 kinds of specimens different from mechanical properties by austempering through temperature variation were manufactured, and the effects of tool wear on thrust and AE RMS was analyzed with sequential drilling in in-process. When the ADI specimens were drilled, the relationship of thrust and AE RMS with flank wear was studied through experiments, and it is confirmed that the reliable wear state is able to be monitored by using these signals. It was shown that thrust and AE RMS increased slowly till flank wear reached to V$_{B}$ = 0.25mm, and they increased steeply over the value. The effective tool exchange time was able to be pre-estimated by using this fact. It was validated that the tool breakage was able to be detected on the real time by monitoring in in-process.s.

• Journal of Veterinary Clinics
• /
• v.36 no.4
• /
• pp.238-243
• /
• 2019

A 6-year-old, spayed female Maltese was presented with the condition of a chronic recurrent abscess formation in the left flank region. Despite the antibiotics and drainage therapy given to the dog, the lesion formed a continued serosanguineous to the point that a purulent discharge was evident. In the meantime, an abdominal ultrasound revealed the presence of a well-defined mass with a hypoechoic outer margin, and a hyperechoic inner rim in the cranial of the kidney. A fistula was noted as being present with a connection between the subcutaneous lesion of the left flank and the abdominal mass. It is emphasized that CT scans revealed the existence of a soft tissue dense mass with low attenuation area, as seen in some internal areas and also a peripheral contrast enhancement was noted within a nonenhancing central region. There was additional nonenhancing fluid found dorsal to the inflammatory tract passing under the epaxial muscles and at the peritoneum. Likewise, the tract exited the skin surface in the left flank. A tentative diagnosis of an abdominal abscess with spontaneous cutaneous fistula was made based on the ultrasonographic and CT appearances. A foreign body such as surgical gauze should always be considered a potential cause of draining tract in small animals, as was considered to be the problem in this case.