• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.25-35
• /
• 2010

The periodic application effects of two different herbicides on soil physical properties were observed in a slightly hilly orchard of pear tree located on the southestern flank of the Palbong Mountain in Gongju Chungnam : (1) bare surface vegetation; (2) glyphosate-treated plot; (3) paraquat-treated plot. The slope of experimental plots ranged from 5.5%to 10.2%at an altitude of 125 mand 896 $m^2$ ($28m{\times}32m$) in area. The total respective rainfall events were 47, 52, 52 times during experimental period from 2006 to 2008, while approximately 65 percent of daily rainfall intensity from2006 to 2008 was less than 20 mm a day. The organic matter contents on the surface 15 cm soil ranging from1.23%to 1.84%in 2006 were changed into from1.35 %to 2.28%in 2008 in the order of control > glyphosate > paraquat > bare plot in 2008, indicating that the herbicide treatment influenced the accumulation organic matter in soil. The changes in soil particle contents showed that the loss of soil particles in top 5 cm soil depth was greater in a bare soil than in other treatments such as control, glyphosate, and paraquat-treated plot. The net changes in the bulk densities showed that there were little variations between May of 2006 and Nov. of 2008 even though there were some losses of the soil particles. The soil strength of the glyphosate-treated bare plots was much greater than those of other plots such as control, glyphosate, and paraquat plots. However the soil strengths in control plots were lower than those in the plots of glyphosate and paraquat treated ones.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.29 no.2
• /
• pp.65-81
• /
• 2016

Objectives : Haedoksamul-tang (HSTE), a water extract from a mixture of Phellodendri Cortex, Coptidis, Scutellariae Radix, Gardeniae Fructus, Angelica acutiloba Radix, Cnidii Rhizoma, Paeoniae Radix, Rehmanniae Radix, has been traditionally used for allergic skin diseases such as atopic dermatitis and contact dermatitis in oriental countries. However, little is known about the effects of aqueous extract of HSTE on trimellitic anhydride (TMA)-induced contact hypersensitivity (CHS) in a mouse model. Methods : In this study, we investigate the pharmacological effects of HSTE on TMA-induced CHS in Balb/c mice. Contact hypersensitivity was induced in mice by topically sensitizing and challenging with TMA in flank skin and ears during oral administration (for 17 days) and topical treatment (30 min before challenge) with HSTE. We examined the effects of HSTE on IgE and IgG1 levels, inflammatory parameters in ear tissues, CD4⁺/CD8⁺ ratio, cytokine and chemokine production in sera, tissues, and immune cells from TMA-sensitized mice.Results : Oral and topical administration with HSTE reduced, in a dose dependent manner, thickness and leukocyte infiltration of ear tissues and IgE levels in serum from mice sensitized with TMA. In addition, auricula lymph node cells isolated from TMA-sensitized mice significantly elevated the expression ratio of CD4⁺/CD8⁺ as well as increased the production of IL-4, IL-5, IL-13 and IFN-γ by ex vivo stimulation with antibodies against CD3 and CD28, and these inflammatory indexes, except for IFN-γ, were significantly suppressed by orally and topically administration of HSTE. Furthermore, stimulation of auricula lymph node cells from TMA-sensitized mice with antibodies against CD3 and CD28 increased the production of MCP-1/CCL2 and MIP-1α/CCL3, and these effects were inhibited in a dose-dependent manner in cells from mice treated with HSTE. Conclusions : These results suggest that HSTE can be used for treating contact hypersensitivity by inhibiting leukocyte infiltration as well as production of serum IgE and chemokine/Th2 cytokine in an animal model.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.4
• /
• pp.825-829
• /
• 2006

Rhus verniciflua Stokes has been used for treatment of blood stasis and abdominal mass in Oriental medicine. Rhus verniciflua Stokes has been experimentally reported to exert antioxidant, antiproliferative, antithrombotic and apoptotic activities. In the present study, the antiangiogenic and in vivo antitumor activities of aqueous extract of processed Rhus verniciflua Stokes (Nexia) by heat were examined to elucidate its anticancer mechanism. Nexia showed weak cytotoxiicty against human umbilical vein endothelial cells (HUVEC) and Lewis lung carcinoma cells (LLC) with IC50 of${\sim}200\;{\mu}g/ml\;and\;>200\;{\mu}g/ml$, respectively. Nexia significantly inhibited the proliferation and migratory activity in vascular endothelial growth factor(VEGF) treated HUVEC. Furthermore, Nexia effectively suppressed the tumor volume in A549 nonsmall lung cancer bearing athymic nude mice, CanN. Cg-Foxn 1nu/CrljBgi up to 40.7% as well as tumor weight incised from LLC cells innoculated into the flank of C57BL/6 mice up to -50% compared with untreated control at a dose of 300 mg/kg. Taken together, these results suggest that processed Rhus verniciflua Stokes may inhibit the growth of Lewis lung carcinoma cells partly via inhibition of angiogenesis and can be potently applied to angiogenesis dependent cancers. However, it still needs a further research on molecular mechanism, angiogenesis animal study and clinical trial in future.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.2
• /
• pp.62-75
• /
• 1986

An experimental investigation of the machining characteristics such as cutt- ing resistance, surface roughness and tool wear in turning the test pieces of SM45C steel with both coated and uncoated carbide tool tips under various cutting conditions was conducted. Also a specially designed simple vibration damping device was experimentally evaluated for its effectiveness on machined surface roughness and a vibration test was conducted to confirm its ability to reduce the amplitude. Based on these tests finding, the following conclusions are made; 1. The cutting resistance($\textrm{p}_{1}$) increases as the depth of cut(d) increases at fixed feed rate(f) over the cutting speed(v) range of 43-226 m/min and p decreses about 18% average when V is increased for fixed d and f. At V= 226m/min, $\textrm{p}_{1}$/for A, C tips are about the same level but $\textrm{p}_{1}$ for B tip is 15% less than A, C tips. 2. The specific cutting resistance(Ks) at V=226 m/min was derived for A, B, C tips respectively and the value of Ks for B rip is about 20% less than A, C tips. 3. The surface roughness(Ra) improves significantly as the cutting speed(V) is increased and this effect was greater when V>100 m/min. On the other hand, Ra deteriorates as the feed rate(f) is increased and this trend was accelerated when f>0.3 mm/rev. With regard to the difference of Ra values among A, B, C tips, at V=226m/min, d=0.4mm, and f=0.31-0.61mm/rev, Ra values for B.C tips are about 17% less than tip A. 4. The experimental tool wear equations were derived for A, B, C tips and from these equations, the tool life($\textrm{T}_{\textrm{L}}$) baced on the I.S.O. criteria was calculated to be $\textrm{T}_{\textrm{L}}$<$\textrm{T}_{\textrm{LB}}$<$\textrm{T}_{\textrm{LC}}$ for both flank wear($\textrm{V}_{\textrm{B}}$) and boundary wear($\textrm{V}_{\textrm{N}}$). Hence, the coated tips are superior to the uncoated tip and tip C is considered to be the best. 5. The cutting resistance may be slightly reduced and the surface rounghness improved when the damper is used especially when V>100 m/min. Therefore this damping device is considered to be effective and practical. The experimental surface roughness equations were also derived. Based on the vibration test, it is established that the surface roughness improvement was the result of amplitude reduction made possible by the damper.

• Tunnel and Underground Space
• /
• v.29 no.5
• /
• pp.332-345
• /
• 2019

Maximum dip vector of individual joint plane, which can be uniquely defined on the hemispherical projection plane, has been established by considering its dip and dip direction. A new stereographic projection method for the rock slope analysis which employs the maximum dip vector can intuitively predict the failure modes of rock slope. Since the maximum dip vector is uniquely projected on the maximum dip point of the great circle, the sliding direction of discontinuity plane can be recognized directly. By utilizing the maximum dip vector of discontinuity both the plane sliding and toppling directions of corresponding blocks can be discerned intuitively. Especially, by allocating the area of high dip maximum dip vector which can form the flanks of sliding block the potentiality for the formation of virtual sliding block has been estimated. Also, the potentiality of forming the triangular-sectioned sliding block has been determined by considering the dip angle of joint plane the dip direction of which is nearly opposite to that of the slope face. Safety factors of the different-shaped blocks of triangular section has been estimated and compared to the safety factor of the most hazardous block of rectangular section. For the wedge analysis the direction of crossline of two intersecting joint planes, which has same attribute of the maximum dip vector, is used so that wedge failures zone can be superimposed on the stereographic projection surface in which plane and toppling failure areas are already lineated. In addition the maximum dip vector zone of wedge top face has been delineated to extract the wedge top face-forming joint planes the orientation of which provides the vital information for the analysis of mechanical behavior of wedge block.

• Journal of the Korean Geophysical Society
• /
• v.9 no.3
• /
• pp.189-197
• /
• 2006

The Korea Plateau is a continental fragment rifted and partially segmented from the Korean Peninsulaat the initial stage of the opening of the East Sea (Japan Sea). We interpreted marine seismic profiles from the South Korea Plateau in conjunction with swath bathymetric to investigate processes of con-tjnental rifting and separation of the southwestern Japan Arc. The SouU-i Korea Plateau preserves funda-mental elements of rift architecture comprising a seaward succession of a rift basin and an uplifted rift flank passing into the slope, typical of a passive continental margin. Two distinguished rift basins (Onnuri and Bandal Basins) in the South Korea Plateau are bounded by major synthetic and smaller antithetic faults, creating wide and symmetric profiles. The large-offset border fault zones of these basins have convex dip slopes and demonstrate a zig-zag arrangement along strike. Rifting was primarily controlled by normal faulting resulting from extension orthogonal to the inferred line of breakup along the base ofthe slope rather U-ian strike-slip deformation. Two extension direcdons for rifdng are recog-nized; U-ie Onnuri Basin was rifted in U-ie EW direction; U-ie Bandal Basin in U-ie EW and NW-SE directions, suggesting two rift stages. We interpret that the E-W direction represents initial rifting at the inner margin; while the Japan Basin widened, rifting propagated repeatedly from the Japan Basin to the southeast toward the Korean margin but could not penetrate the strong continental lithosphere of the Korean Shield and changed direction to the south, resulting in E-W extension to create the rift basins at the Korean margin. The Hupo Basin to the south of the Korea Plateau is estimated to have formed in this process. The NW-SE direction probably represents the direction of rifting orthogonal to the inferred line of breakup along the base of the slope of the South Korea Plateau; after breakup the southwestern Japan Arc separated in the SE direction, indicating a response to tensional tectonics associated with the subduction of the Pacific Plate in the NE direction. We suggest that structural evolution of the eastern Korean margin can be explained by the processes occurring at the passive continental margin.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.637-642
• /
• 2021

Kidney stones are largely classified into kidney stones, ureter stones, and urolithiasis depending on the location of their occurrence. Therefore, in this study, from January 2019 to June 2021, kidney stones found in 112 patients with flank pain or who visited for abdominal ultrasonography at a general hospital located in Daegu were diagnosed with urolithiasis. We wanted to investigate the effect on twinkling artifacts. As a result of the study, the incidence of twinkling artifacts due to kidney stones was relatively high in the longitudinal scan among the scan methods. As the number of kidney stones increased, the incidence of twinkling artifacts increased by 1.296 times (p<0.05). As the kidney stone size increased, the incidence of twinkling artifacts increased by 0.086-fold (p<0.05). It was found that the number and size of kidney stones are factors affecting twinkling artifacts. Since the effect of kidney stones on twinkling artifacts is related to the number and size of kidney stones, continuous attention should be paid to helping the detection of kidney stones by using variables affecting twinkling artifacts.

• The Journal of Internal Korean Medicine
• /
• v.40 no.4
• /
• pp.709-722
• /
• 2019

Objective: The purpose of this study was to report the effect of traditional Korean medicine (TKM) in alleviating the side effects of lung cancer patient undergoing immunotherapy. Method: A 43-year-old man, who was diagnosed with non-small cell lung cancer, received pembrolizumab treatments. The patient was treated with acupuncture and herbal medicine (Geoeoyangpye-tang) to control various uncomfortable symptoms. The degree of pain was measured by the numeric rating scale (NRS). The European Organization for Research and Treatment of Cancer Quality of Life Questionnaire, Core 30 (EORTC QLQ-C30) and the EORTC 13-item lung cancer-specific module (EORTC LC-13 questionnaire) were used to assess the change in the quality of life. Results: After the TKM treatment, the flank pain and arthralgia based on the NRS were significantly improved. Various uncomfortable symptoms such as fatigue, dyspnea, insomnia, and loss of appetite were also significantly improved, based on the EORTC QLQ-C30 and EORTC QLQ-LC13. The size of the primary tumor was decreased during treatment. The disease status was stable radiologically after two months from discharge.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.253-258
• /
• 2019

The gilt bronze statue, Seated Avalokiteshvara with a Thousand Hands, of the Goryeo dynasty, is the only one in Korea of its kind that has undergone a conservation process for the special exhibition entitled GORYEO: The Glory of Korea. For the conservation treatment, first, a component analysis (XRF) was conducted, and a manufacturing technique (CT) was analyzed. The results of the investigation revealed that the statue was alloyed with Cu, Sn, and Pb ternary bronze. Its surface, except for the detached plating layers, was originally plated using the mercury amalgam method. This statue was assembled after separately casting each part of the body, such as the left and right arms and the wrists, including the hands, with objects. In particular, each wrist was cast and fitted with a metal nail to express each object in the hands more precisely. Inside the statue, there were five iron cores: two for the head, one for the left elbow, one for the right flank, and one for the right waist. For the preservative treatment, natural adhesive agents, including vegetable gelatin and glue (20%), were mixed with alcohol to protect the base metal and adhere to the plating layers. Using synthetic resin (CDK 520+SN-sheet) for the damaged parts, the restored parts could be attached and detached to/from the statue. Eventually, the compositional analysis and conservation treatment left the statue in a stable condition and ready for exhibitions and future studies.

• Journal of Ginseng Research
• /
• v.45 no.1
• /
• pp.126-133
• /
• 2021

Background: 20(S)-protopanaxadiol (20(S)-PPD), one of the aglycone derivatives of major ginsenosides, has been shown to have an anticancer activity toward a variety of cancers. This study was initiated with an attempt to evaluate its anti-cancer activity toward human endometrial cancer by cell and xenograft mouse models. Methods: Human endometrial cancer (HEC)-1A cells were incubated with different 20(S)-PPD concentrations. 20(S)-PPD cytotoxicity was evaluated using MTT assay. Apoptosis was detected using the annexin V binding assay and cell cycle analysis. Cleaved poly (ADP-ribose) polymerase (PARP) and activated caspase-9 were assessed using western blotting. HEC-1A cell tumor xenografts in athymic mice were generated by inoculating HEC-1A cells into the flank of BALB/c female mice and explored to validate 20(S)-PPD anti-endometrial cancer toxicity. Results: 20(S)-PPD inhibited HEC-1A cell proliferation in a dose-dependent manner with an IC50 value of 3.5 μM at 24 h. HEC-1A cells morphologically changed after 20(S)-PPD treatment, bearing resemblance to Taxol-treated cells. Annexin V-positive cell percentages were 0%, 10.8%, and 58.1% in HEC-1A cells when treated with 0, 2.5, and 5 μM of 20(S)-PPD, respectively, for 24 h. 20(S)-PPD subcutaneously injected into the HEC-1A cell xenograft-bearing mice three times a week for 17 days manifested tumor growth inhibition by as much as 18% at a dose of 80 mg/kg, which sharply contrasted to controls that showed an approximately 2.4-fold tumor volume increase. These events paralleled caspase-9 activation and PARP cleavage. Conclusion: 20(S)-PPD inhibits endometrial cancer cell proliferation by inducing cell death via a caspase-mediated apoptosis pathway. Therefore, the 20(S)-PPD-like ginsenosides are endowed with ample structural information that could be utilized to develop other ginsenoside-based anticancer agents.