• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.9-13
• /
• 1999

In order to investigate the effect of flange wrinkling on the wall break of a deep drawn rectangular cup, experiments and simulation were done. The effect of the wrinkling height on drawing force and wall break for a moving blank holder system with spacer were studied by setting a fixed clearance between the drawing die and the blank holder. Simulation and experimental results showed that wall break could be provoked by the flange wrinkling. As the wrinkling height increased, the punch force grew. The maximum punch force was obtained at its final stage of stroke.

• 한국지진공학회논문집
• /
• 제22권2호
• /
• pp.55-62
• /
• 2018

In this study, natural period formular is presented for a RC shear wall structure with H-, T-, and L-shaped wall sections. The natural period formular proposed by Goel and Chopra and adopted in ASCE 7-10 was modified by using the ratio of the flange and web wall area. The natural periods of structures with H-shaped wall were numerically obtained, the results indicated that the ASCE 7-10 could not consider the natural period variation according to the length of the flange wall, but the proposed formula could do. Especially, ASCE 7-10 estimated much longer periods than eigenvalue analysis, and this implies that conservative seismic design is difficult. The periods by eigenvalue analysis exist between the upper and lower bounds given by the proposed formula, and conservative design is possible by using the proposed lower bound value. In order to verity the effectiveness of the proposed method, actual residential buildings with various types of flange walls are considered. Ambient vibration tests, eigenvalue analyses, and nonlinear dynamic analyses were conducted and the periods were compared with the values by ASCE 7-10 and the proposed formula. The results showed that the proposed formula could estimate more accurately the periods than ASCE 7-10.

• 콘크리트학회논문집
• /
• 제14권5호
• /
• pp.796-803
• /
• 2002

T형 벽체는 웨브 벽체와 평행한 방향으로 횡력이 작용할 때 그 작용 방향에 따라 다른 강성과 강도를 갖는다. 특히, 플랜지벽체에 인장력이 작용할 때 플랜지 벽체내 철근의 기여로 인하여 벽체의 휨강도가 상승하게 되는데 이것은 전단지체 현상에 기인한 것이다. 이러한 전단지체 현상에 따라 플랜지 벽체는 전체 폭이 웨브 벽체와 일체로 거동하지 못하고, 일정한 부분만이 웨브 벽체와 함께 거동하게 되는데, 이러한 범위를 유효 폭이라 하며, 이러한 유효 폭은 구조물의 실제적인 강도와 강성을 예측하는데 중요한 역할을 하게되므로 반드시 구명되어야 할 요소라 할 수 있다. 이에 본 연구에서는 실험을 통하여 웨브 벽체 단부에 기존의 양단부 보강상세를 갖는 T형 벽체의 실제적인 강도와 유효 폭을 평가하고자 한다. 연구목적을 달성하기 위하여 3개의 실험체를 제작하였으며 0.1 $f_{ck}$ . $A_{g}$의 축력을 실험이 진행되는 동안 일정하게 유지하면서, 반복가력 실험을 수행하였다. 실험결과, 유효 폭은 횡변위의 증가에 따라 증가하는 것으로 나타났으며 최대강도 발현시 h/3에 해당하는 전체 플랜지가 유효 폭으로 작용하는 것으로 나타났다. 그러므로, PCI나 국내 기준에 의한 h/10의 유효 폭은 웨브 벽체 단부에 주어진 보강상세를 갖는 벽체에 대하여 적절치 못한 것으로 사료된다..

• 풍력에너지저널
• /
• 제15권2호
• /
• pp.37-44
• /
• 2024

In this study, a tensile test and FE analysis were conducted on a bolt-connected L-shaped flange to evaluate its behavior and load resistance. A total of five specimens were manufactured using the inner and outer distances and bolt diameters of the L-type flange as experimental variables. As a result of the tensile test of the L-shaped flange, as the internal and external length ratio (b/a) increased, the maximum load decreased and the maximum displacement increased. As the diameter (d) of the bolt increased, the maximum load and the deformation of the wall increased. The shapes of the destruction specimens showed two forms of destruction: one due to the fall of the nut and the surrender of the bolt as the thread of the bolt and nut was worn out, followed by the surrender of the wall. As a result of FE analysis, it was found that elasto-plastic model (EPM) analysis similarly tracks the behavior of the tensile test results.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 압출 및 인발 심포지엄
• /
• pp.20-23
• /
• 1999

The current three-stage cold extrusion process including upsetting to produce a flange is investigated for the purpose of improvement of manufacturing process. The main goal of this study is to obtain an appropriate process sequence which can produce the required part most economically without overloading of tools and select an appropriate process for reducing manufacturing cost. The current process sequence is simulated and design criteria are examined. Based on the results of simulation of the current three-stage process, a design strategy for improving the process sequence is developed using the thick-wall pipes. Based on the results of simulation of the one-stage processes, the forming processes of a flange for improving the conventional process are proposed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.727-732
• /
• 2000

Four 1/2-scale wall specimens with flange are tested. The purpose of this study is to investigate experimentally structural behavior of flanged walls in wall slab system apartment buildings considering effective width of flange wall. Main variables are the length of web wall and concrete strength. Cyclic lateral loads are applied at the top of the walls. A constant axial load of approximately $0.1f_{ck}\cdotA_g$ is maintained during the testing. Test result shows that the capacity of the wall was governed by aspect ratios rather than concrete strengths and that initial stiffness and strength of specimens is increased with increasing the stiffness of web wall.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.521-526
• /
• 2002

The seismic performance of structural walls subjected to the cyclic lateral loads are influenced by various factors, like sectional shape, aspect ratio, reinforcement ratio, arrangement of reinforcement, and axial load ratio etc. In this research, reinforced concrete structural walls with the T-shaped cross section were selected. The seismic performance of T-shaped wall was affected by the many (actors because T-shaped wall is irregular wall composed to two rectangular walls. Especially the seismic performance of T-shaped wall varies with the flange condition and the various factors including the flange condition were determined. Therefore, the objective of this study is to understand the factors to improve seismic performance of RC T-shaded tv using sectional analysis.

• 한국지반공학회논문집
• /
• 제29권11호
• /
• pp.129-138
• /
• 2013

산업화의 발달과 더불어, 도로 등 교통시설과 건설 장비의 발달로 공장 제작하여 운반 설치하는 프리캐스트 구조물이 급속히 확장되는 추세이며, 2000년 대 부터는 철근콘크리트 옹벽도 프리캐스트 공법이 개발되고 현장에서 적용이 확대되고 있는 추세이다. 본 연구에서는 기존에 항타하여 설치해 온 앵커 파일 옹벽에서 기초에 설치되는 앵커파일을 일반돌기에서 나선형 플렌지 타입으로 설치하여 유압모터를 이용한 압입, 회전 방식으로 설치하고 앵커파일의 형태를 개선하고 이에 따른 기술적 검증과 최적의 적용형태를 도출하였다. 이를 위하여 현장 실규모 시험 및 수치해석적 검증을 수행하였으며, 인발실험 결과 앵커파일은 나선형 플렌지를 설치하는 것이 돌기가 없거나 다른 형상의 돌기가 설치된 파일에 비해 1.5~8배의 높은 인발 저항력을 보였으며, 나선형 플렌지가 설치된 APC옹벽에서 인발 저항력의 증대로 기초와 벽체의 변위도 25% 이상 감소됨을 보였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.329-332
• /
• 2006

To study the effect of the macroscopic TVLEM(Three Vertical Line Element Model) which is developed in 2D, a bearing wall system is selected and 2D and 3D pushover analyses are carried out. In 2D model, the participating width of a flage wall to lateral resistance is modelled based on Paulay's effective width. From the comparisons of roof displacements, 2D model which uses the effective width of flange wall has better prediction and less analysis time than 3D model which has intrinsically the full width of the flange that causes higher stiffness and strength and shorter deformation capacity than 2D model.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.437-440
• /
• 1999

A numerical study is preformed to investigate behavioral characteristics of T-shaped RC wall that is frequently used for the wall-slab structure system. This study provides design methods to address shear lag and to prevent early failure due to cracking and crushing.