• 제목/요약/키워드: Flaming

검색결과 65건 처리시간 0.028초

등속공급 튜브연소로를 이용한 각 연소조건에서의 연기입자 형상 분석 (Studies on the Morphology of Smoke Particles for Each Type of Fire by Using Steady State Tube Furnace)

  • 구재학
    • 한국화재소방학회논문지
    • /
    • 제28권1호
    • /
    • pp.44-51
    • /
    • 2014
  • 화재현장에서 발생하는 연기는 일반적으로 연소가스와 더불어 여러 가지 성분의 유기증기 및 미연탄소로부터 생성된 미세입자로 되어 있다. 연기는 호흡기로 흡입되어 장단기 인체피해를 유발한다. 화재 시 발생하는 유독가스나 입자에 의한 피해를 예측하기 위해서는 연기입자의 호흡기관 내 이송과 침전, 그리고 입자를 매개로 한 유독가스의 흡수와 흡착등의 현상 파악이 필수적이며 이에 연기입자의 크기 및 형상은 이와 같은 현상의 변화에 중요한 변수로서 작용한다. 이 연구에서는 화재 시 발생하는 연기입자의 흡입에 의한 인체피해 특성을 예측하기 위하여 가연물 및 화재 조건에 따른 연기입자의 크기 및 형상에 대한 분석을 수행하였다. 국제표준에 따른 연소생성물 분석을 위하여 ISO/TS 19700 기준에 따라서 등속연소로를 제작하고 각 가연물에 대하여 연소로 온도 및 당량비 조건으로 정해지는 4가지 대표적인 화재조건, 즉, 저온불완전연소, 완전불꽃연소, 불완전불꽃연소, 고온불완전연소 조건에서 연기입자를 발생시켰다. 발생된 연기입자는 다단 충돌집진기를 이용하여 채집한 다음 투과전자현미경으로 크기 및 형상을 분석하였다.

표면의 대류열전달계수, 방사율 및 화염 열유속 역해석 연구 (Inverse Estimation of Convective Heat Transfer Coefficient, Emissivity and Flame Heat Flux on the Surface)

  • 윤경범;박원희
    • 한국화재소방학회논문지
    • /
    • 제27권6호
    • /
    • pp.15-20
    • /
    • 2013
  • 반발 입자 군집 최적화 알고리즘을 이용하여 시편 표면에서의 대류열전달 계수, 방사율 및 화염에 의한 열유속을 예측하였다. 콘 칼로리미터를 이용하여 여러 열유속 조건 하에서의 방무목 시편의 표면 온도와 질량감소율 및 발화시간을 측정하였다. 본 연구에서 최적화된 대류열전달계수, 방사율 및 화염에 의한 열유속을 이용하여 계산된 표면온도는 실험결과와 각 열유속에 대하여 평균오차가 2% 내로 잘 일치하였다. 본 연구에서 제시한 방법을 이용하여 실험적 방법으로 직접 측정하기 매우 어려운 화염이 발생하는 표면에서 열전달과 관련된 여러 물리량을 구할 수 있다.

UV 화염감지기의 감지성능에 대한 분진분위기의 영향 (Influence of Dust Environment on the Detection Capability of Ultraviolet Flame Detector)

  • 김홍;호예
    • 한국가스학회지
    • /
    • 제1권1호
    • /
    • pp.113-119
    • /
    • 1997
  • UV 화염감기의 분진분위기에서의 성능저하를 고찰하기 위하여 세제분말, 탄진 및 분말 소화약제의 분진운을 형성하였고 LPG 및 가솔린 화염을 사용하여 UV 화염감지기의 감지성능을 고찰하였다. 분진 분위기 하에서의 UV 화염감지기의 성능을 분진의 농도와 분진층의 거리가 증가함에 따라 뚜렷한 증가를 보였으며, 분진의 화학적, 물리적 특성에 커다란 영향을 받았다. 따라서 UV 화염감지기를 분진 분위기에서 사용한 경우 특별한 주의를 기울일 필요가 있는 것으로 사려된다.

  • PDF

Multi-cavity Piston에 의한 디젤기관의 연소성 향상에 관한 연구 (The Study for Improving the Combustion in a D.I. Diesel Engine using Multi-cavity Piston)

  • 박철환;방중철
    • 한국연소학회지
    • /
    • 제20권3호
    • /
    • pp.13-20
    • /
    • 2015
  • The performance of a direct-injection diesel engine often depends on the strength of swirl or squish, the shape of combustion chamber, the number of nozzle holes, etc. This is natural because the combustion in the cylinder was affected by the mixture formation process. Since the available duration to make the mixture formation of air-fuel is very short, it is difficult to make complete mixture. Therefore, an early stage of combustion is violent, which leads to the weakness of noise and vibration. In this paper, the combustion process of a common-rail diesel engine was studied by employing two kinds of pistons. One has several cavities on the piston crown to intensify the squish during the compression stroke in order to improve the atomization of fuel, we call this multi cavity piston in this paper. The other is a toroidal single cavity piston, generally used in high speed diesel engines. To take photographs of flame and flaming duration, a four-stroke diesel engine was remodeled into a two-stroke visible single cylinder engine and a high speed video camera was used.

소양(瘙痒)의 병인.병기(病因.病機)에 대한 연구 (Study about the Cause and Mechanism of the Itching)

  • 박승림;강정수
    • 혜화의학회지
    • /
    • 제22권1호
    • /
    • pp.11-21
    • /
    • 2013
  • After studying the cause and mechanism of the itching with the perspective of chronic medical books including Neijing, and the annotators, the conclusions are as follows. 1. The itching, which has correlation with the heart, is the deficiency symptom(虛症). It is generated when the lung-metal(肺金) is infected by the fire pathogen(火邪) and developed to depression(鬱), because of the heart fire flaming upward of circuit year(歲火太過). The treatment is to make metal depression scatter(金鬱泄之). 2. The itching occurs between the dermis(膚) and the epidermis(皮). 3. The itching generates when the excess of yang exuberance(熱盛極) precede the transmission of the wind-heats(風熱), the wind-cold(風寒), and the wind-dampness(風濕). It causes the blood deficiency(血虛) and the blood stasis(血瘀) because of the skin dryness. 4. The itching usually generates during summer, causes the body fever(身熱) and the dermis pain(膚痛). When it becomes worse, it causes generalized itching and vesicles at the whole body(浸淫). 5. The itching is related to the spirit(魄), which works in unconsciousness and the movement of defense qi(衛氣) in night.

산소지수거에 의한 라왕소재(素材)와 목질판상재료(木質板狀材料)의 연소특성(撚燒特性)에 관한 예비연구 (Preliminary Studies on Combustion Properties of Lauan Solid Wood and Some Wood-Based Materials by Oxygen Index Method)

  • 이필우;김현중;엄영근
    • Journal of the Korean Wood Science and Technology
    • /
    • 제17권4호
    • /
    • pp.77-82
    • /
    • 1989
  • In this study the oxygen index method was used to compare the duration of flaming and the rate of weight loss at the level of 6 and 9mm panel thicknesses among solid wood, plywood, particleboard, and medium density fiberboard. The obtained results were as follows: 1. In 9mm-thick panels, the combustibility was the largest in lauan solid wood followed by medium density fiberboard. particleboard. and plywood. 2. Medium density fiberboard was burned more easily than plywood in 6mm-thick panels and the higher oxygen concentration was needed as the panel thickness increased. 3. The oxygen indices of 9mm-thick panels were 29.0 in lauan solid wood, 31.4 in medium density fiberboard, 33.0 in particleboard, and 33.4 in plywood and those of 6mm-thick panels were 28.3 in medium density fiberboard and 29.7 in plywood. 4. The rate of weight loss was the largest in lauan solid wood followed by medium density fiberboard, plywood, and particleboard.

  • PDF

內障, 綠風內障, 靑風內障에 대한 文獻的 考察 (A literatual studies on the cataract, glaucoma, bluish glaucoma)

  • 박세봉;고우신
    • 한방안이비인후피부과학회지
    • /
    • 제12권1호
    • /
    • pp.254-267
    • /
    • 1999
  • Based on the research of cataract, glaucoma, bluish glaucoma, we have abtained the following results. 1. Main etiologies of the cataract are deficiency of the liver and kidneys, main symptoms are no nebula, no pain, no tear and sometimes light blue and white vision appear. 2. Main etiologies of glaucoma are receives heat from the liver, stagnation of the liver and gall bladder etc, main symptoms are both forehead corner pull each ether, pain from eye ball to nasal septum, headache, extending pain of the eyes, sometimes red and white flower vision appear, etc. 3. main etiologies of the bluish glaucoma are melancholy, wrath, stagnation of the liver, internal damage, flaming up fire of the phlegm, deficiency of the liver, deficiency of blood, etc, main symptoms are numbness, visual field constriction, blindness, reduce of visual capacity, blue flower vision sometimes appear, etc. 4. Treatments are mainly uses nourish Um(陰) to reduce pathogenic fire, relieve stagnancy of Ki(氣) of the liver, nourish Um(陰) of the liver and kidneys, etc, acupuncture points are mostly contended arounded eyes such as BL10)(天柱), GV16(風府), LR3)(太衝), HT5)(通里) and in the case of nauses and vomitting PC6)(內關, ST36)(足三里) are included in addition to the above.

  • PDF

UPWARD FLAME SPREAD ON PRACTICAL WALL MATERIALS

  • Kim, Choong-Ik;Ellen G. Brehob;Anil K. Kulkarni
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
    • /
    • pp.138-145
    • /
    • 1997
  • Models of upward flame spread have been attempted in the past, but in the current work an emphasis has been placed on developing a practical model that will be useful across a broad range of materials. Some of the important aspects of the model we: the addition of external radiation to simulate a wall that is a part of an enclosure fire and has flaming walls radiating to it, the use of a correlation for flame heat feedback distribution to the sample surface based on data available in the literature, and the use of an experimentally measured mass loss rate for the sample material, In this paper, the development of the numerical model is presented along with predictions of flame spread for three materials: hardboard, a relatively homogeneous wood-based material; plywood, which is made of laminated wood bonded by adhesives; and a composite material made of fiberglass matrix embedded in epoxy. Predictions are compared with measured data at several levels of external radiation for each material. For the materials tested, the model correctly predicts trends and does a reasonable job predicting flame heights. The need for thermal property data for practical materials, which would be appropriate for flame spread models, is indicated by this work.

  • PDF

플라이애시와 폐유리분말을 사용한 외단열용 마감모르타르의 고온 특성 (High Temperature Properties in Finishing Mortars of Exterior Insulation Finishing System Using Fly Ash and Waste Glass Powder)

  • 송훈;신현욱
    • 자원리싸이클링
    • /
    • 제28권6호
    • /
    • pp.64-72
    • /
    • 2019
  • 플라이애시는 발전소의 탄종 및 품질에 따라 화학조성이 다르고 품질 변화가 크며 탄소함량과 입경에 따라 분류하며, 폐유리분말은 파유리를 분쇄하여 제조하고 분쇄정도에 따라 분류한다. 건축물의 외단열 공법은 경제적이면서 단열성능이 우수한 폴리스티렌 폼 단열재를 활용한 공법이 일반적이다. 하지만 유기계 단열재는 단열성능이 우수하나 화재에 취약하고 다수의 문제점이 지적되었다. 본 연구에서는 플라이애시와 폐유리분말을 사용하여 고온에서 안정한 외단열용 마감모르타르를 제작하고 고온 강도 및 난연 특성을 검토하였다. 실험 결과, 플라이애시와 폐유리분말을 이용한 마감모르타르는 고온에서의 안전성이 높았다. 하지만 강도감소의 폭이 크므로 적절한 배합조건의 선정이 필요하다.

열과 연기농도를 입력변수로 갖는 퍼지로직을 이용한 화재감지시스템 (A Fire Detection System Using Fuzzy Logic with Input Variables of Temperature and Smoke Density)

  • 홍성호;김두현;김상철
    • 한국화재소방학회논문지
    • /
    • 제18권4호
    • /
    • pp.42-51
    • /
    • 2004
  • 본 논문은 열과 연기농도를 입력변수로 갖는 퍼지로직을 적용한 화재감지시스템을 제시한 연구이다. 본 논문에서 제시한 화재감지시스템은 열과 연기농도를 입력신호로 받아들이고 이를 통하여 화재가능성이 추론되는 퍼지추론시스템을 포함하고 있다. 이 추론시스템의 조건부(antecedent part)는 fuzzy 단일 값(singleton)으로 열과 연기농도가 입력되도록 하였고, 결론부(conclusion part)는 화재가능성으로 적용하였다. 또한 퍼지추론을 위하여 적용된 membership함수는 삼각형 membership함수이다 추론하는 방법은 Mamdani가 제안한 minimum 연산을 사용하였다. 그리고 이러한 계산을 위하여 Matlab 프로그램을 사용하였고 이 프로그램을 이용하여 GUI(graphic user interface)기반의 화재감지프로그램을 개발하였다. 이와 같은 퍼지로직이 적용된 화재감지시스템의 신뢰성을 검증하기 위하여 불꽃화재와 훈소화재에 대한 실험을 통하여 추론되는 화재가능성을 분석하였다. 그 결과 본 연구의 퍼지로직을 적용한 화재감지시스템은 연소상황에 따라 비교적 정확하게 화재가능성을 추론하였다.