• Environmental Engineering Research
• /
• 제9권6호
• /
• pp.256-268
• /
• 2004

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.612-616
• /
• 2017

비예혼합합화염과 예혼합화염의 화염응답특성을 속도섭동을 다양하게 변경하며 실험하였다. 연료로는 수소($H_2$)/메탄($CH_4$)을 50/50 %로 혼합한 혼합연료를 사용하였으며 산화제로는 공기를 사용하였다. OH 자발광(OH fluorescence)을 이용하여 화염이미지를 계측하였으며 PMT(Photo Multiplier Tube)를 이용하여 열 방출량을 계측하였다. 계측된 이미지는 MatLab 코드를 이용하여 수치화하였다. 예혼합화염의 결과에서는 진폭이 증가할수록 화염섭동이 증가하는 경향성을 보았으며 진폭에 따라서 화염전달 함수의 게인 값이 선형적인 거동을 하는 것을 관찰하였다. 비예혼합화염의 화염길이는 진폭이 증가할수록 짧아지는 것을 관찰하였고 게인 값은 진폭에 비선형적인 거동을 하는 것을 확인하였다.

• 한국화재소방학회논문지
• /
• 제7권1호
• /
• pp.5-10
• /
• 1993

Flame spreading over liquid fuel surface has been investigated using thermocouple and schlieren photograph. Without forced convection, it was clearly found that the flame spreading is mainly controlled by surface flow which is maybe generated by change of surface tension. Furthermore, the radiative heat transfer is dominant over a conductive heat transfer in kerosene. But the latter was found more influential than the former in diesel. Oscillation of flame spreading was found. It maybe cause of surface flow.

• 한국연소학회지
• /
• 제13권4호
• /
• pp.16-25
• /
• 2008

Experiments have been conducted to clarify impacts of curtain flow and velocity ratio on low strain rate flame extinction, and to further display transition of shrinking flame disk to flame-hole. Critical mole fractions at flame extinction are examined in terms of velocity ratio, global strain rate, and nitrogen curtain flow rate. It is shown that multi-dimensional effects at low strain rate flames through global strain rate, velocity ratio, and curtain flowrate dominantly contribute to flame extinction and transition of shrinking flame disk to flame hole. Our concerns are particularly focused on the dynamic behavior of an edge flame in shrinking flame disk.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.73-78
• /
• 2006

The lifted oscillating flame has been studied using experiments of inverse diffusion flames that the air jet injected into a methane background. To find out the characteristics of inverse diffusion flames, fundamentally flame stabilized diagram is investigated with various air and fuel jet velocities. It has five regions - flame extinction, stable attached flame, anchored flame, liftoff flame and blow off region. In inverse diffusion flame, lifted flames were observed near the blow off region. As long as flames lift off, flames oscillate by periods. In this oscillating lifted flame region, the frequency of 1 and under were observed in various air and methane jet velocities. Characteristics of lifted flames are also examined by using the ICCD direct image. And intensity of flame chemiluminescence is very different in rising and falling period from photographs. For the present, it is predicted that the changes of flame structure are related with flame oscillation, but more experiments will be needed to make clear the phenomenon.

• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1582-1590
• /
• 1998

Combustion-driven oscillations in a surface burner have been investigated to clarify their characteristics. A model combustor is made and the oscillation frequencies are measured for various dimensions of the combustor. It is found that there are two modes of oscillations; one is the 'acoustic mode' at high frequencies, associated with the acoustic mode of the combustion system and the other is the 'combustion mode' at low frequencies around 100 Hz, associated with the instability of the flame. Acoustic mode is excited when the surface burner is placed where the phase of particle velocity leads that of acoustic pressure by $90^{\circ}$, for all the combustion conditions. Combustion mode is driven at high combustion rate by the lift of unstable flame near the lower limit of the combustible equivalence ratio. Combustion mode is greatly influenced by the inlet temperature of the premixed gas. When the inlet temperature is very high, the combustion mode does not occur.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.53-54
• /
• 2012

In an IGCC plant, one of the most important issues on fuel flexibility in the lean premixed combustor is combustion instabilities. They are characterized by large amplitude pressure oscillations which are caused by unsteady heat release from the flames. The relationship between the unsteady heat release and flow oscillation can be qualitatively and quantitatively explained by flame transfer function. This paper introduces combustion instability modeling methods based on the flame transfer function approach.

• 대한기계학회논문집B
• /
• 제36권2호
• /
• pp.181-188
• /
• 2012

대향류확산화염의 화염소화에 있어서 에지화염 역할에 관한 실험적 연구가 진행되었다. 속도비, 버너직경, 그리고 버너간격을 변화시키며 수행된 실험에서 전체신장률에 따른 화염소화 임계질소몰분율의 그래프는 c-커브 형태로 나타났다. 고신장률화염에서는 화염소화 임계질소몰분율의 그래프가 하나의 곡선으로 일치하였으며, 화염이 일차원의 응답특성을 갖는 것을 확인하였다. 화염 소화는 바깥 에지화염이 반경방향으로의 진동 후에 화염 중심으로 수축하며 소화하는 영역, 진동 없이 화염중심으로 수축하며 소화하는 영역, 그리고 바깥 에지부분의 수축과 진동 없이 화염중심에 화염 구멍이 생기며 소화하는 영역으로 세 가지 모드로 나타났다. 화염 표면온도 측정과 에너지 방정식의 각항을 수치해석 한 결과를 토대로 에지화염부분에서의 반경방향 전도 열손실이 에지화염의 불안정을 야기한다는 것과 전도를 통한 열 공급뿐만 아니라 대류를 통한 열 공급도 바깥 에지화염의 안정화에 기여한다는 것을 보였다. 그리고 반경방향의 전도열손실이 수축하며 소화하는 메커니즘의 지배적인 역할을 함을 보였다.

• 한국연소학회지
• /
• 제15권1호
• /
• pp.12-21
• /
• 2010

The main objective of this study was investigation of combustion instability characteristics in a lean partially premixed gas turbine dump combustor. Dynamic pressure transducers were located on combustor and inlet section to observe combustion pressure oscillation and difference at each measurement places. Also flame shape and $CH^*$ chemiluminescence were measured using a high speed ICCD camera. The combustor length was varied in order to have different acoustic characteristics from 800 to 1090 mm. The first section of this paper shows the stability map in model gas turbine combustor. And the effects of combustor length, mixture velocity in the mixing section and equivalence ratio were studied by the pressure perturbation and heat release oscillation. Also, the instability frequency and mode analysis were studied in last two sections. We observed two dominant instability frequencies in this study. Lower frequencies were obtained at lower equivalence ratio region and it was associated with a fundamental longitudinal mode of combustor length. Higher frequencies were observed in higher equivalence ratio conditions. It was related to secondary longitudinal mode of combustor and mixing section. In this instability characteristics, pressure oscillation of mixing section part was larger than pressure oscillation of combustor. As a result, combustion instability was strongly affected by acoustic characteristics of combustor and mixing section geometry.

• 대한기계학회논문집B
• /
• 제32권5호
• /
• pp.342-350
• /
• 2008

The effects of combustion instability on flow structure and flame dynamics with the inlet configurations in a model gas turbine combustor were investigated using large eddy simulation (LES). A G-equation flamelet model was employed to simulate the unsteady flame behaviors. As a result of mean flow field, the change of divergent half angle($\alpha$) at combustor inlet results in variations in the size and shape of the central toroidal recirculation (CTRZ) as well as the flame length by changing corner recirculation zone (CRZ). The case of ${\alpha}=45^{\circ}$ show smaller size and upstream location of CTRZ than those of $90^{\circ}$ and $30^{\circ}$ by the development of higher swirl velocity. The flame length in the case of ${\alpha}=45^{\circ}$ is shorter than other cases, while the case of ${\alpha}=30^{\circ}$ yields the longest flame length due to the decrease of effective reactive area with the absence of CRZ. Through the analysis of pressure fluctuation, it was identified that the case of ${\alpha}=45^{\circ}$ shows the largest damping effect of pressure oscillation in all configurations and brings in the noise reduction of 2.97dB, compared to that of ${\alpha}=30^{\circ}$ having the largest pressure oscillation. These reasons were discussed in detail through the analysis of unsteady phenomena related to recirculation zone and flame surface. Finally the effects of flame-acoustic interaction were evaluated using local Rayleigh parameter.