• 제목/요약/키워드: Flame length

검색결과 328건 처리시간 0.03초

폭발챔버에서 전파하는 화염의 국부 거동 (Local Behaviour of Propagating Flames in an Explosion Chamber)

  • 박달재;이영순
    • 한국안전학회지
    • /
    • 제26권2호
    • /
    • pp.32-35
    • /
    • 2011
  • 다중 장애물을 가지는 폭발챔버에서 전파하는 화염과 국부 장애물의 상관관계를 조사하기 위하여 실험적 연구를 수행하였다. 폭발챔버 높이 235 mm, 단면적 $1,000{\times}950\;mm^2$, 벤트면적 $1,000{\times}320\;mm^2$를 가지는 폭발챔버를 제작하였으며, 30% blockage ratio를 가지는 장애물을 챔버내에 설치하였다. 전파하는 화염과 장애물의 상관관계를 조사하기 위해 고속카메리를 사용하였다. 고속카메라로 얻어진 화염 이미지로부터 장애물 주위의 국부 화염전파 거동은 2가지 다른 방법, 즉 전파하는 화염전면(flame front)의 각 pixel point에서 산정된 평균 화염전파속도와 연소면적 증가(incremental burnt area)/화염전면 길이(flame front length) 관점에서 분석하였다. 분석결과, 2가지 방법으로 얻은 결과는 거의 일치하는 경향을 나타났으며, 전파하는 화염이 장애물의 전면과 상호 작용할 때 화염속도는 급격히 증가하다가 장애물의 후단면에서 약간 감소하고, 화염이 장애물 후단에서 재결합될 때 다시 급격히 증가하였다.

전단동축형인젝터를 통해 분사된 메탄-산소 이원추진제의 연소특성 (Combustion Characteristics of the Methane-Oxygen Bipropellant Injected by a Shear-coaxial Injector)

  • 홍준열;배성훈;배대석;김정수
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2017년도 제48회 춘계학술대회논문집
    • /
    • pp.787-790
    • /
    • 2017
  • 본 연구는 이원추진제 추력기(thruster)에 사용되는 메탄-산소 연소특성규명의 선행연구로서 모델연소실 내 전단동축형인젝터를 통해 분사된 기체메탄-기체산소 비예혼합화염의 연소안정한계 및 화염형상을 도출하기 위한 실험적 연구가 수행되었다. DSLR 카메라를 이용하여 화염 직접이미지(direct image)를 촬영하였고, 이미지 후처리(post-processing)를 통해 연소특성파악 및 화염길이 정량화를 수행하였다. 그 결과, 산화제 레이놀즈 수($Re_o$)가 증가함에 따라 이론반응비(stoichiometric ratio)에서 안정된 화염이 발생하였고, 동일 인젝터직경 조건에서 난류화염의 길이가 늘어남을 확인하였다.

  • PDF

음향 가진된 층류 비예혼합 분류 화염에서 거대 와류 거동에 관한 가시화 연구 (A Visual Investigation of Coherent Structure Behaviour Under Tone-Excited Laminar Non-Premixed Jet Flame)

  • 이기만;오세기;박정
    • 대한기계학회논문집B
    • /
    • 제27권3호
    • /
    • pp.275-285
    • /
    • 2003
  • A visualization study on the effect of forcing amplitude in tone-excited jet diffusion flames has been conducted. Visualization techniques are employed using optical schemes. which are a light scattering photography. Flame stability curve is attained according to Reynolds number and forcing amplitude at a fuel tube resonant frequency. Flame behavior is globally grouped into two from attached flame to blown-out flame according to forcing amplitude: one sticks the tradition flame behavior which has been observed in general jet diffusion flames and the other shows a variety of flame modes such as the flame of a feeble forcing amplitude where traditionally well-organized vortex motion evolves, a fat flame. an elongated flame. and an in-burning flame. Particular attention is focused on an elongation flame. which is associated with a turnabout phenomenon of vortex motion and on a reversal of the direction of vortex roll-up. It is found that the flame length with forcing amplitude is the direct outcome of the evolution process of the formed inner flow structure. Especially the negative part of the acoustic cycle under the influence of a strong negative pressure gradient causes the shapes of the fuel stem and fuel branch part and even the direction of vortex roll-up to dramatically change.

저신장율 대향류확산화염에서 에지화염 불안정성에 관한 열손실 효과 (Effects of Heat Losses on Edge-flame Instabilities in Low Strain Rate Counterflow Diffusion Flames)

  • 박준성;황동진;김정수;길상인;김태권;박정
    • 대한기계학회논문집B
    • /
    • 제30권10호
    • /
    • pp.996-1002
    • /
    • 2006
  • Experiments in methane-air low strain rate counterflow diffusion flames diluted with nitrogen have been conducted to study the behavior of flame extinction and edge flame oscillation in which flame length is less than the burner diameter and thus lateral conduction heat loss in addition to radiative heat loss could be remarkable at low global strain rates. Critical mole fraction at flame extinction is examined with velocity ratio and global strain rate. Onset conditions of edge flame oscillation and flame oscillation modes are also provided with global strain rate and added nitrogen mole fraction to fuel stream (fuel Lewis number). It is seen that flame length is closely relevant to lateral heat loss, and this affects flame extinction and edge flame oscillation considerably. Edge flame oscillations in low strain rate flames are experimentally described well and are categorized into three: a growing oscillation mode, a decaying oscillation mode, and a harmonic oscillation mode. The regime of flame oscillation is also provided at low strain rate flames. Important contribution of lateral heat loss even to edge flame oscillation is clarified

비예혼합화염과 예혼합화염의 속도 섭동에 따른 응답 특성 (How to Prepare the Manuscript for Submission to the Proceedings of KSPE Conference)

  • 안명근;김태성;윤영빈
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2017년도 제48회 춘계학술대회논문집
    • /
    • pp.612-616
    • /
    • 2017
  • 비예혼합합화염과 예혼합화염의 화염응답특성을 속도섭동을 다양하게 변경하며 실험하였다. 연료로는 수소($H_2$)/메탄($CH_4$)을 50/50 %로 혼합한 혼합연료를 사용하였으며 산화제로는 공기를 사용하였다. OH 자발광(OH fluorescence)을 이용하여 화염이미지를 계측하였으며 PMT(Photo Multiplier Tube)를 이용하여 열 방출량을 계측하였다. 계측된 이미지는 MatLab 코드를 이용하여 수치화하였다. 예혼합화염의 결과에서는 진폭이 증가할수록 화염섭동이 증가하는 경향성을 보았으며 진폭에 따라서 화염전달 함수의 게인 값이 선형적인 거동을 하는 것을 관찰하였다. 비예혼합화염의 화염길이는 진폭이 증가할수록 짧아지는 것을 관찰하였고 게인 값은 진폭에 비선형적인 거동을 하는 것을 확인하였다.

  • PDF

초폭굉 모드 램 가속기의 연소실 길이에 따른 화염유지특성에 대한 수치적 연구 (A Numerical Study on Flame Stability with Extended Combustor in Superdetonative Mode Ram Accelerator)

  • 성근민;정인석
    • 한국연소학회지
    • /
    • 제12권4호
    • /
    • pp.31-38
    • /
    • 2007
  • An numerical study was conducted on superdetonative mode ram accelerator with length extended combustor. The computation condition was based on ISL's RAMAC30 II S225 experiment. For 50% length increased combustor, flame is not sustained. For the case of 60% and 70% increase, flame is successfully sustaind. But detonation wave is oscillating and acceleration is fluctuating. Extention of combustor is helpful for sustaing detonation wave but it may cause unstart.

  • PDF

초폭굉 모드 램 가속기의 연소실 길이에 따른 화염유지특성에 대한 수치적 연구 (A Numerical Study on Flame Stability with Extended Combustor in Superdetonative Mode Ram Accelerator)

  • 성근민;정인석
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.126-129
    • /
    • 2007
  • An numerical study was conducted on superdetonative mode ram accelerator with extended combustor. The computation case was based on ISL's RAMAC30 II experiment. For 50% length increased combustor, flame is not sustained. For the case of 60% and 70% increase, flame is successfully sustaind. But detonation wave is oscillating and acceleration is fluctuating. Increasing of combustor length is helpful for sustaing detonation wave but it may cause unstart.

  • PDF

화염거동을 통한 이중선회 가스터빈 모델 연소기에서 연소실 길이에 따른 연소 불안정성 이해 (Combustion Instability Comprehension with Combustion Chamber Length in Dual Swirl Gas Turbine Model Combustor from Flame Behaviors)

  • 장문석;이기만
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.233-235
    • /
    • 2015
  • This study is to investigate the combustion instability of the variation of combustion chamber length in dual swirl gas turbine model combustor. When equivalence ratio was fixed at 1.1, as the length of the combustion chamber increases the value of the frequency decreased in 7kW while the value of the frequency was constant in 4kW. The analysis of flame behaviors by high speed camera was conducted to identify such trend.

  • PDF

연료분출을 수반하는 보염기 후류에 형성되는 확산화염의 보염특성 (Stabilization Characteristics of the Diffusion Flame Formed in the Wake of Bluff Body with Fuel Injection)

  • 안진근
    • 에너지공학
    • /
    • 제10권3호
    • /
    • pp.223-232
    • /
    • 2001
  • 보염기 후류에 형성되는 화산회생의 보염특성을 고찰하기 위하여 연료 분출각의 변화, 난류발생격자의 설치, 재순환영역 내에 보조 연료의 공급에 따른 화염의 안정범위, 재순환영역의 길이 및 온도, 재순환영역주변의 난류강도 분포를 측정, 고찰하였다. 재순환영역의 길이는 주 연료 분출량의 변화에 따른 영향을 받지 않지만, 연료 분출각 및 주류유속의 변화, 보조 연료의 공급 난류발생격자의 설치 등에 따라 영향을 받는다. 확산화염의 경우 일반적으고 재순환영역의 길이가 길수록 보염성이 불량하지만, 난류발생격자를 설치한 경우에는 재순환영역의 길이가 길수록 보염성이 양호하다. 재순환영역의 온도는 연료 분출각의 변화, 보조 연료의 공급, 난류발생격사의 설치 등에 따라 영향을 받으며, 이론 혼합기 상태에서 최고값에 도달한다. 일반적으로 재순환영역의 온도가 낮을수록 보염성이 양호하지만. 난류발생격자를 설치한 경우에는 재순환영역의 온도가 낮을수록 보염성이 불량하다. 화염이 형성되는 보염기 후류 영역에 대한 난류강도는 격자의 직경이나 구속비가 큰 난류발생 격자를 설치한 경우에 크게 나타나며, 난류강도가 강 할수록 보염성이 불량하다. 연료 분출각의 변화, 난류발생격자의 설치, 재순환영역 내에 보조 연료의 공급 등의 방법으로 확산화염의 보염특성을 제어할 수 있다.

  • PDF

CH4/Air 예혼합화염의 하류영역에서 체류시간 및 열손실에 의한 NOx의 생성특성 (The Effect of Residence Time and Heat Loss on NOx Formation Characteristics in the Downstream Region of CH4/Air Premixed Flame)

  • 황철홍;현승호;탁영조;이창언
    • 대한기계학회논문집B
    • /
    • 제31권1호
    • /
    • pp.99-108
    • /
    • 2007
  • In this study, the NOx formation characteristics of one-dimensional $CH_4$/Air premixed flame using detailed-kinetic chemistry are examined numerically. The combustor length and the amount of heat loss are varied to investigate the effect of residence time and heat loss on the NOx formation in a post-flame region. In the flame region, NO is mainly produced by the Prompt NO mechanism including $N_2$O-intermediate NO mechanism over all equivalence ratios. However, thermal NO mechanism is more important than Prompt NO mechanism in the post-flame region. In the case of adiabatic condition, the increase of combustor length causes the remarkable increase of NO emission at the exit due to the increase of residence time. On the other hand, NO reaches the equilibrium state in the vicinity of flame region, considering radiation and conduction heat losses. Furthermore the NO, in the case of $\phi$=1.2, is gradually reduced in the downstream region as the heat loss is increased. From these results, it can be concluded that the controls of residence time and heat loss in a combustor should be recognized as an important NOx reduction technology.