• Journal of Mechanical Science and Technology
• /
• 제18권7호
• /
• pp.1169-1176
• /
• 2004

Soot has a great effect on the formation of PM (Particulate Matter) in D.I. (Direct Injection) Diesel engines. Soot in diesel flame is formed by incomplete combustion when the fuel atomization and mixture formation were poor. Therefore, the understanding of soot formation in a D.I. diesel engine is mandatory to reduce PM in exhaust gas. To investigate soot formation in diesel combustion, various measurements have been performed with laser diagnostics. In this study, the relative soot diameter and the relative number density in a DJ. engine was measured by using LIS (Laser Induced Scattering) and LII (Laser Induced Incandescence) methods simultaneously which are planar imaging techniques. And a visualization D.I. diesel engine was used to introduce a laser beam into the combustion chamber and investigate the diffusion flame characteristics. To find the optimal condition that reduces soot formation in diesel combustion, various injection timing and the swirl flow in the cylinder using the SCV (Swirl Control Valve) were applied. From this experiment, the effects of injection timing and swirl on soot formation were established. Effective reduction of soot formation is possible through the control of these two factors.

• 한국항공우주학회지
• /
• 제30권4호
• /
• pp.70-76
• /
• 2002

가스터빈 연소기의 스월러와 노즐을 제작하여 스월러 형상 변화에 따른 비연소시 케로신 분무 특성과 연소시에 열유동장의 특성을 조사하였다. 액적의 크기(SMD)와 속도를 파악하기 위해서 위상도플러입자분석기(PDPA)를 이용하였고, 연소 온도를 조사하기 위해서 R-type 열전대(Platinum vs. Platinum-13%rhodium)를 이용하였다. 분무와 화염의 가시화는 스틸 카메라를 이용하였다. 스월러각이 커서 스월수가 큰 경우에 분무 및 화염이 반경방향으로 빠르게 발전하였다. 화염은 스월수가 작을 때는 원추형의 화염이 형성되지만 스월수가 커지면서 스월 모멘텀이 중심축으로 이송되고 혼합이 촉진되어 원통형으로 바뀌었다.

• 한국수소및신에너지학회논문집
• /
• 제28권3호
• /
• pp.315-321
• /
• 2017

A combustion chamber is designed and fabricated for studying the combustion characteristics of counterflow flames at elevated pressure and establishing the fundamental combustion database of counterflow flames. The combustion chamber design aims to allow the maximum operating pressure of 11 bar and be able to conduct flame visualization and the measurements of flame extinction limits, flame temperature and combustion emissions at elevated pressure. Preliminary tests for counterflow nonpremixed $CH_4-NH_3-N_2$/air flames at 1-3 bar have been conducted, and the results confirm the proper operation of the designed chamber.

• 한국추진공학회지
• /
• 제18권6호
• /
• pp.11-18
• /
• 2014

아산화질소/에탄올 추진제 조합을 사용하는 50 N급 추력기 분사기 인접부에서 shadowgraph 기법을 사용하여 연소 유동장을 가시화하였다. 설계 작동조건에서 폭발성 점화가 일어났으며, 급격히 팽창하는 연소가스에 의해 순간적으로 소염되는 현상이 관찰되었다. 최초 점화로부터 약 83 ms 뒤 추진제 분무는 재점화 되었으며, 그로부터 약 23 ms 후 화염이 안정화되는 것이 관찰되었다. 동일한 시퀀스에서 설계 조건보다 산화제 유량을 증가시킨 경우, 소염 현상 없이 완만한 연소 압력 과도 특성을 보였으며 최초 점화로부터 약 17 ms이내에 화염 안정화가 이루어졌다. 이는 점화 직전의 연소기 내부 미연 추진제 혼합 향상에 의한 것으로 생각되었다.

• 한국추진공학회지
• /
• 제17권5호
• /
• pp.121-131
• /
• 2013

V-거터형 보염기가 장착된 덕트형 연소기에서 연소 불안정이 발생할 때 보염기 근처에서 나타나는 화염의 동특성에 대한 실험적 연구를 수행하였다. 화염 구조를 가시화하기 위해서 고속 카메라를 이용한 자발광 계측과 PIV 기법을 사용하였다. 연소 불안정이 발생하면 연소기 내부의 압력 구배에 변화가 생기면서 화염의 역화 현상이 일어나고, 역화의 진행거리는 당량비에 따라서 달라졌다. 역화의 진행거리와 구조에 따라 불안정 화염을 세 가지 유형으로 분류하였다. 일정 당량비 이상에서는 역화가 진행됨에 따라 보염기 앞쪽 끝단에서 특이한 화염 구조를 관측할 수 있었다. 순압력 구배에서 역화 되었던 화염면은 후류로 밀리고, 이때 보염기 안쪽에 형성된 와류로 인하여 재안정화가 이루어지는 것을 확인하였다.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.63-70
• /
• 1998

According to the stringent exhaust emission regulation control of air fuel ratio is one of the most important issues on gasoline engine. Although many researches have been carried out to identify the fuel transport phenomena in a port fueled gasoline engine, complexity of fuel film behavior in the intake port makes it difficult. The fuel film behavior was investigated recently by using visualization method and these gave us qualitative understanding. In this paper, the quantitative measurement method for the port fuel film is studied by using Fast Response Flame Ionization Detector(FRFID). The mass of fuel film on the port wall was measured by using the methods of fuel injection off, injection on and regression. The Fuel film mass was increased with incresing load at the same engine speed.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 춘계학술대회 논문집
• /
• pp.29-36
• /
• 2004

A numerical study is carried out on the detonation wave propagation through a T-shaped flame tube, which represents a crucial part of the combustion wave ignition (CWI) system aimed for simultaneous ignition of multiple combustion chambers by delivering detonation waves. The formulation includes the Euler equations and an induction-parameter model. The reaction rate is treated based on a chemical kinetics database obtained from a detailed chemistry mechanism. A second-order implicit time integration and a third-order TVD algorithm are Implemented to solve the theoretical model numerically. A total of more than two-million grid points are used to provide direct insight into the dynamics of the detonation wave. Several important phenomena including detonation wave propagation, degeneration, and re-initiation are carefully examined. Information obtained can be effectively used to facilitate the design and optimization of the flame tubes of CWI systems.

• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.31-39
• /
• 2002

Recently, many researches have been performed to improve the performance of the combustion and emission in a D.I.Diesel engine. One of the main factors effect on the characteristics of combustion is the characteristic of air-fuel mixing. Thus, swirl flow has been used widely to improve the air-fuel mixing in a D.I.Diesel engine. Since this swirl flow has interaction with other factors, in this study, the characteristics of the combustion and the flame effected by the swirl flow generated by SCV was investigated. From this experiment, the interactions of the swirl flow and the injection timing made clear. In addition, the effects of swirl and injection timing on the diffusion flame were clarified.

• 한국자동차공학회논문집
• /
• 제8권2호
• /
• pp.50-56
• /
• 2000

It is well known that the combustion phenomenon of diesel engine is an unsteady turbulent diffusion combustion. Therefore, the combustion performance of diesel engine is related to a complex phenomenon which involves the various factors of combustion, such as a injection pressure, injection timing, injection rate, and operation conditions of engine. In this study, the spray and the flame development processes in a single cylinder D.I. diesel visualization engine which uses the electronically controlled injection system were visualized to interpret the complicated combustion phenomenon by using high speed CCD camera. In addition, the cylinder pressure and heat release rate were also obtained in order to analyze the diesel combustion characteristics under several engine conditions.

• 한국군사과학기술학회지
• /
• 제5권1호
• /
• pp.107-115
• /
• 2002

In this paper, spray and combustion characteristics of a liquid-fueled ramjet engine were experimentally investigated. The spray penetrations were measured to clarify the spray characteristics of a liquid jet injected transversely into the subsonic vitiated airstream, which Is maintained a high velocity and temperature. The spray penetrations are increased with decreasing airstream velocity, increasing airstream temperature, and increasing air-fuel momentum ratio. To compensate our results of penetrations, the new experimental equation were modified from Inamura's equation. In the case of insufficient penetration, the combustion phenomenon in ram-combustor were unstable. Therefore, the sufficient penetration must be considered to make a stable flame.