• Journal of Environmental Science International
• /
• v.23 no.1
• /
• pp.53-60
• /
• 2014

Adsorption of phenol on activated carbon in a fixed bed was studied. The effects of fixed-bed length, superficial velocity (flow rate) and particle size of adsorbent on fixed-bed performance were investigated. Some characteristic parameters such as the breakthrough time ($t_{0.05}$), saturation time ($t_{0.95}$), length of mass transfer zone ($L_{MTZ}$), adsorptive capacity (W), and adsorption rate constant ($K_a$) were derived from the breakthrough curves. Adsorbent particle sizes significantly affected the shape of the breakthrough curve. Larger particle sizes resulted in an earlier breakthrough, a longer $L_{MTZ}$ and a lower adsorption rate. Superficial velocity was a critical factor for the external mass transfer during fixed-bed adsorption process. The external mass transfer resistance was dominant as increasing superficial velocity.

• Journal of Technologic Dentistry
• /
• v.28 no.2
• /
• pp.347-353
• /
• 2006

The Purpose of this study was to compare the distribution of implant fixtures according to length and diameter between screw-retained and cement-retained implant-supported fixed prosthesis and to asses whether prosthesis retained types affected the selection of size of implant fixtures. This study presents a follow-up 2,416 implant-supported fixed type prosthesis that have been screw retained or cemented retained for about 10 years in 14 dental clinics. Included in the study were 458 men and 397 women and implant fixtures used in this study were screw retained type 1,057 and 1,359 of cemented retained type. The statistical results among the diameter types of fixture by prosthesis retained type was no significant difference noted (P= 0.809) and there was significant differences was enough to among the lengths of fixture by prosthesis retained type (P= 0.020). However there were no significant difference among the fixture diameter types and length by prosthesis retained type (P= 0.486). So there was not affected to prostheis fixation mechanism for the size of implant fixtures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11C
• /
• pp.1491-1497
• /
• 2004

The psychoacoustic model in MPEG audio layer-III (MP3) encoder is optimized for the fixed-point processing. The optimization process consists of determining the data word length of arithmetic unit and the algorithm for transcendental functions that are often used in the psychoacoustic model. In order to determine the data word length, we defined a statistical model expressing the relation between the fixed-point operation errors of the psychoacoustic model and the probability of alteration of the allocated bits doe to these errors. Based on the simulations using this model, we chose a 24-bit data path and constructed a 24-bit fixed-point MP3 encoder. Sound quality tests using the constructed fixed-point encoder showed a mean degradation of -0.2 on ITU-R 5-point audio impairment scale.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.6
• /
• pp.467-472
• /
• 2021

In this paper, the ignition trans used in the gas boiler was produced to measure current, power factor, and power consumption. As a result of measuring the power factor, the self-made ignition trans was higher than that of foreign products and the power consumption was lower. The ignition gap was fixed to 2 m, and when the ignition rod length was 30cm, 500cm, and 1000cm, it was measured as 3.45A, 14.5A, and 16.2A. When the ignition gap was fixed to 4mm and the ignition rod length was 30cm, 500cm, and 1000cm, it was measured as 2.8A, 10.1A, and 13.2A. When the ignition gap was fixed at 6mm and the ignition rod length was 30cm, 500cm, and 1000cm, it was measured as 2.73A, 10.2A, and 32.6A. When the ignition gap was fixed at 8 mm and the ignition rod length was 30 cm, 500cm, and 1000cm, it was measured as 3.13A, 9.37A, and 21.4. The ignition gap was fixed at 10 mm, and when the ignition rod length was 30cm, it was measured as 3.4A, 14.4 A, and 25.6A. In conclusion, as the length of the ignition rod increased, the current also increased.

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.4
• /
• pp.1175-1186
• /
• 2014

We construct new binary optimal self-dual codes of length 50. We develop a construction method for binary self-dual codes with a fixed-point-free automorphism of order 2. Using this method, we find new binary optimal self-dual codes of length 52. From these codes, we obtain Lee-optimal self-dual codes over the ring $\mathbb{F}_2+u\mathbb{F}_2$ of lengths 25 and 26.

• New & Renewable Energy
• /
• v.3 no.1 s.9
• /
• pp.13-19
• /
• 2007

A triangular fin with variable fin base thickness and base height is analyzed and optimized for the fixed fin base height using a two-dimensional analytical method. At the middle of the fin length, the variation of the temperature along the fin height is listed. The influences of the fin length, base thickness and base height on the heat loss and fin efficiency are analyzed, The optimum heat loss, corresponding optimum efficiency and optimum fin length as a function of the fin base thickness are presented. The optimum heat loss and optimum fin tip length as a function of the convection characteristic number are represented.

• International journal of advanced smart convergence
• /
• v.1 no.1
• /
• pp.34-37
• /
• 2012

In a storage system, the performance of data deduplication can be increased if we consider the file modification pattern. For example, if a file is modified at the end of file region then fixed-length chunking algorithm superior to variable-length chunking. Therefore, it is important to predict in which location of a file is modified between files. In this paper, the essential idea is to exploit an efficient file pattern checking scheme that can be used for data deduplication system. The file modification pattern can be used for elaborating data deduplication system for selecting deduplication algorithm. Experiment result shows that the proposed system can predict file modification region with high probability.

• Structural Engineering and Mechanics
• /
• v.4 no.1
• /
• pp.49-59
• /
• 1996

This paper considers large deflection problem of a simply supported beam with variable are length subjected to a point load. The beam has one of its ends hinged and at a fixed distance from this end propped by a frictionless support over which the beam can slide freely. This highly nonlinear flexural problem is solved by elliptic-integral method and shooting-optimization technique, thereby providing independent checks on the new solutions. Because the beam can slide freely over the frictionless support, there is a maximum or critical load which the beam can carry and it is dependent on the position of the load. Interestingly, two possible equilibrium configurations can be obtained for a given load magnitude which is less than the critical value. The maximum arc-length was found to be equal to about 2.19 times the fixed distance between the supports and this value is independent of the load position.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.229-231
• /
• 2000

Nowadays, the telecommunication service provider has witnessed an unprecedented growth in data traffic and the need for networking. optical fiber can provide some THz of huge bandwidth WDM technology has been an emerging issue for the efficient use of optical links. WDM uses a number of different wavelength that are assigned to each channel. The minimal number of optical transceivers and receivers should be used in a node to build an economic WDM transmission system without degrading system performance. Hence, the analysis of performance parameters such as throughput and delay is important to guarantee the WDM system performance. in this paper, the performance of a MAC protocol on a slotted WDM system that has a tunable transmitter(Txt), a tunable receiver(Rxt), and a fixed receiver(Rxf), respectively, on each node, was statistically analyzed The computer simulation validates the performance analysis.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.81-87
• /
• 2008

A geometrically asymmetric trapezoidal fin with variable fin base thickness and height is optimized based on the fixed fin base height using a one-dimensional analytic method. The temperature profile along the normalized X position in the fin is presented. For the fixed fin base height, the optimum heat loss, fin length and efficiency as a function of inside fluid convection characteristic number, fin base thickness and height, fin shape factor, convection characteristic numbers ratio and ambient convection characteristic number are represented. One of the results shows that the effect of fin base height and ambient convection characteristic number on the optimum values is remarkable.