• 공업화학
• /
• 제20권1호
• /
• pp.62-66
• /
• 2009

지속적인 연료비용의 상승 및 가채매장량의 한계로 인하여 비재래형 연료 및 공정 부산물의 연료적 가치에 대한 관심이 증가하고 있으며, 그중 대표적인 것이 오일샌드 및 이의 부산물인 코크스의 이용기술이다. 본 연구에서는 오일샌드 코킹 공정에서 발생되는 오일샌드 코크스의 에너지화 이용을 위하여 실험실 규모의 고정층 가스화 시스템을 이용한 연구를 수행하였다. TGA를 이용하여 오일샌드 역청 및 코크스의 연소 반응특성을 확인하였으며, 실험실 규모의 가스 화기를 이용하여 산소/연료 비율, 온도 및 스팀주입량에 따른 가스화 후 생성되는 합성가스의 특성을 파악하였다. 오일샌드 코크스는 높은 탄소함량, 발열량 및 황 함량 특성을 보인 반면 낮은 회재함량과 반응성의 특성을 보였다. 오일샌드 코크스 가스화의 경우 일반적으로 온도, 스팀주입량 증가 및 산소주입량 감소에 따라 $H_2$ 생성량은 증가하였으며 $CO_2$ 생성량은 감소하는 경향을 보였다. 합성가스 발열량은 $2100kcal/Nm^3$ 정도의 값을 보여 오일샌드 코크스의 수소원료 및 연료로서 이용 가능성을 확인하였다.

• Environmental Engineering Research
• /
• 제25권1호
• /
• pp.80-87
• /
• 2020

Landfill waste decomposition generates a dark effluent named, leachate which is characterized by high organic matter content. To minimize these polluting effects, it becomes necessary to develop an effective landfill leachate treatment process. The objective of this study was to evaluate the performance of an innovative approach based on air stripping, anaerobic digestion (AD) and aerobic activated sludge treatment. A reduction of 80% of ammonia and an increase of carbon to nitrogen ratio to 25 were obtained, which is a suitable ratio for AD. This latter AD was performed in fixed bed reactor with progressive loading rate that reached 2 and 3.2 g COD/L/d for the raw and diluted leachate (1:2), respectively. The anaerobic treatment led to significant removal of chemical oxygen demand (COD) and biogas production, especially for the diluted leachate. The COD removal was of 78% for the raw leachate and a biogas production of 4 L/d with 70% methane content. The use of the diluted leachate led to 81% of COD removal and 7 L/d biogas with 75% methane content. It allowed a removal of 77% COD and more than 97% of the organic compounds present in the initial leachate sample.

• 자원환경지질
• /
• 제21권1호
• /
• pp.97-106
• /
• 1988

The purpose of this study is to collect basic data which are prerequisite for quantitative analysis of coal logging data. The study involves laboratory measurements of physical properties such as seismic velocities (P,S-waves), resitivity and density of domestic and imported foreign coals. The relationships between these properties were analyzed by using cross-plots. Correlation between the physical properties of coal and the results of chemical analysis (calorie, fixed carbon, ash, moisture, volatile matter and sulfur contents) was also studied to obtain ideas about coal quality analysis using logging data. Summarized results are as follows: 1. $V_P$ is exponentialy related to $V_S$. And the average value of $V_P$ is about l.8 times as large as $V_S$. 2. Since coal has very low density compared with surrounding sedimentary rocks, density logging is appeared to be the best method for identifying coal seams and evaluating their qualities. 3. For the case of domestic coals, the ash contents and calorie show a perfect inverse relationship. Since the density increases as increase of ash content with a well-defined functional form, the ash content of domestic coals can be estimated by density measurements. 4. Because of low ash content, low density and high resistivity, foreign coals and domestic lignites are easily distinguished from domestic coals.

• Journal of Electrochemical Science and Technology
• /
• 제15권2호
• /
• pp.291-298
• /
• 2024

Due to its high theoretical capacity, Silicon (Si) has shown great potential as an anode material for lithium-ion batteries (LIBs). However, the large volume change of Si during cycling leads to poor cycling stability and low Coulombic efficiency. In this study, we synthesized Si/Carbon C45:Graphene composites using a ball-milling method with a fixed Si content (20%) and investigated the influence of the C45/Gr ratio on the electrochemical performance of the composites. The results showed that carbon C45 networks can provide good conductivity, but tend to break at Si locations, resulting in poor conductivity. However, the addition of graphene helps to reconnect the broken C45 networks, improving the conductivity of the composite. Moreover, the C45 can also act as a protective coating around Si particles, reducing the volume expansion of Si during charging/discharging cycles. The Si/C45:Gr (70:10 wt%) composite exhibits improved electrochemical performance with high capacity (~1660 mAh g^-1 at 0.1 C) and cycling stability (~1370 mAh g^-1 after 100 cycles). This work highlights the effective role of carbon C45 and graphene in Si/C composites for enhancing the performance of Si-based anode materials for LIBs.

• 한국응용과학기술학회지
• /
• 제33권2호
• /
• pp.264-270
• /
• 2016

음식물류폐기물의 에너지 잠재량은 2,206 천TOE 임에도 대부분 사료화와 퇴비화로 약 85.5%가 재활용 되고 있으며, 해당 시설에서 생산된 제품 중 사료화는 72%, 퇴비화는 61%가 무상판매되고 있다. 이에 본 연구는 음식물류폐기물을 반탄화 반응을 이용하여 연료화하고자 한다. 하지만 음식물류폐기물만 단독으로 연료화 할 경우 연료적 가치가 낮아짐을 예방하고자 하수슬러지를 일정 비율로 혼합하여 진행하였다. 음식물류폐기물과 하수슬러지의 혼합비율은 10:0, 8:2, 6:4, 5:5로 하였다. 실험 결과 혼합 비율에 상관없이 반응온도 $240^{\circ}C$이상에서 함수율 10% 이하로 감소하는 것을 확인 할 수 있었다. 고정탄소의 경우 반응온도가 높아질수록, 하수슬러지의 비율이 높아질수록 증가하였으며, 초기 1.1%에서 최대 약 36% 로(혼합비율 6:4, 반응온도 $270^{\circ}C$) 측정 되었으며, 발열량의 경우 반응온도 $240^{\circ}C$부터 고형연료제품기준인 3,000Kcal/Kg 이상에 만족하는 발열량을 나타내었으며, 초기시료보다 약 6배 정도 증가한 발열량을 얻을 수 있었다. Van krevelen Diagram이 Lignite 범위까지 이동하였으며, 슬러지 혼합비율이 높아질수록 높은 연료비와 5,500Kcal/kg 이하의 연소성지수를 얻을 수 있었다. 하수슬러지 혼합 비율이 높아질수록 발열량은 감소하지만, 고정탄소 함량 증가, 연료비 개선 등으로 음식물류폐기물만 단독 고형연료화 한 것 보다 연료로써의 품질이 좋아지는 것을 확인 할 수 있었다.

• 상하수도학회지
• /
• 제29권1호
• /
• pp.57-63
• /
• 2015

Recently, Korea's municipal wastewater treatment plants generated amount of wastewater sludge per day. However, ocean dumping of sewage sludge has been prohibited since 2012 by the London dumping convention and protocol and thus removal or treatment of wastewater sludge from field sites is an important issue on the ground site. The hydrothermal carbonization is one of attractive thermo-chemical method to upgrade sewage sludge to produce solid fuel with benefit method from the use of no chemical catalytic. Hydrothermal carbonization improved that the upgrading fuel properties and increased materials and energy recovery, which is conducted at temperatures ranging from 200 to $350^{\circ}C$ with a reaction time of 30 min. Hydrothermal carbonization increased the heating value though the increase of the carbon and fixed carbon content of solid fuel due to dehydration and decarboxylation reaction. Therefore, after the hydrothermal carbonization, the H/C and O/C ratios decreased because of the chemical conversion. Energy retention efficiency suggest that the optimum temperature of hydrothermal carbonization to produce more energy-rich solid fuel is approximately $200^{\circ}C$.

• 공업화학
• /
• 제17권3호
• /
• pp.280-285
• /
• 2006

본 연구에서는 KOH를 첨착한 활성탄에서 황화수소의 흡착특성을 동특성 실험을 통해 관찰하였다. 특히 수분과 산소 농도가 흡착특성에 미치는 영향을 확인하였다. KOH를 첨착시킨 활성탄의 표면적, 세공부피 및 크기 분포 등의 기공 특성들은 질소 흡탈착 등온선을 이용하여 측정하였으며, 흡착량은 Langmuir와 Freundlich 등온식으로 모사하였으며 KOH를 첨착시킨 활성탄에서 황화수소의 흡착량은 Langmuir 등온식으로 잘 묘사되었다. 산소 농도의 증가는 KOH 첨착 활성탄의 황화수소 흡착성능에 큰 영향을 나타내었다.

• Elastomers and Composites
• /
• 제39권1호
• /
• pp.51-60
• /
• 2004

본 연구에서는 organoclay를 혼합한 NR/BR blend의 가황특성, 동적점탄성 및 기계적 물성을 carbon black 및 silica를 함유한 배합고무와 비교 평가하였다. Solution 혼합법을 이용함으로써 광범위한 나노 복합체를 제조할 수 있었으며, 충전제의 함량은 10phr로 고정하였다. XRD 실험으로 clay의 삽입 및 박리정도를 측정하였다. 통상적인 혼합법을 이용할 경우 clay의 박리 또는 삽입정도가 미약한 반면 solution 혼합법을 이용할 경우 광범위한 박리형태의 clay 배합고무를 얻을 수 있음을 확인하였다. Clay 배합고무는 carbon black 및 silica를 함유한 배합고무에 비해 높은 tan ${\delta}$값을 나타내며, solution 혼합법을 이용할 경우 통상적인 혼합법에 의해 제조된 clay 배합고무에 비해 우수한 기계적 물성을 가짐을 확인할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.577-583
• /
• 2017

A series of microwave waste tire pyrolysis experiments were conducted using a lab-scale batch reactor to delineate the effects of microwave ouput power on the pyrolysis behavior of waste tire. As results of experiments, it was found that as the microwave output power was increased from 1.22 kW/kg to 2.26 kW/kg, the reaction temperature and oil yield increased significantly and the required time and microwave power consumption decreased remarkably, respectively. With increased power consumption, the content of the fixed carbon of pyrolysis residue increased.

• 미생물학회지
• /
• 제13권1호
• /
• pp.1-23
• /
• 1975

This experiment was designed to elucidate the environmental factors in rhizosphers of bamboo forest that affect the distribution and the population size of Azotobacter, and also to estimate the annual productivities of nitrogen fixed by Azotobacter species. The results of this experiment can be summarized as follows ; The rhizosphere of bamboo forest contained high free sugars as of 3-8 times more than non-rhizosphere (Bacon, 1968), and the contents of organic matter and amino acids of that are reltively higher than this. Because of high content of potassium, average of soil pH is near at 7.0. As above-mentioned enviromental factors, the population sizes of Actinomycetes, general fungi, general bacteria and Azotobacters are larger than those of non-rhizosphere and the ofllowings are general fungi and general bacteria by turns. Azotobacter is dependent upon the antagonistic Actinomycetes. The main carbon source for Azotobacter in nitrogn flxation at the rhizosphere was glucose and minors were fructose, maltose and sucrose by turns. Annual gains of nitrogen by Azotobacters in soil of bamboo forest within 10cm from surface are estimated as of 88.94 kg/ha at site A, 60.4kg/ha at site B and 67.38kg/ha at site C, respectively.