• 제목/요약/키워드: Fixed Quantity Mode

검색결과 6건 처리시간 0.019초

이동 통신 채널에서 다중 트렐리스 부호화된 $\pi$/4 shift QPSK의 연집 에러 정정 복호 방식 (A burst-error-correcting decoding scheme of multiple trellis-coded $\pi$/4 shift QPSK for mobile communication channels)

  • 이정규;송왕철;홍대식;강창언
    • 전자공학회논문지A
    • /
    • 제32A권4호
    • /
    • pp.24-31
    • /
    • 1995
  • In this paper, the dual-mode burst-error-correcting decoding algorithm is adapted to the multiple trellis-coded .pi./4 shift QPSK in order to achieve the improvement of bit error rate (BER) performance over fading channels. The dual-mode adaptive decoder which combines maximum likelihood decoding with a burst detection scheme usually operates as a Viterbi decoder and switches to time diversity error recovery whenever an uncorrectable error pattern is identified. Rayleigh fading channels and Rician fading channels having the Rician parameter K=5dB are used in computer simulation, and the simulation results are compared with those of interleaving techniques. It is shown that under the constraint of the fixed overall memory quantity, the dual-mode adaptive decoding scheme gains an advantage in the BER performance with respect to interleaving strategies.

  • PDF

프레스에 의한 블랭킹 판재의 응력 해석 (Stress Analysis of Blanking Plate Applied by Press)

  • 조재웅;한문식
    • 한국기계가공학회지
    • /
    • 제7권2호
    • /
    • pp.66-71
    • /
    • 2008
  • The data of the deformation and the stress according to time are studied at upper model of press and lower model of the blanking plate applied by press with the width, length and height of 0.4 m and 0.6 m respectively. The press is pushing downward on the plate fixed at the lower floor. These data are compared and investigated through this study. By using these results, there is the maximum deformation at 4 corners in the lower plate model of aluminium alloy fixed at lower floor. This deformation incase of elapsed time of 0.6 second becomes 4 times as much as in case of elapsed time of 0.2 second. The quantity of deformation at the lower plate model becomes more than at the upper press model to the extent of 10%. At the lower plate model of aluminium alloy, there is the maximum Von-Mises equivalent stress at 4 corners and both sides of middle area on the lower plate model of aluminium alloy. This stress in case of elapsed time of 0.6 second becomes 6 times as much as in case of elapsed time of 0.2 second. The Von-Mises equivalent stress of lower plate model becomes 2 times as much as that of upper press mode.

  • PDF

SUPPLY-DEMAND, COMMERCIAL DISTRIBUTION AND TRANSACTION OF THE CULTURED TUNA IN JAPAN - EMPHASIZING ON THE GLOBAL EXPANSION OF THE TUNA-FARMING BUSINESS -

  • Yamamoto, Naotoshi;Kameda, Kazuhiko;Nishida, Akari;Kitano, Shinichi
    • 수산경영론집
    • /
    • 제39권1호
    • /
    • pp.87-114
    • /
    • 2008
  • The cultured tuna production which has suddenly expanded at the short time and the demand for it attract attention. Farming mode, distribution transactions, change of the market (domestic and international) and the price trend are reviewed from the Japan's position which is the biggest consuming country. This paper tries to describe the current status of the food system related to the cultured tuna. Japanese government began the development of the tuna culture technology in 1970. It was by the Fisheries Agency's project. Kinki University which is the large scale private university in Japan participated in the project. After that, 32 years have passed. Kinki University established the full farming of the bluefin tuna in August, 2002. On the other hand, in 1974, one Japanese private enterprise began its tuna farming business in Canada. Kinki University gave this company technical cooperation. Also, in the early stages of the 90s, as for the policy of the overseas fishery cooperation foundation, it supported the tuna farming business in Australia. It is very clear to understand that the long-term technological-development has supported the take-off scene of the tuna culture business not only in foreign countries but also in Japan. The total shipment scale of the cultured tuna expanded very much within about 10 recent years. However, the decrease of the wild tuna catch, the reinforcement of the fisheries regulation and the tuna body to dwarf are remarkable now. Under the condition as the mentioned above, Japan's tuna consumption, especially, in the market at the fatty meat of tuna of the cultured tuna is building up firm status. At present, the Mediterranean Sea coastal countries, Australia, Mexico and Japan have the tuna farming sites. Australia farms the southern bluefin tuna. The others do the bluefin tuna. About for 3 years, Japan farms the juvenile of the tuna. The global production areas are as follows. 8 coastal countries of the Mediterranean Sea; 18,000 tons (61 % of the cultured tuna quantity in foreign countries), Mexico; 4,500 ton (15%), Australia; 7,000 tons (24%). In 2003, Japan has 32 managements and 39 offices for tuna farming. In Japan, Kyushu and Okinawa district, the share shows itself as 80 % of the domestic production quantity. Especially, the share of Amami-oshima Island in Kagoshima Prefecture exceeds 60 %. Therefore, this island has the maximum production scale of Japan. The amount of supply of BT and SBT was 56,000 tons in 2004. In Abroad, the tuna farming business forms a fixed connection between the importer and the wholesaler which have their office in Japan. In the field of the capital composition, the payment in advance, transaction and the way of settlement, each maintains their fixed relation. The market conditions of the cultured tuna are supported by "the decline of price level" and "the expansion of the general public consumption segment". These lead a team merchandising, and it is supported by the fixed business connection of each. This makes the profit of each business which are on the cultured tuna distribution. However, they have competition on the power balance among them.

  • PDF

산부인과 펄스형 $CO_2$ 레이저의 펄스모듈 특성에 의한 동작파형의 일정한 시스템의 구현 (Fixed system of action waveform by pulse module special quality of obstetrics and gynecology pulse style $CO_2$ laser relationship embodiment)

  • 김휘영
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.159-161
    • /
    • 2007
  • $CO_2$ laser sees that is most suitable to get this effect through minimum formation damage and advantage that is root enemy of effect that happen in minimum cellular tissue depth of 0.1mm is stable living body organization or internal organs institution. Formation damage by ten can be related in formation's kind or energy density, length of evaporation time. If shorten evaporation time, surroundings cellular thermal damage 200 - because happen within 400ums laser beam in rain focus sacred ground surroundings cellular tissue without vitiation me by evaporation Poe of very small floor as is clean steam can. Application is possible to vulva cuticle cousins by a paternal aunt quantity, uterine cancer, cuticle tumor by laser system that $CO_2$ laser gets into standard in obstetrics and gynecology application. Because effect that super pulse output is ten enemies of laser if uniformity one pulse durations are short almost is decreased, most of all pulse module special quality of pulse style $CO_2$ laser for obstetrics and gynecology mode stabilization by weight very, in this research to get into short pulse duration and higher frequency density, do switching by high frequency in DC-DC Converter output DC's ripple high frequency to be changed, high frequency done current ripple amount of condenser for output filter greatly reduce can. Ripple of output approximately to Zero realization applying possible inductor realization through a special quality experiment do.

  • PDF

IS 감리 품질 향상을 위한 성숙도 기반의 평가 모델 플랫폼 (Evaluation Model Platform based on Mature to improve IS audit quality)

  • 이종석;김영곤
    • 한국인터넷방송통신학회논문지
    • /
    • 제23권6호
    • /
    • pp.9-14
    • /
    • 2023
  • 정보시스템 감리의 목적은 정보시스템 구축 과정에서 발생하는 모든 위험 요소를 선제적으로 발견하고 이를 효율적으로 관리하여 정보시스템 개발 목적을 달성하고자 하는 것이다. 그러나 감리 현장에서는 정보시스템 감리 과정에 대한 품질 및 효과에 대하여 많은 불만을 표출하고 있어, 이에 대한 문제 해결을 통해 정보시스템의 효과적이고 효율적인 구축에 실질적인 도움이 되도록 하는 방법에 관하여 많은 연구가 진행되고 있다. 본 논문에서는 감리인과 평가자 모두에게 상호 이해가 가능하도록 다단계 감리평가 모델을 제안하여, 각 단계의 품질 레벨을 향상시키는 성숙화 과정을 거치는 모델을 제시하였다. 성숙도에 기반한 이 평가 모델 플랫폼은 감리인과 평가자 상호 간의 협의를 통해 효율적으로 개선사항을 도출하고 실시간 검색을 통해 이를 시정하여 전체 시스템을 성숙화하는 다단계 모델로서 정보시스템 구축과 정을 효율적으로 관리하고자 하는 것이 주 목적이다.

SAR 원격탐사를 활용한 Galapagos Sierra Negra 화산의 최근 마그마 활동 추정 (Evaluation of Recent Magma Activity of Sierra Negra Volcano, Galapagos Using SAR Remote Sensing)

  • 송주영;김덕진;정정교;김영철
    • 대한원격탐사학회지
    • /
    • 제34권6_4호
    • /
    • pp.1555-1565
    • /
    • 2018
  • 화산체의 미세 지표변위 관측은 화산의 위험성과 분화 가능성을 평가하는데 중추적인 역할을 한다. 화산체 관측을 위해 고정 지상 관측 장비들을 이용할 경우 유지 관리가 어렵고 위험 및 비용 지출이 큰 반면, 인공위성을 이용한 원격탐사 기법은 저비용으로 정기적인 모니터링이 가능하다. 이 논문에서는 인공위성 합성개구레이더(Synthetic Aperture Radar; SAR) 간섭기법(Interferometric SAR; InSAR)을 Galapagos Sierra Negra 화산에 적용하여 2005년 화산분화 이전의 변형을 효과적으로 연구한 Chadwick et al.(2006)의 연구에 이어, 가장 최근에 이 화산체가 어떠한 화산활동을 하고 있는지를 최신 SAR 인공위성인 Sentinel-1자료를 이용하여 분화 전 마그마 활동을 분석하였다. 2017년 1월부터 2018년 1월까지의 descending mode Sentinel-1A SAR 영상을 취득하여 고정산란체 간섭기법(Persistent Scatter InSAR)을 적용하였으며, Mogi model을 통해 최근 마그마의 활동 깊이 및 팽창량을 추정하였다. 그 결과 2018년 6월 분화 이전의 화산체 활동 양상이 2005년 분화 이전의 활동 양상과 유사하다는 사실을 확인하였고, 활동 깊이와 팽창 반경을 추산해 내는 데 성공하였다. 본 연구 결과는 인공위성 SAR와 역산 기법을 통해 화산체의 활동 양상을 특징짓고 이를 통해 화산분화의 조기 모니터링 가능성을 제시하고 있다.