• 대한정형도수물리치료학회지
• /
• 제11권2호
• /
• pp.71-82
• /
• 2005

The couple force of the scapular stabilizers for upward rotation that include the upper and lower trapezius, serratus anterior muscles is essential to maintain the stability of shoulder joint. But if there is an imbalance of these muscles, it would occur many problems of shoulder joint. A push-up plus exercise with an unstable support is used in order to increase the muscle activity and stimulate the proprioception of shoulder joint. The purpose of this study was to compare the muscle activity of upper and lower trapezius, serratus anterior muscles and to determine which exercise is more effective when subjects perform push-up plus exercise in the stable support and unstable support. 15 healthy subjects and 15 painful subjects with injury of shoulder joint participated in this study. Surface electromyography data were collected during plus phase of push-up plus exercise. The types of push-up plus exercise were composed of three conditions. Stable type is subjects performed the push-up plus exercise on the fixed support and unstable type 1 is on the sling without shaking and unstable type 2 is on the sling with shaking by tester's manual. The upper and lower trapezius activities of injured group were higher than uninjured group at three measure conditions, but serratus anterior activities were not. The UT/SA ratio of injured group was higher than uninjured group at three measure conditions. The serratus anterior activities were most high at unstable 2 measure in both groups. The UT/SA ratio was most low at unstable 2 measure condition in injured group only. The present result revealed that push-up plus exercise in the unstable support with shaking which took most high serratus anterior activities and most low of UT/SA ratio is optimal cure method that can improve the imbalance of the scapular stabilizer.

• 융합신호처리학회논문지
• /
• 제14권2호
• /
• pp.136-146
• /
• 2013

본 논문에서는 FX 형식의 한일상관기(Korea-Japan Joint VLBI Correlator, KJJVC)의 잔차 지연 보정 알고리즘을 제안하였다. KJJVC의 초기 잔차 지연보정 알고리즘에는 연산의 고속화를 위해 정수 연산과 위상보정 계수를 위한 cos/sin table을 도입하였다. 그리고 잔차 지연 알고리즘의 초기설계에서 데이터의 타이밍과 잔차 지연 위상의 불일치와 비트쉬프트와 잔차 지연 위상의 불일치 문제를 해결하였다. VCS의 잔차 지연 알고리즘의 최종 설계에서는 잔차 지연보정된 값을 FFT segment에 적용할 때 잔차 지연 보정 회전 메모리가 초기화 되지 않는 것을 수정하였다. 제안한 잔치 지연 보정 알고리즘을 이용하여, 교차 전력 스펙트럼의 대역폭 모양이 모든 대역폭에 대해서 손실이 없이 평탄한 것을 확인하였다. 제안한 잔차 지연보정 알고리즘의 유효성을 확인하기 위해 시뮬레이터와 KJJVC를 이용하여 실제 관측데이터를 대상으로 상관처리 시험을 수행하였다. 실험결과를 통하여 제안한 잔차 지연 보정 알고리즘이 KJJVC에 잘 적용되고 있으며, 신호대 잡음비가 약 8% 향상되는 것을 확인하였다.

• 한국전산구조공학회논문집
• /
• 제29권2호
• /
• pp.169-177
• /
• 2016

슬라이딩 궤도는 콘크리트 궤도와 교량 바닥판 사이에 저마찰 슬라이드층을 두어 레일신축이음장치와 같은 특수 장치를 적용하지 않고도 궤도-교량 상호작용 효과를 효과적으로 저감시킬 수 있는 새로운 궤도 시스템으로 개발되고 있다. 이 논문에서는 장경간 교량에 슬라이딩 궤도와 레일신축이음장치를 각각 적용한 경우에 대하여 궤도-교량 상호작용해석을 수행하고 그 결과를 비교 검토하였다. 대상교량은 상호작용 효과를 극대화하기 위하여 9경간 연속 PSC교와 2경간 연속 강합성교를 포함하며, 총 연장 1,205m, 최대 고정지점간 거리 825m인 장경간 교량을 선정하였다. 해석결과 슬라이딩 궤도는 레일신축이음장치를 적용한 경우보다 레일 부가 축력이 더 작은 것은 물론, 지점부에 재하되는 수평 반력 또한 작게 나타나 궤도-교량 상호작용 저감 효과가 뛰어난 것으로 확인되었다. 반면 슬라이딩 궤도는 온도하중에 의해 높은 슬래브 축력이 발생되므로, 궤도 설계 시 슬래브 축력에 대한 단면 설계에 주의를 기울일 필요가 있다.

• 근관절건강학회지
• /
• 제1권1호
• /
• pp.97-115
• /
• 1994

The purpose of this study was to examine the reliability and validity of the observed behaviors of subjects who suffered from low back pain with spinal diseases, Thirty two low back pain patients admitted on the neurosurgical unit in an army hospital were compared with 30 normal controls belonged to an army unit, by means of matching the age, hight and weight. Observed pain behaviors were developed by the researcher on the bases of literature and patient observation. This tool consists of 18 behaviors seperated into two major groups : mutually exclusive and concomittent behaviors. The mutually exclusive behaviors included coding cathegories for 6. body motions assumed by the subjects during the observation session. These 6 standardized motions consisted of sitting from standing first, and serially tying down, reclining, sitting again, and then standing, 6 steps walking. Concomittent behaviors consisted of 12 observable patterns that can be observed systematically from the face, grimacing, bracing, rubbing, walking with arms fixed, support with hands on sitting or standing, guarded movement, limping, unbalaced weightbearing, stopped movement from tying position to sitting, sighing and graoning. Subjects were videotrecorded as they performed a 6-standardized sequence of motions, simultanously researcher measured the time spent performing each motion and step length. Patients were asked torate their subjective pain score on the 10 mm graphic rating scale ranging from 'no pain' to 'sever pain'. For scoring of the pain behaviors, two trained nursing officiers independently and simutanously viewwd each videorecording and checked subject 'pain behaviors at the observational item checklist. The result of the study are summarized as follows : 1. Reability of the observational tool was a=.845. 2. Spearman's rho and percentage agreement were p=.97 and 81.7 persent respectively, that indicate adequate interrater reability of this tool. 3. The sensitivity rate of the tool was .875 while specificity rate .866 for differentiating patient from the normal. 4. When difference in the objective pain indices between patient group and control were compared, there was significant difference of all indices, such as pain behavior(t=7.71, p=.0001). spent time performing motion(t=14.2, p=.0001), step length (t=-10.72, p=.0001). 5. There were differences in the objective indices the subjective pain subgroups (low, medium, high). Differences in the mean score of objective pain behavior (F=6.376. p=.005) and spent time for moyion(F=4.631, p=.018). But there were no significant differences in the step length among the subgroups(F=.667, p=.521). 6. Highly correlated pain behavior items wiyh subjective pain score were 'stopped movement from lying position to sitting', 'limping', 'support with hands on sitting or standing', 'bracing', 'guarding' and 'walking with arms fixed'. In summary, although some of rho behavior items such as sighing and groaning in this study could not be observed because of videotaped datd, the reliability and validity of the over all observation method were satifactory. Thus, the results of the present study demonstrate rye potetional utility of the tool in assessing objective pain complementing self-reported pain in low back pain patients.

• 한국항해학회지
• /
• 제21권3호
• /
• pp.1-18
• /
• 1997

From the beginning of 1990s , also in the shipping industry, especially liner shipping industry competition has been more intensive and difference of the service quality among shipping companies has been learned . On the other hand, a shipping company has some limitations to do its international mission for itself just by broadening service area. For this reason, the necessity for the global strategi alliance among the shipping companies, which is orginally aimed at sharing of facilities and organixation, has been developed. Through strategic alliance, liner shipping companies do not need to input the additional capitals to increase the material assets such as vessel capacity and spread the risk by the enlargement of the market. Also, they can secure the competitive edge through efficient utilizaton of assets. The purpose of strategic alliance of Hanjin Shipping Ltd., can be summarized as follows ; broadening of service area, cost reduction through vessel sharing, realization of rationalized shipping service by terminal and equipment or facilities sharing. Liner strategic alliances are agreement among liner companies to pol their equipment , andterminals for joint operations and services in which each alliance partner continues to serve its market using jointly operated or used inland feeders,inland terminals, port terminals, and mainline fleets of ship as well as joint pools of containers and equipment. Strategic alliances are generally more formal agreements than consortia and impose longer term and far reaching obligation on their members. It also acts as one in developing and advancing the strategic aims of the alliance members. The most important objective for liner strategic alliances is cost reduction and improvement in capital asset utilization. Main aims of strategic alliance drawn in this paper, can be enumerated follows : 1. improvements in service frequency and quality : 2. improvements in vessel and equipment utilization and thereby reductions in fixed and variable cost ; 3. improvements in market shares and high value cargo booking ; 4. reductions in intermodal storage and port terminal throughput costs ; 5. improvements in negotiating powers with ports and feeder transport providers ; 6. reduction in financial and other fixed costs such as insurance; 7. coordination and integration of MIS and EDI systems and service for greater efficiency and market penetration ; and, 8. improvements in logistic chain management and economic of scale by equipment depot, terminal, and vessel sharing.

• 방송공학회논문지
• /
• 제10권3호
• /
• pp.270-285
• /
• 2005

해상도 변환모듈과 움직임 예측모듈은 트랜스코더를 이루는 중요한 모듈이다. 본 논문에서는 트랜스코더 시스템의 이 두 가지 모듈을 공동 최적화하는 기법을 제안한다. 제안하는 기법은 먼저 주어진 움직임 벡터에 대해 해상도 변환모듈을 최적화한 후, 최적화된 해상도 변환모듈에 대해 최적의 움직임 벡터를 결정한다. 기존 해상도 변환 기법들은 한 영상에 대해 변환함수를 최적화하여 사용한다. 본 논문에서는 해상도 변환 최적화를 위하여 적응적 3차 회선 변환기를 제안한다 제안된 방법은 3차 회선 변환기의 인자값을 각 매크로블록 단위로 영상의 지역적 특성을 고려하여 적응적으로 조절한다. 움직임 예측모듈에서는 기존의 고속 트랜스코더 알고리듬에서 많이 연구된 움직임 벡터의 재사용 기법을 사용하였다. 입력 영상의 움직임 벡터를 재사용 함으로써 연산량을 줄일 수 있고 이를 기본 움직임 벡터로 사용해 작은 영역에서 재탐색해 움직임벡터를 결정할 경우 전역탐색기법과 거의 동일한 화질의 영상을 얻을 수 있다. 해상도 변환모듈과 움직임 예측모듈의 공동 최적화를 통해서 트랜스코딩된 영상의 화질 열화를 최소화할 수 있는 알고리듬을 제안한다. 실험 결과 본 논문에서 제안하는 공동 최적화 기법이 기존에 연구 되었던 다른 기법에 비해 화질의 열화가 적은 것을 알 수 있었고, 이를 통해 다른 기법과 비교해 해상도 변환으로 인한 정보의 손실이 가장 적음을 알 수 있다.

• 대한치과보철학회지
• /
• 제23권1호
• /
• pp.39-59
• /
• 1985

The purpose of this study was to investigate how gap distances of 0.13mm, 0.15mm, 0.20mm, and 0.30mm affects solder joint strength from gold alloys and nickel-chromium base alloys and to examine the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys. The tensile test specimens were prepared in the split stainless steel mold with a half dumbbell shape 2.5mm in diameter and l2mm in length. 6 pairs of specimens of each gap distance group of gold alloys and nickel-chromium base alloys were made and 48 pairs of all specimens were soldered with solder gold of 666 fineness. All soldered specimens were machined to a uniform diameter and then a tensile load was applied at a cross-head speed of 0.10mm/min using Instron Universal Testing Machine, Model 1115. The fractured specimens at solder gold of solder joint fracture with each gap distance of 0.13mm, 0.15mm, 0.20mm, and 0.30mm were examined under the Scanning Electron Microscope, JSM-35c and the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys was analyzed by Electron Probe Micro Analyzer. The results of this study were obtained as follows: 1. In case of soldering of gold alloys, the tensile strength between gold alloys showed $37.33{\pm}2.52kg/mm^2$ at 0.13, $39.14{\pm}3.35kg/mm^2$ at 0.15mm, $43.76{\pm}2.97kg/mm^2$ at 0.20mm, and $49.18{\pm}4.60kg/mm^2$ at 0.30mm. There was statistically significant difference at each gap distance, and so the greater increase of gap distance showed the greater tensile strength. 2. In case of soldering of nickel-chromium base alloys, the tensile strength between nickel-chromium base alloys showed $34.84{\pm}4.26kg/mm^2$ at 0.13mm, $37.25{\pm}2.49kg/mm^2$ at 0.15mm, $42.91{\pm}4.32kg/mm^2$ at 0.20mm, and $46.93{\pm}4.21kg/mm^2$ at 0.30mm. There was not statistically significant difference only between 0.13mm and 0.15mm and bet ween 0.20 mm and 0.30mm, but generally the greater increase of gap distance showed the greater tensile strength. 3. The greater increase of gap distance shoed less porosities in solder gold at solder joint fracture. 4. In solder gold Au, Cu, Ag, Zn, and Sn were composed and Au and Cu were mostly distributed uniformly. 5. In solder joints of solder gold and gold alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Au, Cu, Ag, Pt, and Pd were composed in gold alloys. Au and Cu of solder gold and gold alloys were mostly distributed uniformly and the diffusion of other elements except Pt and Pd around the solder joint was not almost found. In solder joints of solder gold and nickel-chromium base alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Ni, Cr, and Al were composed in nickel-chromium base alloys. Au and Cu of solder gold and Ni and Cr of nickel-chromium base alloys were mostly distributed uniformly and the diffusion of other elements except Cr around the solder joint was not almost found.

• 한국화재소방학회논문지
• /
• 제27권2호
• /
• pp.54-61
• /
• 2013

항공기에 의한 산불공중진화는 지상진화 보다 진화의 효과성이 좋다. 따라서 공중진화는 산불의 대형화를 방지하는데 중요하다. 미국에서는 고정익항공기 및 회전익항공기(헬리콥터)가 합동으로 공중진화를 하나 우리나라는 회전익항공기만을 이용하고 있다. 따라서 헬리콥터에 의한 공중진화의 효과성에 대한 연구가 필요하다. 공중진화의 효과성은 투하되는 물의 분포형태와 범위에 따라서 결정된다. 따라서 본 연구는 산림청에서 운용하는 S-64E, Ka-32T, AS350B2의 3개 기종으로 물투하 실험을 실시하여 유효 분포형태와 범위를 도출하였다. 이 연구 결과로 조종사들이 공중진화의 효과성을 증대시키는데 기여하고자 한다.

• 대한족부족관절학회지
• /
• 제1권1호
• /
• pp.51-58
• /
• 1997

The purpose of this study is to evalute the efficacy af the Ilizarov external fixation for the surgical treatment. of the tibial plafond fractures. We reviewed retrospectively fourteen cases of tibial plafond fractures with moderate to severe soft. tissue damage, which were fixed with Ilizarov external fixator. Using the AO Muler classification, there were four Type C1 fractures, six Type C2 and four Type C3. In most, of the cases, the ankles were operated on with other associated fractures within a few days after injury. We reduced the fracture indirectly by soft issue taxis and fixed externally across the ankle joint. using the circular external fixator with tensioned wires and ankle hinge. In cases of inadequate closed reduction, we applied limited open reduction and internal fixation. Range of motion exercise began immediately. Postoperative follow-up averaged fourteen months (ranges, 8-30 months). Overall clinical results rated good or excellent in 7 cases, fair in 4 and poor in 3. There were three cases of pin tract infection which were resolved with short-term antibiotics and local care; one delayed wound closure in a patient. whose fracture was associated with Type III open wound; one wound slough in a patient associated with Type II open wound, which was closed later by skin graft; and one osteoarthritis. From this review, we concluded that cross-ankle circular external fixation with tensioned wires with or without. limited open reduction is a reasonable alternative for the treatment of the tibial plafond fractures with severe soft tissue damage.

• 대한가정학회지
• /
• 제39권10호
• /
• pp.97-109
• /
• 2001

It is thought that a composition of trousers is related to fabrics with single breadth. Therefore, trousers are designed with pattern using this fabrics with single breadth. However, in the old pattern of trousers, the breadth of 33cm-35cm was not considered in designing patterns. In this context, deciding which pattern design is better is not easy as there are a variety of estimation methods. So in this study, standardization of drafting is pursued by an objective pattern design. For this, a base angle of the trouser closely relating to a form and function was measured and using the height and the base angle, a trouser pattern design was tried. For a measurement of the base angle, 5 subject were selected. They are 25-29 year-old male graduates with fine physical standard. The base angle was measured with symphysis pubis point as a standard when subjects sat with their legs crossed, when they stood with their legs open (not forced artificially) and when they laid down with their legs open. The distance between a knee inside joint and knees was measured three times and the resultant value was used for the pattern design. For a design of trousers, the height was applied and the base angle was fixed. As a pattern drawing, using the height, a base angle and circumference of the hip, a trouser was designed. The production method for the pattern design is as follow: (1) The length formula, is height + $\frac{height}{2}$ (2) The hip girth formula is $\frac{hipgirth}{2}$ - $\frac{hipgirth}{20}$(3) A crotch angle is fixed at $72^{\circ}$. (4) The ratio of outer leg length to leg width is 5 : 8. (5) The component ratio of the upper outer leg length to the pant length is 5 : 8. (6) The ratio of the division point of front right inner leg length and left inner width to upper outer leg length is 5 : 8.