• Geomechanics and Engineering
• /
• 제6권3호
• /
• pp.293-320
• /
• 2014

In this study, in order to evaluate adequacy of considering local site effect, excluding soil-structure interaction (SSI) effects in inelastic dynamic analysis and design of mid-rise moment resisting building frames, three structural models including 5, 10, and 15 storey buildings are simulated in conjunction with two soil types with the shear wave velocities less than 600 m/s, representing soil classes $D_e$ and $E_e$ according to the classification of AS1170.4-2007 (Earthquake actions in Australia) having 30 m bedrock depth. Structural sections of the selected frames were designed according to AS3600:2009 (Australian Standard for Concrete Structures) after undertaking inelastic dynamic analysis under the influence of four different earthquake ground motions. Then the above mentioned frames were analysed under three different boundary conditions: (i) fixed base under direct influence of earthquake records; (ii) fixed base considering local site effect modifying the earthquake record only; and (iii) flexible-base (considering full soil-structure interaction). The results of the analyses in terms of base shears and structural drifts for the above mentioned boundary conditions are compared and discussed. It is concluded that the conventional inelastic design procedure by only including the local site effect excluding SSI cannot adequately guarantee the structural safety for mid-rise moment resisting buildings higher than 5 storeys resting on soft soil deposits.

• Transactions on Electrical and Electronic Materials
• /
• 제17권3호
• /
• pp.129-133
• /
• 2016

Theoretical and graphical analysis of pull-in-voltage and figure of merit for a fixed-fixed capacitive Micro Electromechanical Systems (MEMS) switch is presented in this paper. MEMS switch consists of a thin electrode called bridge suspended over a central line and both ends of the bridge are fixed at the ground planes of a coplanar waveguide (CPW) structure. A thin layer of dielectric material is deposited between the bridge and centre conductor to avoid stiction and provide low impedance path between the electrodes. When an actuation voltage is applied between the electrodes, the metal bridge acquires pull in effect as it crosses one third of distance between them. In this study, we describe behavior of pull-in voltage and figure of merit (or capacitance ratio) of capacitive MEMS switch for five different dielectric materials. The effects of dielectric thicknesses are also considered to calculate the values of pull-in-voltage and capacitance ratio. This work shows that a reduced pull-in-voltage with increase in capacitance ratio can be achieved by using dielectric material of high dielectric constant above the central line of CPW.

• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.648-657
• /
• 2002

This paper presents a numerical analysis on the solidification characteristics in twin-roll strip casting. Unstructured fixed-grid system was employed to deal with phase change. Melting of pure gallium was analyzed to confirm the validity of present program in both structured and unstructured grid systems. An algorithm for simultaneous calculation of the temperature in the roll and the molten metal pool was developed. The flow field in the pool and heat transfer features between pool and roll were shown. The effect of process parameters was also studied. Since the geometry of the molten metal Pool significantly deforms along the casting direction, unstructured grid system is more efficient. The unstructured grid system gives almost the same accuracy, even though the number of grids is only 60% of the structure done.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.283-285
• /
• 2004

In this paper an important class of problems in welding which come under the category of phase change is considered, Solidification and melting are important process in welding field. Phase change problems are accompanied by either absorption or release of thermal energy i,e, heat transfer process. This is complicated by the release or absorption of the latent heat of fusion at the solid-liquid interface. In this study the liberation of latent heat is taken in to account using fixed grid method. The numerical simulation and the finite element codes for the heat transfer analysis including the latent heat term has been developed based on this fixed grid method.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.49-56
• /
• 2009

This paper shows the characteristic analysis of single-phase line start permanent magnet (LSPM) motors considering the overhang structure. To achieve the low-cost design of an LSPM motor, the overhang structure is adapted for the rotor with a constraint of a fixed magnet volume. To obtain the dynamic and steady performance of the motor, the circuit parameters are extracted using the 3D-static FEM(Finite Element Method) and the d-q equivalent circuit is used. The performance of the model with overhang is compared with the conventional model without overhang on the condition that both models have a fixed volume for the permanent magnet.

• 한국항행학회논문지
• /
• 제20권6호
• /
• pp.503-510
• /
• 2016

최근 이동형 글로벌 광대역 통신 및 위성기반의 양방향 인터넷 서비스에 대한 수요가 증가함에 따라 ESIM (earth station in motion)이라는 새로운 형태의 위성 터미널이 개발되고 있다. 이 서비스는 ITU-R Resolution 158(WRC-15)에서 FSS 업링크에 27.5-29.5 GHz 대역사용을 고려하고 있어 동일대역에서 1순위 업무로 분배된 FS와의 간섭분석에 대한 연구가 요구되고 있다. 이에 본 논문에서는 ESIM이 기존의 FS(fixed service)에 미치는 간섭영향을 안테나의 포인팅 에러와 방위각을 고려하여 4 가지 시나리오에 대해 분석하였다. 그 결과 에러 초과확률 5% 및 10% 기준에서 앙각이 $20^{\circ}{\sim}40^{\circ}$에 따라 두 시스템간의 분리거리는 32~52 km 정도 요구되고 있다. 이에 분리거리를 최소화하면서 동일대역의 FS를 보호하기 위해서는 안테나 포인팅 에러뿐만 아니라 이동 터미널의 방위각을 제어할 수 있어야 한다.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.293-301
• /
• 2013

The purpose of this study is to introduce the limit of previously used six sigma quality process evaluation metrics, $Z_{st}$ and $P_{pk}$, and a solution to overcome this drawback by using a metric based on performance evaluation of Z-factor quality innovation. Case analysis on projects from national six sigma contest from 2011 to 2012 is performed and literature review on new drug development HTS (High Throughput Screening) is used to propose innovative performance evaluation metrics. This research shows that experimental study on six sigma evaluation metric, $Z_{st}$ and $P_{pk}$, have no significance difference between industrial type (Manufacturing, Semi-Public Institute, Public Institute) and CTQ type (Product Technology Type CTQ, Process Technology Type CTQ). Following discovery characterize this quality improvement as fixed target type project. As newly developed moving target type of quality innovation performance metric Z-Factor is used for evaluating experimental study, hypothetical analysis suggests that $Z_{st}$ and $P_{pk}$ share different relationship or even show reciprocal relationship. Constraints of the study are relatively small sample size of only 37 projects from past 2 years and conflict on having interview and communication with six sigma quality practitioner for qualitative experimental study. Both moving target type six sigma innovation project and fixed target type improvement project or quality circle enables efficient ways for a better understanding and quality practitioner use by applying quality innovation performance metric. Downside of fixed target type quality performance evaluation metric, $Z_{st}$ and $P_{pk}$, is presented through experimental study. In contrast, advantage of this study is that high throughput requiring product technology, process technology and quantum leap typed innovation effect is evaluated based on precision and accuracy and Z-Factor that enables relative comparison between enterprises is proposed and implemented.

• 기술혁신학회지
• /
• 제21권2호
• /
• pp.663-683
• /
• 2018

본 연구는 우리나라 중소기업 R&D 조세지원의 효과성을 분석하고, 중소기업 R&D 활성화를 촉진할 수 있는 조세지원제도 개선방안을 도출하고자 하였다. 이를 위하여 최근 3년간 기업별 조세감면액 자료에 고정효과 모형(Fixed Effect Model)과 확률효과 모형(Random Effect Model), 그리고 패널 음이항모형(Panel Negative Binomial Model)을 적용하여 분석을 수행하였다. 분석 결과, 동일 규모의 재정을 투입하는 경우 R&D 조세감면이 R&D 직접지원에 비해 R&D 투자 제고효과는 5.3배, 연구원 수 증가효과는 4.3배 높은 것으로 나타났다. 지역별로는 비수도권 소재 기업에서 조세감면의 효과가 직접 지원보다 높게 나타났다. 이를 바탕으로 중소기업 R&D 활성화를 위해 창업 중소기업의 미사용 R&D 세액공제액의 세금 포인트 전환, 중소기업의 R&D설비투자 비용에 대한 최저한세 적용 배제, R&D 세액공제 제도의 통합 운영 등의 개선방안을 제시하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.297-302
• /
• 1999

Finite element analysis is peformed about the crack propagation in half-space due to sliding contact. The analysis is based on linear elastic fracture mechanics and stress intensity factor concept. The crack location is fixed and the friction coefficient between asperity and half-space is varied to analyze the effect of surface friction on stress Intensity factor for horizontal crack. The crack propagation direction is predicted based on the maximum range of shear and tensile stress intensity factor.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권2호
• /
• pp.169-174
• /
• 2010

A meta-analysis was conducted to summarize the results of studies which have described the profiles of hormones during the oestrous cycle in buffalo using a fixed effect model and a random effect model. Plasma progesterone concentrations were lowest (0.30${\pm}$0.06 ng/ml) during the peri-oestrous phase and increased (p = 0.067) through the early luteal phase to a maximum concentration (1.94${\pm}$0.03 ng/ml) during the mid-luteal phase. Circulating plasma inhibin and estradiol concentrations were lowest (0.31${\pm}$0.01 and 11.04${\pm}$0.13 ng/ml) during the mid-luteal phase, increased through the late luteal phase to maximum concentrations (0.44${\pm}$0.02 and 22.48${\pm}$0.32 ng/ml) during the peri-oestrous phase. Plasma FSH concentrations were lowest during the early luteal phase and increased through the mid-luteal phase to a maximum concentration during the peri-oestrous phase. Peripheral prolactin concentrations were lowest during the late luteal phase and increased to a maximum concentration during the peri-oestrous phase which then declined (p = 0.716) during the early luteal phase. Peripheral plasma cortisol concentrations decreased from 2.68${\pm}$0.14 ng/ml during the early luteal phase to 1.43${\pm}$0.27 ng/ml during the mid-luteal phase (p<0.001) which then increased to 2.06${\pm}$0.17 ng/ml during the late luteal phase. Plasma $T_{5}$ concentrations decreased from the late luteal phase to the peri-oestrous phase (p<0.001) which then increased during the early luteal phase. $T_{4}$ concentrations increased from the late luteal phase to the peri-oestrous phase which then decreased during the early luteal phase.