• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.410-418
• /
• 2021

This study was conducted in 8.2m wide single-span greenhouse to investigate the effect of presence or absence of rafter steel pipe joint and foundation conditions on greenhouse structural performance. Structural performance was evaluated by static loading test using the structural performance evaluation system for single-span greenhouse. The measured displacement was compared with the predicted result by numerical analysis. The displacement of each measurement location showed a significant difference regardless of the conditions of the foundation and presence or absence of rafter steel pipe joint. Compared to the hinge conditions, the difference in structural performance of the greenhouse in the fixed conditions was seen to be relatively large. The difference in structural performance according to presence or absence of rafter steel pipe joints, the lateral stiffness of the joint was 8.1% greater.

• Journal of Korea Trade
• /
• v.25 no.7
• /
• pp.92-107
• /
• 2021

Purpose - This paper analyzes the relationship between trade facilitation and agricultural products exports and estimates the effects of trade facilitation in importing countries on Chinese agricultural products exports, which is of great significance for promoting agricultural trade between China,Japan and Korea and the governments of the three countries to formulate targeted trade facilitation policies. Design/methodology - Based on Wilson (2003) theoretical framework, this paper sets up its own trade facilitation level measurement system by involving four primary indicators and fifteen secondary indicators to evaluate the trade facilitation levels of Japan and Korea from 2011 to 2018 respectively. The paper selected the data on China's agricultural exports at the HS4 level from 2011-2018 and used a fixed-effects model to estimate the effect of changes in trade facilitation levels in trading partner countries on China's agricultural trade. Findings - Our main findings can be summarized as follows: the level of trade facilitation in importing countries has a significantly positive effect on China's agricultural exports. The higher the level of trade facilitation in trading partner countries, the more Chinese agricultural exports trade, i.e. for every 1 percentage point increase in the level of trade facilitation, the volume of exports will increase by 2.299%.The sub-sample test shows that China's main agricultural products exported to Japan and Korea, such as aquatic products, vegetables, fruits and other perishable fresh products, are particularly significantly affected by the level of trade facilitation. Originality/value - First, from the innovation of the research perspective, which is different from the analysis of the existing paper on the overall trade facilitation of all traded commodities. This article is based on the close trade relations between China, Japan and Korea, and the particularity of agricultural products, from the perspective of China's agricultural exports to Japan and Korea, discuss the impact of importing countries-Japan and Korea's trade facilitation levels on China's agricultural exports;Secondly, in this paper, the hierarchical data of the HS4 quartile is used to avoid the information loss of the industry, and to analyse the impact of the importing country's trade facilitation level on the export of different types of agricultural products more scientifically.

• International Area Studies Review
• /
• v.15 no.3
• /
• pp.471-491
• /
• 2011

This study is to analyze the determinants of inflow FDI with panel data of 12 provinces in western region of China for the period, 1990-2007, from the perspective of market-oriented FDI and production-efficiency-oriented FDI. The empirical findings are following. First, the empirical results prior to the start of western development program show that the GRDP, the intense of industrialization and university graduates per 10,000 residents have positive coefficient signs at the significant level, while wage level has a negative and significant value. Second the empirical results using the data after the launching of the western development program show that the GRDP, the intense of industrialization have positive relations with FDI, while openness in terms of the ratio of international trade to GRDP and the wage level have negative coefficients. Finally, this thesis finds that the empirical results for both periods are very similar, which suggest that the economic structure in western region has not changed significantly even though almost a decade passed since the western development program launched.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.1
• /
• pp.14-22
• /
• 2019

Objective: The aim of the study was to find a possible association between the ${\beta}-$ and ${\kappa}-casein$ and ${\beta}-lactoglobulin$ genotypes and important milk physiochemical and technological characteristics such as acidity, alcohol stability, the contents of some minerals and the parameters of acid fermentation ability (FEA) in Czech Fleckvieh Cattle. Methods: Milk and blood samples were collected from 338 primiparous Czech Fleckvieh cows at the same stage of lactation. The genotypes of individual cows for ${\kappa}-casein$ (alleles A, B, and E) and ${\beta}-lactoglobulin$ (alleles A and B) were ascertained by polymerase chain reaction-restriction fragment length polymorphism, while their ${\beta}-casein$ (alleles $A^1$, $A^2$, $A^3$, and B) genotype was determined using melting curve genotyping analysis. The data collected were i) milk traits including active acidity (pH), titratable acidity (TA), alcohol stability (AS); calcium (Ca), phosphorus (P), sodium (Na), magnesium (Mg), and potassium (K) contents; and ii) yoghurt traits including active acidity (Y-pH), titratable acidity (Y-TA), and the counts of both Lactobacilli and Streptococci in 1 mL of yoghurt. A linear model was assumed with fixed effects of herd, year, and season of calving, an effect of the age of the cow at first calving and effects of the casein and lactoglobulin genotypes of ${\beta}-CN$ (${\beta}-casein$, CSN2), ${\kappa}-CN$ (${\kappa}-casein$, CSN3), and ${\beta}-LG$ (${\beta}-lactoglobulin$, LGB), or the three-way interaction between those genes. Results: The genetic polymorphisms were related to the milk TA, AS, content of P and Ca, Y-pH and Lactobacilli number in the fresh yoghurt. The CSN3 genotype was significantly associated with milk AS (p<0.05). The effect of the composite CSN2-CSN3-LGB genotype on the investigated traits mostly reflected the effects of the individual genes. It significantly influenced TA (p<0.01), Y-pH (p<0.05) and the log of the Lactobacilli count (p<0.05). Conclusion: Our findings indicate that the yoghurt fermentation test together with milk proteins genotyping could contribute to milk quality control and highlight new perspectives in dairy cattle selection.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.478-482
• /
• 2021

The catalytic yields of partial oxidation of methane (POM) to hydrogen over Ln(1)-Ni(5)/SBA-15 (Ln = Dy, Eu, Pr, and Tb) were investigated in a fixed bed flow reactor under atmosphere. As 1 wt% of Eu was added to Ni(5)/SBA-15 catalyst, the O1s and Si2p core electron levels of Eu(1)-Ni(5)/SBA-15 showed the chemical shift by XPS. XPS analysis also demonstrated that the atomic ratio of O1s, Ni2p_3/2, and Si2p increased to 1.284, 1.298, and 1.058, respectively, and exhibited O^-, and O^2- oxygen and metal ions such as Eu³⁺, Ni⁰, Ni²⁺, and Si⁴⁺ on the catalyst surface. The yield of hydrogen on the Eu(1)-Ni(5)/SBA-15 was 57.2%, which was better than that of Ln(1)-Ni(5)/SBA-15 (Ln = Dy, Pr, and Tb), the catalytic activity was kept steady even 25 h. As 1 wt% of Eu was added to Ni(5)/SBA-15, the oxygen vacancies caused by strong metal-support interaction (SMSI) effect due to the strong interaction between metals and carrier are made. They are resulted in increasing the dispersion of Ni⁰, and Ni²⁺ nano particles on the surface of catalyst, and are kept catalytic activity.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.22 no.2
• /
• pp.107-116
• /
• 2022

Background: Pain during fixed orthodontic treatment can have a detrimental effect on patient treatment compliance. To overcome this, there is a definite need to establish the best pain-relieving methods suitable for orthodontic patients in terms of efficacy and use. The objective of this study was to compare the effect of chewing gum and pre-emptive tenoxicam on pain after initial archwire placement and to evaluate the pain perceptions of orthodontic patients in the two groups while performing various functions at specific time intervals. Methods: Forty-two patients were selected and randomly divided into two groups: group A (chewing gum) and group B (pre-emptive tenoxicam). Pain perception was documented by patients immediately; at 4 h; at bedtime on the day of archwire placement; the next morning; at 24 h; and at bedtime on the 2nd, 3rd, and 7th day after the initial archwire placement. Pain scores were noted during fitting of the posterior teeth, biting, and chewing using a visual analog scale. The data obtained were subjected to statistical analysis. Results: Group A showed a significant increase in pain until the next morning while fitting the posterior teeth, biting, and chewing [36.2, 52.0, 33.4, respectively]], followed by a gradual decrease by the 7th day. Group B showed a significant increase in pain at bedtime on biting, with a peak value of 47.5. Pain on chewing, fitting posterior teeth, peaked the morning of the next day (100.0, 45.0). The Freidman test showed a statistically significant difference with a p-value of < 0.01. Higher pain scores were observed while chewing and biting compared with that while fitting the posterior teeth in both groups. The overall comparison of pain control between the two groups was not statistically significant [P > 0.05] between the two groups. Conclusions: Chewing gum was not inferior to pre-emptive tenoxicam. Thus, chewing gum is a non-pharmacological alternative to analgesics for orthodontic pain control that eliminates the chance of adverse reactions and can be used in the absence of adult observation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.3
• /
• pp.206-211
• /
• 2018

Purpose: Recently, a method of forming a slot in the prosthesis lingual has been introduced to solve the occlusal and aesthetic disadvantages of screw-retained prosthesis in the manufacture of implant-fixed prosthesis and to ensure retrievability in cement retained prostheses. The purpose of this study is to investigate the effect of the internal gap on the removal of the prosthesis in the preparation of cement-retained implant prostheses with lingual slots. Materials and methods: Titanium abutment and internal gap of the zirconia prosthesis to be attached to the upper part were set to 30, 35, and $50{\mu}m$, respectively. Three for each type total 15 were produced for each type. The zirconia prosthesis formed a retrievable cement-type slot with a space of 1 mm at the location where the titanium abutment meets the shelf area. Autocatalytic resin cement was used for bonding of abutment and zirconia prosthesis, and the maximum removal stress value was measured in units of Ncm by using the customized equipment of the cemented specimen. The Kruskal-Wallis test was used to compare the three groups by statistical analysis (${\alpha}=.05$), modified by post hoc test the Mann-Whitney U-test and the Bonferroni correction method were used to compare the two methods (${\alpha}=.017$). Results: There was no statistically significant difference in removal stress between the $30{\mu}m$ group and the $35{\mu}m$ group in the internal gap (P = .032), and there was a significant difference between the $30{\mu}m$ group and the $50{\mu}m$ group, between the $35{\mu}m$ group and the $50{\mu}m$ group (P < .017). Conclusion: Thus, the internal gap of computer-aided design affected the retention between the zirconia prosthesis and the titanium abutment.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.145-153
• /
• 2009

The purpose of this study was to evaluate the effect of instrument compliance on the polymerization shrinkage stress measurements of dental composites. The contraction strain and stress of composites during light curing were measured by a custom made stress-strain analyzer, which consisted of a displacement sensor, a cantilever load cell and a negative feedback mechanism. The instrument can measure the polymerization stress by two modes: with compliance mode in which the instrument compliance is allowed, or without compliance mode in which the instrument compliance is not allowed. A flowable (Filtek Flow: FF) and two universal hybrid (Z100: Z1 and Z250: Z2) composites were studied. A silane treated metal rod with a diameter of 3.0 mm was fixed at free end of the load cell, and other metal rod was fixed on the base plate. Composite of 1.0 mm thickness was placed between the two rods and light cured. The axial shrinkage strain and stress of the composite were recorded for 10 minutes during polymerization. and the tensile modulus of the materials was also determined with the instrument. The statistical analysis was conducted by ANOVA. paired t-test and Tukey's test (${\alpha}<0.05$). There were significant differences between the two measurement modes and among materials. With compliance mode, the contraction stress of FF was the highest: 3.11 (0.13). followed by Z1: 2.91 (0.10) and Z2: 1.94 (0.09) MPa. When the instrument compliance is not allowed, the contraction stress of Z1 was the highest: 17.08 (0.89), followed by FF: 10.11 (0.29) and Z2: 9.46 (1.63) MPa. The tensile modulus for Z1, Z2 and FF was 2.31 (0.18), 2.05 (0.20), 1.41 (0.11) GPa, respectively. With compliance mode. the measured stress correlated with the axial shrinkage strain of composite: while without compliance the elastic modulus of materials played a significant role in the stress measurement.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.157-165
• /
• 2011

With respect to the trend of highway traffic accident, highway accident is in decline, whileas, the fatality is on an increasing trend. Thus, many efforts to decrease highway traffic accidents and improve the safety, are required. In particular, in case of highway, the management standard by grade for accident black spot is designated. Thus, investing the effect factors by grade for highway traffic accident is required in detail. Thus, in this study, the factors affecting the traffic accidents among the environmental factors based on the graded data for the accident black spot in the applicable section targeting the Seoul-Pusan Express Highway, were reviewed; accident forecasting model which would analyze the characteristics of the accidents for determining the accident grade, was developed. As a result of establishing a model by using Quantification Theory of Type II, considering the characteristics of the dependent and independent variables based on the geometric structure, 'the fixed variable' among the variables relating to the accident, for the variables influencing over the accident grade, 'the type of vans, a chassis and people', 'the trailers, special vehicles and chassis people' and 'the negligence of watching and cloudy weather' were analyzed as common factors, in case of 'horizontal alignment', 'longitudinal slope' and, 'barricade' respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.11
• /
• pp.1514-1524
• /
• 2011

A total of 4,752 monthly lactation records of Friesian cows during the period from 2000 to 2005 were used to estimate genetic parameters and to determine the effect of udder health on milk production traits. Three milk production traits were studied: 305-day milk yield (305-dMY), 305-day fat yield (305-dFY) and 305-day protein yield (305-dPY). Four udder health traits were studied: somatic cell count (SCC), mastitis (MAST), udder health status (UDHS) with 10 categories and udder quarter infection (UDQI) with 7 categories. Mixed model least square analysis was used to estimate the fixed effects of month and year of calving and parity (P) on different studied traits. Sire and dam within sire were included in the model as random effects. Data were analyzed using Multi-trait Derivative Free Restricted Maximum Likelihood methodology (MTDFREML) to estimate genetic parameters. Unadjusted means of 305-dMY, 305-dFY, 305-dPY and SCC were 3,936, 121, 90 kg and 453,000 cells/ml, respectively. Increasing SCC from 300,000 to 2,000,000 cells/ml increased UDQI from 5.51 to 23.2%. Losses in monthly and lactationally milk yields per cow ranged from 17 to 93 and from 135 to 991 kg, respectively. The corresponding losses in monthly and lactationally milk yields return per cow at the same level of SCC ranged from 29.8 to 163 and from 236 to 1,734 Egyptian pounds, respectively. Heritability estimates of 305-dMY, 305-dFY, 305-dPY, SCC, MAST, UDHS, UDQI were 0.31${\pm}$0.4, 0.33${\pm}$0.03, 0.35${\pm}$0.05, 0.23${\pm}$0.02, 0.14${\pm}$0.02, 0.13${\pm}$0.03, and 0.09${\pm}$0.01, respectively. All milk production traits showed slightly unfavorable negative phenotypic and genetic correlations with SCC, MAST, UDHS and UDQI. There were positive and high genetic correlations between SCC and each of MAST (0.85${\pm}$0.7), UDHS (0.87${\pm}$0.10) and UDQI (0.77${\pm}$0.06) and between MAST and each of UDHS (0.91${\pm}$0.11) and UDQI (0.83${\pm}$0.07). It could be concluded that the economic losses from mastitis and high SCC are considerable. The high genetic correlation between SCC and clinical mastitis (CM) suggest that the selection for lower SCC would help to reduce or eliminate the undesirable correlated responses of clinical mastitis associated with selection for increasing milk yield. Additionally, it is recommended also that if direct information on under health traits is not available, measures of SCC can be inclusion in a selection criteria to improve the income from dairy cows.