• Design & Manufacturing
• /
• v.11 no.3
• /
• pp.19-24
• /
• 2017

In these days, increase requirement of TEM (Transmission Electro Microscope) in not only scientific field but also industrial field. Because TEM can measure inner-structure of specimen a variety of materials like metal, bio. etc. When use TEM, specimen should be thin about 50nm. So making for thin specimen, use Ion milling device that include specimen holder. The holder generally made of Aluminium Aluminium holder is worn away easily. For this reason, using time of ion milling with aluminum holder is too short. To solve the problem, we replace aluminium holer to molybdenum alloy holder. In this paper, we design molybdenum alloy holer for CAM and modify CAD modeling for effective machining process. So we array a specimen 3 by 4 and setup orientation for one-shot machining process. Next we make a CAM program for machining. we making a decision two machining strategy that chose condition of tool-path method, step-down, step-over. etc. And then conduct machining using CNC milling machining center. To make clear difference between case.1 and case.2, we fixed machining conditions like feed-rate, main spindle rpm, etc. After machining, we confirm the condition of workpiece and analysis the problems case by case. Finally, case.2 work piece that superior than case.1 cutting with WEDM because that method can not ant mechanical effect on workpiece.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.265-275
• /
• 2004

In this paper, an OFDM-CDMA broadband system is considered for a possible candidate of fixed wireless broadband access network applications. With an emphasis on a preamble design for multi-channel separation, we address a channel estimation based on the time-domain windowing and its imperfectness in OFDM-based multiple-antenna transmission systems. By properly designing each preamble for multiple antennas to be orthogonal in the time domain, the channel estimation can be applied to the ETSI HlPERLAN/2 and IEEE-802.11a standards in the case of more than two transmit antennas. Also, an effect of diversity techniques on the performance of OFDM-CDMA based broadband wireless access networks is investigated and the maximum achievable diversity gain for a two-path Rayleigh fading environment is evaluated Simulation results show that the OFDM-CDMA system applying a space-time-frequency diversity with a full-rate full diversity code can give the diversity of D = 4 and D = 8 for both multi-user cases of maximum user and half user capacities, respectively.

• Restorative Dentistry and Endodontics
• /
• v.42 no.3
• /
• pp.216-223
• /
• 2017

Objectives: The aim of this study was to compare the mechanical properties of various nickel-titanium (NiTi) files with similar tapers and cross-sectional areas depending on whether they were surface-treated. Materials and Methods: Three NiTi file systems with a similar convex triangular cross-section and the same ISO #25 tip size were selected for this study: G6 (G6), ProTaper Universal (PTU), and Dia-PT (DPT). To test torsional resistance, 5 mm of the straightened file's tip was fixed between polycarbonate blocks (n = 15/group) and continuous clockwise rotation until fracture was conducted using a customized device. To evaluate cyclic fatigue resistance, files were rotated in an artificial curved canal until fracture in a dynamic mode (n = 15/group). The torsional data were analyzed using 1-way analysis of variance and the Tukey post-hoc comparison test, while the cyclic fatigue data were analyzed using the Mann-Whitney U test at a significance level of 95%. Results: PTU showed significantly greater toughness, followed by DPT and G6 (p < 0.05). G6 showed the lowest resistance in ultimate torsional strength, while it showed a higher fracture angle than the other files (p < 0.05). In the cyclic fatigue test, DPT showed a significantly higher number of cycles to failure than PTU or G6 (p < 0.05). Conclusions: Within the limitations of this study, it can be concluded that the torsional resistance of NiTi files was affected by the cross-sectional area, while the cyclic fatigue resistance of NiTi files was influenced by the surface treatment.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.65-70
• /
• 2012

Glycidyl methacrylate (GMA) was used to introduce epoxy groups on the surface of polypropylene (PP) plate, used as a substrate, through plasma-induced graft copolymerization. Emulsion polymerization was applied for graft copolymerization of GMA and was compared with conventional solution polymerization to confirm its effect. Plasma treatment conditions under one atmospheric pressure were fixed as follows; the RF power of 200 W, the treatment time of 30 sec, the Ar gas flow rate of 6 LPM, and the exposure time of treated PP samples in air of 5 min. For graft-copolymerization, GMA concentration, reaction temperature, and reaction time was optimized to maximize the grafting degree of GMA. The maximum grafting degree of GMA was obtained at the condition of 12%-GMA concentration, $90^{\circ}C$ reaction temperature, and 5 hr-reaction time. Analysis results supported that the emulsion polymerization was more effective than the solution polymerization for grafting more GMAs on the surface of PP plate under the same reaction conditions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.393-396
• /
• 2008

The study of nitrogen dilution effect on flame stability was experimentally investigated in non-premixed turbulent lifted hydrogen jet with coaxial air. hydrogen gas was used as a fuel and coaxial air was injected to make flame liftoff. And both of the fuel jet and coaxial air velocity were fixed as $u_F$=200 m/s and $u_A$=16 m/s, while nitrogen diluents mole fraction was varied from 0 to 0.2. For the analysis of flame structure and flame stabilization mechanism, the simultaneous measurement of PIV/OH PLIF had been performed. It was found that the turbulent flame propagation velocity increased as decreasing of nitrogen mole fraction. We concluded that the turbulent flame propagation velocity was expressed as a function of turbulent intensity, even though the mole fraction of nitrogen diluents gas was changed.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.3
• /
• pp.198-205
• /
• 2021

In this paper, the effect of trim variation on the required power of 11,000TEU container ship was investigated under conditions considering the actual operation speed and draft. For each draft condition, the effective power (P_E) and delivered power (P_D) trends were investigated with changes in trim and ship speed. At this time, the displacement volume was fixed same as the value of the even trim condition and the both sinkage at the fore and after perpendicular are confirmed. The test ship speeds were determined by considering the operating speed. Both numerical and experimental methods were used to analyze the effects of trim variation. Numerical analysis results were used for evaluating the resistance performance, and the self-propulsion performance was estimated using experimental data obtained from model test.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.760-766
• /
• 2018

The present study investigates the effect of PMMA and BN content on microstructure, mechanical and dielectric properties of silicon nitride($Si_3N_4$) ceramics in $Y_2O_3-Al_2O_3$ additive system. The total additive content was fixed at 8 wt.% and the amount of PMMA varies from 0 to 40 wt.% and BN varies from 0 to 36 wt.%, respectively. The crystalline phases of the samples were determined by X-ray diffraction analysis. All the sintered sample shows complete transformation of ${\alpha}$ to ${\beta}-Si_3N_4$ during the sintering process indicated that the phase transformation was unaffected by the PMMA or BN content. However, the microstructure shows that the residual porosity increased with increasing PMMA and BN content. In addition, the flexural strength and the dielectric constant decrease with addition of PMMA and BN due to the residual porosity. This article provides empirical study of design parameters for $Si_3N_4$-based radome materials.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.2
• /
• pp.193-200
• /
• 2019

Objective : Endovascular treatment (EVT) outcomes for acute M2 segment of middle cerebral artery occlusion remains unclear because most results are obtained from patients with large artery occlusion in the anterior circulation. The objective of this study was to assess procedural outcomes for acute M2 occlusion and compare outcomes according to thrombus location (M1 vs. M2). Methods : A systematic review was performed for online literature published from January 2004 to December 2016. Primary outcome was successful recanalization rate and symptomatic intracranial hemorrhage (S-ICH) after the procedure. A fixed effect model was used if heterogeneity was less than 50%. Results : Eight articles were included. EVT showed successful recanalization rate of 69.1% (95% confidence interval [CI], 54.9-80.4%) and S-ICH rate of 6.1% (95% CI, 4.5-8.3%). The rates of good clinical outcome at 3 months and mortality were 59.4% (95% CI, 49.9-68.2%) and 14.9% (95% CI, 11.4-19.3%), respectively. According to thrombus location (M1 vs. M2), successful recanalization (odds ratio [OR], 1.539; 95% CI, 0.293-8.092; p=0.610) and S-ICH (OR, 1.313; 95% CI, 0.603-2.861; p=0.493) did not differ significantly. Good clinical outcome was more evident in M2 occlusion after EVT than that in M1 occlusion (OR, 1.639; 95% CI, 1.135-2.368; p=0.008). However, mortality did not differ significantly according to thrombus location (OR, 0.788; 95% CI, 0.486-1.276; p=0.332). Conclusion : EVT seems to be technically feasible for acute M2 occlusion. Direct comparative studies between EVT and medical treatment are needed further to find specific beneficiary group after EVT in patient with M2 occlusion.

• Environmental and Resource Economics Review
• /
• v.28 no.3
• /
• pp.415-435
• /
• 2019

The purpose of this study is to analyze the returns to scale by estimating the bigeye tuna production function of Korean distant longline fisheries in WCFPC waters. In the analysis, number of crews, vessel tonnage, number of hooks, and bigeye tuna biomass are used as input variables and the catch amount of bigeye tuna is used as an output variable in the Cobb-Douglas production function. Prior to the function estimation, the biomass of bigeye tuna was estimated by the Bayesian state-space model. Results showed that the fixed effect model was selected based on the hausman test, and vessel tonnage, hooks, and biomass would have direct effects on the catch amount. In addition, it was shown that the bigeye tuna distant longline fisheries in WCFPC water would have increasing returns to scale.

• The Korean Journal of Applied Statistics
• /
• v.34 no.4
• /
• pp.589-597
• /
• 2021

In simple and multiple regression, there is a difference in the meaning of regression coefficients, and not only are the estimates of regression coefficients different, but they also have different signs. Understanding the relative contribution of explanatory variables in a regression model is an important part of regression analysis. In a standardized regression model, the regression coefficient can be interpreted as the change in the response variable with respect to the standard deviation when the explanatory variable increases by the standard deviation in a situation where the values of the explanatory variables other than the corresponding explanatory variable are fixed. However, the size of the standardized regression coefficient is not a proper measure of the relative importance of each explanatory variable. In this paper, the estimator of the regression coefficient in multiple regression is expressed as a function of the correlation coefficient and the coefficient of determination. Furthermore, it is considered in terms of the effect of an additional explanatory variable and additional increase in the coefficient of determination. We also explore the relationship between estimates of regression coefficients and correlation coefficients in various plots. These results are specifically applied when there are two explanatory variables.