• Wind and Structures
• /
• 제34권3호
• /
• pp.303-312
• /
• 2022

As wind turbine rotors increase, the overall loads and dynamic response become an important issue. This problem is augmented by the exposure of wind turbines to severe atmospheric events with unconventional flows such as tornadoes, which need specific designs not included in standards and codes at present. An experimental study was conducted to analyze the loads induced by a tornado-like vortex (TLV) on horizontal-axis wind turbines (HAWT). A large-scale tornado simulation developed in The Wind Engineering, Energy and Environment (WindEEE) Dome at Western University in Canada, the so-called Mode B Tornado, was employed as the TLV flow acting on a rigid wind turbine model under two rotor operational conditions (idling and parked) for five radial distances. It was observed that the overall forces and moments depend on the location and orientation of the wind turbine system with respect to the tornado vortex centre, as TLV are three-dimensional flows with velocity gradients in the radial, vertical, and tangential direction. The mean bending moment at the tower base was the most important in terms of magnitude and variation in relation to the position of the HAWT with respect to the core radius of the tornado, and it was highly dependent on the rotor Tip Speed Ratio (TSR).

• Journal of computational fluids engineering
• /
• 제19권4호
• /
• pp.80-85
• /
• 2014

High-volume low-speed (HVLS) fans are one category of ceiling fan installed in large enclosings such as warehouses, large barns and health clubs in order to generate comfortable air circulation. As a rotary blade, aerodynamic performance of a HVLS fan is predominantly related to its airfoil(s), and the pitch and twist angles. This paper first, investigates the effects of airfoil on the performances of three different HVLS fans with NACA 5414, 6413 and 7415 airfoils. The fans have six untwisted blades with the diameter of 6 m and rotate at 60 RPM. The blades pitch angels are $12^{\circ}$, $12^{\circ}$ and $13^{\circ}$, respectively. The results are presented in the form of the aerodynamic forces and moments, volumetric flow rate and streamlines. Regarding the volumetric flow of air, the results show that the model with NACA 7415 has the best performance. Hence, two other HVLS fans with the same airfoil but, with four and five blades are studied in order to investigate the effects of number of blades. From the point of view of air circulation still the six-bladed fan is the best one; however, the five-bladed fan is more efficient in power consumption.

• Journal of Biomedical Engineering Research
• /
• 제28권3호
• /
• pp.397-409
• /
• 2007

Owing to needs of biomechanical comprehension and analysis to obtain various medical treatment designs which are related with the spine in order to cure and diagnose LBP patients, the FE modeling and nonlinear analysis of lumbosacrum including a partial ilium and iliolumbar ligaments, were carried out. First, we investigated whether the geometrical configuration of vertebrae displayed by DICOM slice files is regular and normal condition. After constructing spinal vertebrae including a partial ilium, a sacrum and five lumbars (from L1 to L5)with anatomical shape reconstructed using softwares such as image modeler and CAD modeler, we added iliolumbar ligaments, lumbar ligaments, discs and facet joints, etc.. And also, we assigned material property and discretized the model using proper finite element types, thus it was completely modeled through the above procedure. For the verification of each segment, average sagittal ROM, average coronal ROM and average transversal ROM under various loading conditions(${\pm}10Nm$), average vertical displacement under compression(400N), ALL(Anterior Longitudinal Ligament) and PLL(Posterior Longitudinal Ligament) force at L12 level, strains of seven ligaments on sagittal plane at L45 level and maximal strain of disc fibers according to various loading conditions at L45 level, etc., they were compared with experimental results. For the verification of multilevel-lumbosacrum spine including partial ilium and iliolumbar ligaments, the cases with and without iliolumbar ligaments were compared with ROM of experiment. The results were obtained from analysis of the verified FE model as follows: I) Iliolumbar ligaments played a stabilizing role as mainly posterior iliolumbar ligaments under flexion and as both posterior and anterior iliolumbar ligaments of one side under lateral bending. 2) The iliolumbar ligaments decreased total ROM of 1-8% in total model according to various motion conditions, which changed facet contact forces of L5S level by approximately 0.8-1.4 times and disc forces of L5S level by approximately 0.8-1.5 times more than casewithout ilioligaments, under various loading conditions. 3) The force of lower discs such as L45 and L5S was bigger than upper discs under flexion, left and right bending and left and right twisting, except extension. 4) It was predicted that strains of posterior ligaments among iliolumbar ligaments would produce the maximum 16% under flexion and the maximum 10% under twisting. 5) It's expected that this present model applies to the development and design of artificial disc, since it was comparatively in agreement with the experimental datum.

• Wind and Structures
• /
• 제34권2호
• /
• pp.215-230
• /
• 2022

Majority of transmission line system failures at many locations worldwide have been caused by severe localized wind events in the form of tornadoes and downbursts. This study evaluates the structural response of two different transmission line systems under equivalent F2 tornadoes obtained from real incidents. Two multi-span self-supported transmission line systems are considered in the study. Nonlinear three-dimensional finite element models are developed for both systems. The finite element models simulate six spans and five towers. Computational Fluid Dynamics (CFD) simulations are used to develop the tornado wind fields. Using a proper scaling method for geometry and velocity, full-scale tornado flow fields for the Stockton, KS, 2005 and Goshen County WY, 2009 are developed and considered together with a previously developed tornado wind field. The tornado wind profiles are obtained in terms of tangential, radial, and axial velocities. The simulated tornadoes are then normalized to the maximum velocity value for F2 tornadoes in order to compare the effect of different tornadoes having an equal magnitude. The tornado wind fields are incorporated into a three-dimensional finite element model. By varying the location of the tornado relative to the transmission line systems, base shears of the tower of interest and peak internal forces in the tower members are evaluated. Sensitivity analysis is conducted to assess the variation of the structural behaviour of the studied transmission lines associated with the location of the tornado relative to the tower of interest. The tornado-induced forces in both lines due to the three different normalized tornadoes are compared with corresponding values evaluated using the simplified load case method recently incorporated in the ASCE-74 (2020) guidelines, which was previously developed based on the research conducted at Western University.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제13권5호
• /
• pp.50-56
• /
• 2014

A technique based on the finite element method (FEM) is used in the simulation of metal cutting process. This offers the advantages of the prediction of the cutting force, the stresses, the temperature, the tool wear, and optimization of the cutting condition, the tool shape and the residual stress of the surface. However, the accuracy and reliability of prediction depend on the flow stress of the workpiece. There are various models which describe the relationship between the flow stress and the strain. The Johnson-Cook model is a well-known material model capable of doing this. Low-alloy steel is developed for a dry storage container for used nuclear fuel. Related to this, a process analysis of the plastic machining capability is necessary. For a plastic processing analysis of machining or forging, there are five parameters that must be input into the Johnson-Cook model in this paper. These are (1) the determination of the strain-hardening modulus and the strain hardening exponent through a room-temperature tensile test, (2) the determination of the thermal softening exponent through a high-temperature tensile test, (3) the determination of the cutting forces through an orthogonal cutting test at various cutting speeds, (4) the determination of the strain-rate hardening modulus comparing the orthogonal cutting test results with FEM results. (5) Finally, to validate the Johnson-Cook material parameters, a comparison of the room-temperature tensile test result with a quasi-static simulation using LS-Dyna is necessary.

• The Korean Journal of Pain
• /
• 제23권3호
• /
• pp.166-171
• /
• 2010

Background: Neuropathic pain resulting from diverse causes is a chronic condition for which effective treatment is lacking. The goal of this study was to test whether dexamethasone exerts a preemptive analgesic effect with bupivacaine when injected perineurally in the spared nerve injury model. Methods: Fifty rats were randomly divided into five groups. Group 1 (control) was ligated but received no drugs. Group 2 was perineurally infiltrated (tibial and common peroneal nerves) with 0.4% bupivacaine (0.2 ml) and dexamethasone (0.8 mg) 10 minutes before surgery. Group 3 was infiltrated with 0.4% bupivacaine (0.2 ml) and dexamethasone (0.8 mg) after surgery. Group 4 was infiltrated with normal saline (0.2 ml) and dexamethasone (0.8 mg) 10 minutes before surgery. Group 5 was infiltrated with only 0.4% bupivacaine (0.2 ml) before surgery. Rat paw withdrawal thresholds were measured using the von Frey hair test before surgery as a baseline measurement and on postoperative days 3, 6, 9, 12, 15, 18 and 21. Results: In the group injected preoperatively with dexamethasone and bupivacaine, mechanical allodynia did not develop and mechanical threshold forces were significantly different compared with other groups, especially between postoperative days 3 and 9 (P < 0.05). Conclusions: In conclusion, preoperative infiltration of both dexamethasone and bupivacaine showed a significantly better analgesic effect than did infiltration of bupivacaine or dexamethasone alone in the spared nerve injury model, especially early on after surgery.

• Journal of the Korean Society of Costume
• /
• 제30권
• /
• pp.261-274
• /
• 1996

In the present age dominate by both cer-taingty of 1% and uncertainty of 99% 'Fuzzy thinking' of Bart Kosko that is the way to solve the problems by the scientific way through a worldview of Buddhism or Taoism greatly prevails around the world over 'Lateral greatly prevails around the world over 'Lateral thinking' and the authenticity or the right and-wrong of the uncertainty which is the thinking way to find the answer of the problems of illogical way of Edward de Beno against the western vertical thinking were Concurrently fashion designers over the world also adopt the oriental elements. But there exist differences of thoughts between the orient and the occident. And they have dif-ferent thinking way of aestheticism and references of the value on the beauty. Not only beauty but the view through the mind as intuitional thought in which not only the rec-ognition of sense but also the rationalism and the naturalness play key role. The aesthetic sense in the orient contains both the truth and virtue. 2) The beauty of the mean It's from the thought of neutralization of Confucius. The mean or moderation state which in harmony with ethical virtue and aes-thetic beauty is the ideal and is the ultimate. Therefore the thought of Confucian is the creativity in which the balance and the har-mony is most important. Fashion design is also one of the representation of the mean because the spirit of the designer is harmonized for-mlessly with the object of the model of the fashion design. 2) The beauty of skillfulness It indicates the Taoism of Lao-tzu and Chuangtzu. It takes a super-artistic declar-ation that human can feel and recognize the color of colorlessness the sound of sound-lessness and the taste of tastelessness. The thought of arts affected by Taoism is 'ad-vanced age' called the beauty of skillfulness. The view of arts of lao-tzu takes the beauty of cosmos and the nature as a standard. Es-pecially the beauty of inactivity is recognized by the linkage between the beauty and the ugliness. And these things appear in fashion design as a design element such as humor or exaggeration. 3) The beauty of non-dualism It is thought of Buddhism that all evil passions of worry occur form the opposition in dualism. Finally this thought leads to that everything is consistent and truth is only one from the point of view that virtue and vice has on linkage that is 'no virtues no vices' and 'one with two, two, with one, one is not two' A big tendency like this became the root forma-tion of the thought of the oriental arts. 3. Characteristics of the oriental aesthetic sense on the present fashion design 1) The formation of the fashion design on the oriental elements In the picture-incantation which was a representation of an era when the thought of 'cosmic dual forces' dominated the basic polygons of 'a circle square triangle' means both 'one two three' and 'the negative positive mean' of cosmic elements. From this point of view the was of planner cutting in the Orient is dif-ferent from that of the Occidental which is in three-dimensional. The planner polygon type of the cut-pieces comes to have the meaning of the three-dimension when they consist of a suit that has the combination of each cut-piece. This shows the consistency with the principle of cosmos creation of Taoism that one is two two is three and three is every-thing. 2) The coloring and the symbolic represen-tation of the fashion design on the orien-tal elements The sense on the colors in the Orient from the thought of 'the cosmic dual forces and the five elements' is not the experi-enced from the knowledge but contains the consideration of philosophy Five-primary-color representing compass directions Blue(East) Red(South) Yellow(Center) White (West) and Black (North) is called ' the posi-tive' for this five-primary-color secondary-color which comes from the compound of the primary colors is called 'the negative' The thought of 'the cosmic dual forces and the five elements' is also an theory containing the natural order of the cos-mos and this shows the perceptional differ-ence that they are not conceptual but to be recognized and fell directly. A thought of Buddhism which is 'Colors are colorlessness and Clolorlessness are color's proves that. 3) The pattern and symbolic representation of the fashion design on the oriental elements The pattern as a visual style is a figure of symbolic representation which adopt the mental and physical world of human and are the compo-sition of artistic revelation of the human nature and the religous thought of incantation. Es-pecially the symbolic representation of the oriental thought of Confusion. Buddhism and Taoism There are patterns such as plants aminals the oriental four gods and geometry. From the above it's the time toward the 21'th century when the world is constructing one global area and one historical zone. And the exotic mood of the Orient represented in the fashion which doesn't make the common feeling in general does not cease to develop only to express the visual modeling but also adopts the thought religion and the art which are the root of the Orientail and contains inherent willing of modeling.

• Wind and Structures
• /
• 제11권3호
• /
• pp.221-240
• /
• 2008

The spanwise flow structure around a rigid smooth circular cylinder model in cross-flow has been investigated based on the experimental data obtained from a series of wind tunnel tests. Surface pressures were collected at five spanwise locations along the cylinder over a Reynolds number range of $1.14{\times}15^5$ to $5.85{\times}10^5$, which covered sub-critical, single-bubble and two-bubble regimes in the critical range. Separation angles were deduced from curve fitted to the surface pressure data. In addition, spanwise correlations and power spectra analyses were employed to study the spatial structure of flow. Results at different spanwise locations show that the transition into single-bubble and two-bubble regimes could occur at marginally different Reynolds numbers which expresses the presence of overlap regions in between the single-bubble regime and its former and later regimes. This indicates the existence of three-dimensional flow around the circular cylinder in cross-flow, which is also supported by the observed cell-like surface pressure patterns. Relatively strong spanwise correlation of the flow characteristics is observed before each transition within the critical regime, or formation of first and second separation-bubbles. It is also noted that these organized flow structures might lead to greater overall aerodynamic forces on a circular cylinder in cross-flow within the critical Reynolds number regime.

• Journal of Distribution Science
• /
• 제15권11호
• /
• pp.49-57
• /
• 2017

Purpose - In Korea, general super markets have a great impact on the market performance of traditional markets. We propose a modified two stage DEA model for evaluating the performance of traditional markets in Incheon, Korea by identifying the influence of external environmental factors including the presence of general super markets as non-discretionary variables in DEA. Research design, data, and methodology - After obtaining bias-corrected estimates of original DEA efficiency scores using the input and output data of 49 traditional markets, we regress them on several external environmental factors by bootstrap-truncated regression. Results - We obtain bias-corrected efficiency scores from the original DEA efficiency scores by bootstrap and among the five environmental factors, the residential population and the presence of general super markets or SSMs can be considered as the driving forces influencing bias-corrected efficiency scores, positively and negatively, respectively. Conclusions - When DEA efficiency scores tend to be overestimated, we need to use a biased-corrected efficiency score by bootstrap. It is important to note that the efficiency of traditional markets can be largely influenced by external environmental factors such as the presence of general super markets or SSMs that traditional markets can not control. Therefore, it is desirable to consider such environmental factors appropriately for a reasonable performance evaluation.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.295-303
• /
• 2013

This paper reports an investigation of pulse width modulation (PWM) techniques for two-phase brushless DC (BLDC) motors fed by a two-phase eight-switch inverter in a fan application. The three-phase BLDC motor is widely applied in industry; however, a lower-cost two-phase BLDC motor and drive circuit has been greatly in demand in recent years. In this paper, we introduce a mathematical model of the two-phase BLDC motor with sinusoidal back electromotive forces (EMFs) based on traditional three-phase BLDC motors. To simplify the drive algorithm and speed up its application, we analyze the principle of block commutation for a two-phase BLDC motor drive in the 180-electrical-degree conduction mode, and we further propose five PWM schemes to improve the commutation performance of the two-phase BLDC drive. The effectiveness of the proposed PWM methods is verified through experiments.