• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.572-581
• /
• 2006

This study is to investigate dynamic response of concrete buried pipelines with various end boundary conditions and develop a curve fitted equation to ensure practicality and convenience for the use at the actual field for the test of resistance of earthquake. Dynamic response under the various end boundary conditions is calculated with analysis on values and computing programs. However, such a method of analysis requires skillfulness in using computing programs for dynamic movement of buried pipelines with dynamic analysis formula and has lower efficiency and practicality because, in the nature of analysis program of values, it needs much time to conduct repeated calculations. Therefore, the study is intended to develop a curve fitted equation to ensure more efficient and practical analysis. This paper tests various degrees of equation with non-linear least square method and developments a curve fitted equation based on the transmission speed with the best results. In the use of curve fitted equation, degree of polynomial and determining coefficient are influenced by the speed of transmission.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1326-1333
• /
• 2006

Purpose of this research is a development for the curve fitted equations that can improve practical calculation and work application when seismic performance has been evaluated and this work has been made a study of the dynamic response under various boundary conditions of buried pipelines to compare the dynamic behavior of concrete pipe and steel pipe, FRP pipe. This research have been developed curve fitted equations that can be improving efficiency and practicality. Using a nonlinear least square method, and after testing several different exponential equations, Proposed the curve fitted equations to give the best result and constant value by the propagation velocities. With these results, dynamic response analysis and seismic performance evaluation have been achieved on concrete pipe, steel pipe and FRP pipe that have a various boundary conditions. Degree of a polynomial expression and coefficient value by propagation velocity have been calculated when using the curve fitting equations.

• 화약ㆍ발파
• /
• 제24권1호
• /
• pp.9-19
• /
• 2006

본 연구는 일단고정-일단자유 단부 경계조건을 가진 콘크리트 매설관의 동적응답을 연구하고, 내진성능 평가 시 실용적이고 실무적용성이 높은 곡선 적합식의 개발을 목적으로 한다. 매설관의 동적응답을 연구하기 위해 기존 연구에서 개발된 수치해석 프로그램을 사용하여 일단고정-일단자유 단부 경계조건에 대한 최대변형 률 발생지점을 산정한 후, 산정된 지점에 대하여 5-1000(m) 의 파장${\lambda}$과 100-2000(m/see)의 전파속도 $(V_s)$를 적용하여 파장${\lambda}$의 변화와 전파속도 $(V_s)$의 변화에 따른 단위 (휨) 변형률 곡선식을 산출하였다. 적합성이 높은 곡선 적합식을 개발하기 위해 비선형 최소자승법을 이용하여 다양한 형태의 지수방정식을 검정한 후, 가장 좋은 결과를 나타내는 곡선 적합식과 필요한 계수 값을 제시하였다.

• 한국지진공학회논문집
• /
• 제10권4호
• /
• pp.25-33
• /
• 2006

지진해일 위험재해도의 작성과 재해경감대책 수립을 위해서는 연안역의 상세한 수심 및 지형을 이용한 시뮬레이션이 요구되고 있다. 본 연구에서는 Beowulf 병렬계산을 통해 동해 전 영역에서 정밀산정이 가능한 병렬유한요소모형을 이용하여 1993년 7월 12일 동해안에 내습한 지진해일에 대한 시뮬레이션을 수행하고, 그 계산 결과와 관측치와의 비교결과를 제시한다. 또한, 해안에서의 지진 해일고의 통계적 분포에 대해 논하며, 해안에서의 지진해일고의 파고분포가 전반적으로 대수정규분포를 따르는 경향을 제시하였다.

• Journal of Animal Science and Technology
• /
• 제59권2호
• /
• pp.3.1-3.7
• /
• 2017

Background: The modelling of lactation curve provides guidelines in formulating farm managerial practices in dairy cows. The aim of the present study was to determine the suitable non-linear model which most accurately fitted to lactation curves of five lactations in 134 Gir crossbred cows reared in Research-CumDevelopment Project (RCDP) on Cattle farm, MPKV (Maharashtra). Four models viz. gamma-type function, quadratic model, mixed log function and Wilmink model were fitted to each lactation separately and then compared on the basis of goodness of fit measures viz. adjusted $R^2$, root mean square error (RMSE), Akaike's Informaion Criteria (AIC) and Bayesian Information Criteria (BIC). Results: In general, highest milk yield was observed in fourth lactation whereas it was lowest in first lactation. Among the models investigated, mixed log function and gamma-type function provided best fit of the lactation curve of first and remaining lactations, respectively. Quadratic model gave least fit to lactation curve in almost all lactations. Peak yield was observed as highest and lowest in fourth and first lactation, respectively. Further, first lactation showed highest persistency but relatively higher time to achieve peak yield than other lactations. Conclusion: Lactation curve modelling using gamma-type function may be helpful to setting the management strategies at farm level, however, modelling must be optimized regularly before implementing them to enhance productivity in Gir crossbred cows.

• 한국공작기계학회논문집
• /
• 제12권4호
• /
• pp.17-22
• /
• 2003

This paper presents a new circular curve fitting approach of articulated manipulators, based on least square. The approach aims at gaining the interpolation of circle from n data points, under the condition that the fitted circle should pass both a starting point and an ending point. First a spherical fitting should be performed, using least squares. Then the circular curve fitting can be resulted from the intersection of the fitted sphere and the plane obtained from 3 points, i. e., a starting point, an ending point and the center of a sphere. The proposed algorithms are shown to be efficient by using MATLAB-based simulation.

• Advances in Energy Research
• /
• 제1권1호
• /
• pp.35-52
• /
• 2013

A model for DMFC anode performance is developed. The model takes into account potential--independent methanol adsorption on the catalyst surface, finite rate of proton transport through the anode catalyst layer (ACL), and a potential loss due to methanol transport in the anode backing layer. An approximate analytical half--cell polarization curve is derived and equations for the anode limiting current density are obtained. The polarization curve is fitted to the curves measured by Nordlund and Lindbergh and parameters resulted from the fitting are discussed.

• 품질경영학회지
• /
• 제25권1호
• /
• pp.44-55
• /
• 1997

In order to determine procedures for a, pp.opriate model selection of technological growth curves, numerous time series that were representative of growth behavior were collected according to data characteristics. Three different growth curve models were fitted onto data sets in an attempt to determine which growth curve models achieved the best forecasts for types of growth data. The analysis of the results gives rise to an a, pp.oach for selecting a, pp.opriate growth curve models for a given set of data, prior to fitting the models, based on the characteristics of the goodness of fit test.

• 대한치과보철학회지
• /
• 제28권1호
• /
• pp.95-122
• /
• 1990

This study was done to analyze the occlusal curve as one of the factors to be considered for maintenance of occlusal stability in the orthodontic and prosthodontic treatments. Sixty gnathological casts we.e obtained from 43 subjects with normal occlusion and 17 subjects with some of temporomandibular disorders. The occlusal surfaces of gnathologic casts were duplicated by using a Color kit SK-700 and tile reference points of X, Y coordinates were digitized by using the Summagraphic digitizer and 18AT computer system. The Z coordinates of cusp height were measured by 0.01mm measurable caliper. The mathematical computer program of least square method was used to analyze the occlusal curve arranged by three dimensional coordinates of X, Y, Z. The following results were obtained : 1. The occlusal curve of buccal and lingual cusp tips was fitted to the ellipse, and the occlusal curve of anterior teeth was fitted to a part of the circle in the analysis of conic sections. 2. The radius of Spee's curve showed individual differences, but was average 98.7mm in male subjects and 93.7mm in female subjects. 3. The radius fo Spee's curve according to the half of canine width showed the least coefficient of variation. 4. The radius of Spee's curve was not significantly relative to the lateral occlusal contacts on laterotrusion and the absence or presence of temporomandibular disorders. 5. The radius of Wilson's curve showed individual difference and the size of radius was followed by the order of 1st premolar, 2nd premolar, 2nd molar and 1st molar.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권10호
• /
• pp.5891-5893
• /
• 2013

Incidence/mortality of liver cancer follow logistic curves because there is a limit reflecting the prevalence of hepatitis virus carriers in the cohort. The author fitted logistic curves to incidence/mortality data covering the nine five-year cohorts born in 1911-1955 of both sexes. Goodness-of-fit of logistic curves was sufficiently precise to be used for future predictions. Younger cohorts born in 1936 or later were predicted to show constant decline in incidence/mortality in the future. The male cohort born in 1931-35 showed an elevated incidence/mortality of liver cancer early in their lives supporting the previous claim that this particular cohort had suffered massive HCV infection due to nation-wide drug abuse in the 1950s. Declining case-fatality observed in younger cohorts suggested improved treatment of liver cancer. This study demonstrated that incidence/mortality of liver cancer follow logistic curves and fitted logistic formulae can be used for future prediction. Given the predicted decline of incidence/mortality in younger cohorts, liver cancer is likely to be lost to history in the not-so-distant future.