• Journal of Korean Society on Water Environment
• /
• v.39 no.6
• /
• pp.475-490
• /
• 2023

Chemical water quality suitability for species (Ephemera strigata, Ephemera separigata, and Ephemera orientalis-sachalinensis group) of the mayfly genus Ephemera (Order Ephemeroptera) was analyzed with probability distribution models (Exponential, Normal, Lognormal, Logistic, Weibull, Gamma, Beta, Gumbel). Data was collected from 23,957 sampling units of 6,664 sites in Korea from 2010 to 2021. E. orientalis-sachalinensis occurred at the range of BOD₅ 0.3~11.1 mg/L (the best-fit Lognormal model); T-P 0.007~0.769 mg/L (the Gumbel model); TSS 0.4~142.2 mg/L (the Lognormal model). E. strigata occurred at the range of BOD₅ 0.4~7.4 mg/L (the Gumbel model); T-P 0.007~0.254 mg/L (the Lognormal model); TSS 0.4~17.1 mg/L (the Lognormal model). E. separigata occurred at the range of BOD₅ 0.4~2.6 mg/L (the R-Weibull model); T-P 0.007~0.134 mg/L (the Lognormal model); TSS 0.7~10.0 mg/L (the Lognormal model). Habitat suitability range of E. orientalis-sachalinensis was estimated to be 0.4~1.9 mg/L (BOD₅), 0.024~0.086 mg/L (T-P), 2.5~22.4 mg/L (TSS); that of E. strigata was 0.4~0.7 mg/L (BOD₅), 0.007~0.018 mg/L (T-P), 0.0~1.7 mg/L (TSS); that of E. separigata was 0.0~0.4 mg/L (BOD₅), 0.000~0.015 mg/L (T-P), 0.5~3.1 mg/L (TSS). In a relative comparision, E. orientalis-sachalinensis was estimated to be eurysaprobic, and narrowly adapted in high levels of T-P and TSS, E. strigata was estimated to be oligosaprobic and adapted in low levels of T-P and TSS, and E. separigata was estimated to be stenooligosaprobic and widely adapted in low level of T-P and TSS.

• Korean Journal of Human Ecology
• /
• v.12 no.4
• /
• pp.559-570
• /
• 2003

The focus of this research was concerned with studying lower body type for Korean adult males. To understand the features of men's lower body required to organize an optimal sizing system for men's tight-fit slacks, information from the measuring values based on research on the physical standard of the nation(l997) were summarized; in addition, a factor analysis and a cluster analysis among multivariate analyses were performed. In terms of the need for appropriate fit in motorcycle wear, basic lower body parts applying to each item had to be taken into consideration to enhance sizing suitability. In the case of the length of the lower limbs, the inclusion of protectors plays an important role in affecting sizing. The factors related to the lower body were defined as follows: Factor 1 was the vertical dimension of the lower body, Factor 2 was the horizontal dimension of waist and hip, Factor 3 was the horizontal dimension of the lower limbs, Factor 4 was the length of hips, and Factor 5 was the ankle height. The lower body part was also divided into 3 clusters. Cluster 1 referred to the smallest stature and skeleton structure among the 3 body types. Cluster 2 represented the biggest stature, with a thin lower limbs body type. Cluster 3 represented a medium stature but with a large skeleton structure of lower limbs, a muscular type. In conclusion, Cluster 2 appeared most in the 20s age groups, but Cluster 3 appeared most in each of the 30s, 40's, and 50's age groups.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.5
• /
• pp.675-689
• /
• 2014

This study developed an ideal jeggings pattern with an improved body fit for 20-24 year old females. The results of the study are as follows. First, samples for wearing test were made using jegging patterns from three manufacturers; subsequently, one pattern with a relatively outstanding body fit was selected from the first test. The selected pattern suggested a tight knee, belly, and crotch, high front waist line, and low back waist line. The side lines were also lean to the front; consequently, the front hip width was extended for 0.5cm for more space around the belly and the extended front knee part for 0.2cm to increase moving suitability to fix the leaning side lines. A 1cm front waist line was extended for 0.5cm to fix it lower; in addition, the back waist line 3.0cm was extended for 0.5cm to heighten it. The crotch width was also extended for 0.5cm to add more space. The second wearing test for the fixed forms were evaluated for their outstanding features in appearance as well as moving functions that were proposed as final jeggings forms. The results of the study suggested a jeggings pattern with a better body fit using manufacturer patterns that can be used as basic data for pant patterns with better fitting using various stretch fabrics.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.449-456
• /
• 2018

This study conducted a survey of members at sports climbing centers on the purchasing and wearing conditions of sports climbing wear and design preferences. 140 participants were in their 20's and 30's, and many of them engaged in sports climbing activities over 20 times a month. They put emphasis on the motion adaptability, durability, price and functional material when purchasing a climbing wear. However, only 23% of them used sports climbing wear. The reasons for wearing sports climbing wears were suitability for physical activity, comfort, and design. On the other hand, the reasons for not purchasing them were expensive prices and lack of designs. They experienced inconveniences at sleeves and waist in shirts. In case of pants, participants experienced inconveniences with the knee and thigh when they climbing. Concerning the damage of shirts, the majority experienced the elbow part was worn out, and the knee part was either worn out or torn at pants. Design preference results showed participants preferred loose-fit short-sleeved shirts that could cover half of the hip. In case of pants, they preferred basic-fit long trousers and basic hems with no functional characteristic. 3 sports climbing instructors answered that climbing wears should put emphasis on deodorization and antimicrobial effects as well as durability and suitability for physical activity. They also pointed out limitations in price and design and presented opinions about creating various sizes for different body parts by taking into account the growth of muscles.

• Journal of the Korean Home Economics Association
• /
• v.44 no.7 s.221
• /
• pp.63-72
• /
• 2006

The purpose of this study was to survey the wearing practices and problems in the working uniform for volunteer fire brigade members and then to develop its design with a improved movement adaptability, physical suitability, ease for equipment accommodation, functionality, convenience and fit. Based on the questionnaire, we have made a testing uniform for volunteer fire brigade members first. Through a subjective analysis for functionality and apparence, we suggested a final design. The final design includes the following elements: 1. It was a two-piece style composed of a jumper and trousers with the upper garments pulled out. Raglan sleeves were used to increase arm's movement scope. Pleats and velcro tapes were attached along the base hem of sleeves to prevent heat transmission. 2. Various types of pockets were attached to secure enough space for keeping things. 3. In trousers, spare space was given at the buttock area with rubber string inserted only at selected part of side lines, and knee pads were attached to prevent wearing out.

• Fashion & Textile Research Journal
• /
• v.18 no.3
• /
• pp.338-350
• /
• 2016

The purpose of this study is to analyze joint angle for a range of swing motion derived through 3D motion analysis in order to design the ergonomic golf wear, use it for evaluation method of apparel fit to improve exercise functionality and provide the basic materials necessary for designing clothes. In order to do this, the subjects for this study were 3 men of age 20s. The data for a range of motion of golf swing were collected by using equipment for 3D motion analysis and then were used for analysis of joint angles and evaluation method of apparel fit. Range of motion was derived through 3D motion analysis of golf swing motion and joint angles for items of joint motion item and of X, Y, and Z-axis were calculated, respectively. In order to set the evaluation questions for evaluation of apparel fit, to find a range of motion at the maximal value and the minimal value of swing motion. As a result, during the swinging motion, neck extension, right shoulder extension, right/left elbow extension, right/left elbow supination did not appear. Items of joint motion showing the maximum at range of each swing motion were applied into 55 questions and consisted. The results of this study were meaningful as a basic study to apply 3D motion analysis to the fashion industry. It's expected to be used to design functional clothing.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.2
• /
• pp.88-96
• /
• 2013

The objective of this research was to evaluate the suitability of sigmoidal and firstorder kinetic equations for simulating the methane production from solid wastes. The sigmoidal kinetic equations used were modified Gompertz and Logistic equations. Statistical criteria used to evaluate equation performance were analysis of goodness-of-fit (Residual sum of squares, Root mean squared error and Akaike's Information Criterion). Akaike's Information Criterion (AIC) was employed to compare goodness-of-fit of equations with same and different numbers of parameters. RSS and RMSE were decreased for first-order kinetic equation with lag-phase time, compared to the first-order kinetic equation without lag-phase time. However, first-order kinetic equations had relatively higher AIC than the sigmoidal kinetic equations. It seemed that the sigmoidal kinetic equations had better goodness-of-fit than the first-order kinetic equations in order to simulate the methane production.

• Journal of the Korean Home Economics Association
• /
• v.43 no.5 s.207
• /
• pp.235-248
• /
• 2005

The objective of the study was to design a Battle Dress Uniform(BDU with improved motional flexibility, body fit, and protectiveness to cope with the special operational environment of the subjects. For this purpose, the researcher conducted a questionnaire survey on 92 male members of Special Weapon Attack Team(SWAT units in a former study, and based on the results of the survey, made the two-piece and one- piece BDU samples to overcome the identified problems and inconveniences. The sample uniforms were designed ergonomically from five aspects. Subsequentlv, the new BDU was compared with the current operational uniform in terms of outward appearance(design and fit), motional flexibility, and suitability for field activities. The samples were evaluated by 5 SWAT members as subjects and 8 graduate school students majoring in clothing and textiles as experts. According to the results, the two-piece and one-piece samples gained higher scores than the existing operational uniform in terms of outward appearance(design and fitness) and motional flexibility, and the one-piece sample was preferred with regard to fit when worn by the subjects with their full kit for field operations. That is, the one-piece sample appeared to be more suited to the special work environment of SWAT and to be more functional in terms of ease of putting on and taking off, motional flexibility, body fit and protectiveness than the current operational uniform(two-piece type).

• Journal of Family Resource Management and Policy Review
• /
• v.17 no.1
• /
• pp.179-198
• /
• 2013

The purpose of this study was to analyze the impact of parental resources and parenting stress on parenting efficacy in low-income families Furthermore, in order to verify whether parental resources function as a resilience factor, a structural model was established to assess the suitability and influence of the variables. A total of 603 parents of children and adolescents between the ages of 9-18 were selected from the data from Children and Adolescents Comprehensive Status Research (2009) by the Ministry for Health, Welfare and Family Affairs. For the analyses, SPSS WIN 18.0 and AMOS 18.0 were utilized. The major results were as follows: First, the suitability of the model was confirmed with variables presenting a satisfying fit. Second, parental resources had a negative effect on parenting stress and a positive effect on parenting efficacy. Third, parenting stress had a negative effect on parenting efficacy. Finally, a test of the structural equation model supports the hypothesis that parental resources have a significant direct effect as well as an indirect effect through parenting stress on parenting efficacy. The implications for further studies and practice were discussed.

• Journal of Korean Academy of Nursing
• /
• v.48 no.5
• /
• pp.521-533
• /
• 2018

Purpose: The aims of this study are to provide a theoretical framework for improving the self-care of adults with severe hypertension and to examine the practical suitability of a middle-range theory of self-care for chronic illness by validating the structural model. Methods: Data were collected at a university hospital in D metropolitan city from July 1 to August 14, 2015. A total of 224 Korean adult patients with severe hypertension were recruited. Data were analyzed using SPSS 22.0 and AMOS 22.0. Results: The results show that the fit index of the hypothetical model meets the recommended level; 7 out of 8 hypothetical model paths were statistically significant. Motivation, self-efficacy, support from others, and accessibility to care showed statistical significance and explained 67.3% of the self-care process. The self-care process explained 45.3%, 63.6%, and 26.5% of quality of life, health, and illness stability, respectively. Conclusion: This model can be used as a theoretical framework for improving self-care among adult Korean patients with severe hypertension. Moreover, the practical suitability and validity of the middle-range theory of self-care for chronic illness is secured.