• Title/Summary/Keyword: Fishing operation process

Search Result 33, Processing Time 0.027 seconds

A study of performance improvement of a thermoelectric generation system for the coastal fishing boats (연안어선용 열전발전 장치의 성능개선을 위한 연구)

  • LEE, Donggil;KIM, Hyunyoung;BAE, Sungyoun;KIM, Jiyeon;DO, Yonghyun;YANG, Yongsu
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.54 no.3
    • /
    • pp.246-254
    • /
    • 2018
  • In this study, we developed a thermoelectric generation system for coastal fishing boats that allows for a high-density arrangement of thermoelectric modules, verified the improvement in performance by conducting comparative analysis between field test results and results from previous studies. The developed thermoelectric generation system was installed in a 3-ton gill-netter to analyze the engine revolutions per minute and energy production per day for each fishing process over a period of 20 days. From the experimental results, the maximum electric energy generated was 207.1 Wh, the minimum was 53.93 Wh and the average electric energy was 129.98 Wh. In accordance with the increasing of the engine r.p.m., the maximum electric production was 183 W at 1,500 r.p.m. It was approximately 80.5% of designed capacity, 227.2 W. Considering the result in the earlier research was 50.7% of designed capacity, 115.8 W. It was improved by 30% compared to the earlier one. The fishing operation was classified as departure, fishing and arrival. From the result on production analysis of electric energy, the composition of energy was 63% in fishing, 19.5% in departure and 17.5% in arrival. The electric energy production per unit hour was 42.8% in arrival, 32.9% in departure and 24.3% in fishing.

Analysis of occupational accidents for fisher's on gillnet fishing vessel using the written verdict (재결서를 이용한 자망어선 어선원의 어로작업 중 안전사고 분석)

  • Yoo-Won, LEE;Su-Hyung, KIM;Kyung-Jin, RYU
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.58 no.4
    • /
    • pp.367-373
    • /
    • 2022
  • We analyzed work safety risk factors, which are likely to occur during fishing in gillnet fishing vessels using the written verdict of the Korea Maritime Safety Tribunal from 2016 to 2020, and considered work safety management. Of the total of 37 fatal accidents, three cases in the East Sea, six cases in the South Sea, and 28 cases in the West Sea were very frequent. The accident rate per vessel by sea area (%) was 0.08% in East Sea, 0.12% in South Sea, and 0.40% in the West Sea. Based on the East Sea, the number of fatal accidents was 1.6 times higher in the South Sea and 5.4 times higher in the West Sea. Six cases (16.2%) occurred during departure and preparation for fishing in the fishing process, and all other 31 cases (83.8%) occurred during fishing operation. In the order of accident types, 21 cases (56.8%) of being struck by object, eight cases (21.6%) of contact with machinery and six cases (16.2%) of falls from height were found to be fatal accidents in gillnet fishery. Human factors, such as fishers' carelessness and negligent safety management by captain accounted for 27 cases (73.0%) of the main cause, and 35 cases (94.6%) of the secondary cause. In addition to human factors such as fisher's carelessness and negligent safety management by captain, mechanical factors, environmental factors and management factors must be improved together to reduce human casualties. These results are expected to be utilized as basic data for reducing safety accidents during the work of fishers.

Application and verification analysis of the thermoelectric generation system for a coastal fishing vessel (열전발전 장치의 연안어선 활용에 관한 연구)

  • LEE, Donggil;YANG, Yongsu;KIM, Pyungkwan;KIM, Seonghun;KIM, Hyunyoung
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.53 no.2
    • /
    • pp.196-203
    • /
    • 2017
  • The renewable energy sources can be thought of one of the major measures to reduce greenhouse gas emissions in the industries. However, the utilization technology for those sources is approaching in the different matters. One of them, thermoelectric generation might be applicable to fishing industry. A various of internal combustion engines are used in a wide range of fisheries. After the ignition process, the heat passed out from the exhaust outlet. Recycling the heat could be not only an energy source but also reduction of green gas emission. Therefore, this study was designed to verify the feasibility of generation from wasted exhaust gas and analyze the performance. The designed experiment devices were connected with a data logger and an electric loader to quantify the currency and voltage. The devices were installed in a coastal fishing vessel for a gillnet fishery. During the whole fishing trips, the amount of generation was measured by engine rpm and the fishing operation procedures including vessel operations. At the maximum 1,500 rpm in the practical range, the generation amount was 113.6 W. The amount difference in relation to connection method was within 5 W: serial connection was 111.4 W and parallel connection was 115.8 W.

Design of Web application for Deep-sea fishing Sailing Information based by RIA (원양어선 항해정보를 위한 RIA기반의 웹 어플리케이션 설계 및 구현)

  • Jung, Hoe-Jun;Park, Dea-Woo
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.15 no.10
    • /
    • pp.2272-2278
    • /
    • 2011
  • The company which have deep-sea fishing vessel have to improve their voyage dashboard that was operating by manually to grasp sailing information of fishing vessel. This thesis design sailing information that is ship location on the globe, a catch of fish, and line of longitude and latitude to display on the map more visually by using on-line PC or DID (Digital Information Display). Thesis considered about designing web application which is available to visualize sailing information of 37 deep-sea fishing vessels in operation by using Flash-based RIA technology. This system was improving operator's and administrator's satisfaction of using information because, It make possible not only to grasp status of many vessels in one display but also to monitoring situation and deciding process.

Risk evaluation of fisher's safety on stow net fishing vessel (안강망어선에서 조업하는 선원의 위험도 평가)

  • HYUN, Yun-Ki;KIM, Hyung-seok;LEE, Yoo-Won
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.56 no.2
    • /
    • pp.138-146
    • /
    • 2020
  • Stow net fishery is one of the fishery with high fishing work accidents in southwestern sea of Korea. We conducted to serve as basic data for improving the healthy and safe working environment of fisher using risk assessment process (ISO45001) with fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) from 2016 to 2018. The average occurrence rate of victim in this fishery was 9.04%, 16.7 times more than such rate in all industries. In addition, the average fatality rate was found to have a very serious level management to 31.06‱, 27.7 times more than such rate in all industries. The safety hazards of stow net fishery was more likely to occur by other general industrial groups, with more severe consequences after the accident. According to 4M analysis, 58.6% of all accidents were caused by human factors, 24.0% by environmental factors, 16.0% by mechanical factors, and 1.5% by managerial factors, respectively. The occurrence frequency by accident type was the highest in 187 cases (32.2%) for struck by object, 158 cases (27.2%) for slipping, and 94 cases (16.2%) for being in contact with machinery. Severity is the highest for others such as diseases etc., in the order of being struck by object, being in contact with machinery, falling from above slipping, collapsing, bumping, and burning. Being struck by object, being in contact with machinery, and slipping are high-risk groups, falling from above others, bumping, and burning are medium-risk groups based on the risk assessment using the occurrence frequency and severity of accident. The obtained results are expected to contribute to the safe operation environment subsidy for fishing crews on the stow net fishing vessel.

A Political-Economic Study on Cooperative Squid Fishing East to the $E128^{\circ}$ (동경 128도 이동 오징어 공조조업에 관한 정치경제학적 연구)

  • Park Seong-Kwae
    • The Journal of Fisheries Business Administration
    • /
    • v.35 no.2
    • /
    • pp.91-115
    • /
    • 2004
  • The main purpose of this study is to analyze the cooperative squid fisheries problems surrounding the $E128^{\circ}$, established by the 1965 Korea - Japan Fisheries Agreement which banned Korean large trawlers' fishing east to the $E128^{\circ}$ In fact, the moratorium was put on by Japans request. However, such issue did not occur until the filefish stock in the southern Korean sea, which was a major target fish species of the large trawl fisheries, The filefish stock collapsed completely around 1991 and at the same time most of bottom fish stocks in the East China Sea began to show a symptom of over - exploitation. Thus, the off - shore large trawlers learned to have a little opportunity of finding out alternative fish stocks as well as fishing grounds. Fortunately, at that time squid resource stock and consumption were on the increasing trend. The large trawl fisheries were able to economically exploit squid stock east to the $E128^{\circ}$ through cooperative fishing with squid angling light boats in the East and East - South Sea, even though such cooperative fishing activities violate the existing fishery laws apparently. Some important reasons that the large trawlers have continued the cooperative fishing seem to be because (ⅰ) squid resource stock has been on the increasing state over time, (ⅱ) the trawl fisheries have made a significant contribution to meeting domestic and export demands and stabilizing squid prices, and (ⅲ) they have kept domestic squid market from foreign competition. However, the new Korea - Japan fisheries agreement in 1998 provided a momentum of questioning the effectiveness of the $E128^{\circ}$ by the squid - related fisheries other than the squid angling. Serious conflicts between squid - related fisheries began to emerge and to be much intensified. Squid angling industries in the East opposed to large trawlers's efforts to formalize such illegal cooperative squid fishing activities. Their main argument was that such formalizing would definitely make the East coast squid prices lower and in turn their business performance would be worse off. The results of quantitative analysis suggest that the trawlers' massive landing may have a significant influence on lowering the east coast squid prices. Now, an important issue that the squid - related fisheries and the government are facing is to solve such complex squid fishing problems through a multi - participatory negotiation process, including price stabilization, total allowable catch level and its operation schemes, $E128^{\circ}$ rearrangement, and so on.

  • PDF

A Study on Flooding·Sinking Simulation for Cause Analysis of No. 501 Oryong Sinking Accident

  • Lee, Jae-Seok;Oh, Jai-Ho;Lee, Sang-Gab
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2018.11a
    • /
    • pp.241-247
    • /
    • 2018
  • Deep-sea fishing vessel No. 501 Oryong was fully flooded through its openings and sunk to the bottom of the sea due to the very rough sea weather on the way of evasion after a fishing operation in the Bearing Sea. As a result, many crew members died and/or were missing. In this study, a full-scale ship flooding and sinking simulation was conducted, and the sinking process was analyzed for the precise and scientific investigation of the sinking accident using a highly advanced Modeling & Simulation (M&S) system of the Fluid-Structure Interaction (FSI) analysis technique. To objectively secure the weather and sea states during the sinking accident in the Bering Sea, time-based wind and wave simulation at the region of the sinking accident was conducted and analyzed, and the weather and sea states were realized by simulating the irregular strong wave and wind spectrums. Simulation scenarios were developed and full-scale ship and fluid (air & seawater) modeling was performed for the flooding sinking simulation, by investigating the hull form, structural arrangement & weight distribution, and exterior inflow openings and interior flooding paths through its drawings, and by estimating the main tank capacities and their loading status. It was confirmed that the flooding and sinking accident was slightly different from a general capsize and sinking accident according to the simple loss of stability.

  • PDF

Longitudinal Strength Safety and Refloat Calculation of a Grounded Ship (좌초 선박의 종강도 안전성 및 부양계산 기술 개발)

  • 강창구;김진환
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.4 no.2
    • /
    • pp.35-42
    • /
    • 1998
  • Marine casuality causes not only loss of lives and ships, but also severs damages to marine environment and related economic activities such as fishing industry, sea farming, and tourist industry. Basically, the great effort should be made to prevent the occurrence of maritime accidents by any means. However, once accident has occurred, the salvage works should be done rapidly and properly based on theoretical and technical informations, which could minimize the risk during salvage operation and the overall damage from the maritime accidents. Generally, to calculate accurate hydrostatics of a stranded ship, a large amount of input data is needed. But, an availability and a reliability of input data cannot be guaranteed in most situations, and the adequate time required for preparing all input data is not allowed to perform the timely operations of salvage. In this paper, the development process of simple computer program for salvage operation using limited input data is introduced and its application example is presented. This program was developed to provide technical support for planning salvage operations in the grounding accident.

  • PDF

A Study on Automatic Separating System of the Sea Eel Pots from Main Line (통발 자동 분리기에 관한 연구)

  • Jung, Yong-Gil;Park, Young-Gil;Yoo, Keum-Bum
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.34 no.2
    • /
    • pp.139-143
    • /
    • 1998
  • In the fishing process on the sea eel pots, the most dangerous and difficult labor is manually separating process of several thousand pots from main line with high speed hauling operation. In this study, the automatic separating system of the pot from main line is developed. This system is composed with the clip connected to the pot by branch line, the keeper attached to the main line by pressing and the separator separating the clip and the keeper. In the experiment, static and dynamic characteristics of the system are investigated. From the considerations on the experimental results, it is ascertained that the automatic separating system of the pot from main line proposed in this study has good operating performance.

  • PDF

Development of fishing gear and fishery operation system for the croaker drift gill net 2. Performance tests of labor saving type model net hauler (조기유자망 어구의 개량 및 생력화 조업시스템 개발 2. 생력형 모형 양망기의 성능 시험)

  • Kim, Suk-Jong;Koo, Myung-Sung
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.41 no.3
    • /
    • pp.199-206
    • /
    • 2005
  • As the basic study about improvement of yellow croaker drift gill net fishing implement and development of the fishing system, this study drew problem after synthetically analyzing hauling system of yellow croaker drift gill net used in the coast of Chuja Island and tested several characters and analyzed in hauling process with 5 step net hauler model for improving the problem. The analysis results are as follows. When the angle between axises of drum centers was small, it showed the tendency that hauling time was fast. Hauling time was faster when drum was 5 step rather than 3 step. When drum was 5 step, slippery phenomenon was small and hauling was stable. Tension was larger when drum was 5 step rather than 3 step. When drum was 5 step, the range of change of the maximum and minimum value was small and hauling was stable. When drum was 3 step, there was following formula between hauling time ($Ht_3$) and angle between axises of drum centers ($A_g$) $Ht_3$ : ($7.15Hs^{-0.81}$) $A_g^{-0.81}$, when drum was 5 step there was following formula.$Ht_5$ : ($6.45Hs^{-0.75}$) $A_g0.10$, here, Hs is hauling speed. When drum was 3 step and hauling speed was 28cm/sec, tension was $T=0.08A_8^3-1.60A_g^3-0.49A_g+369.56(r=0.99)$, when drum was 5 step, tension was, $T=-0.01A_g^3+1.96A_g^2-34.05A_g+414.58$ (r-0.99), here, T was tension(g).