• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.911-916
• /
• 2014

The leisure boat industry has the potential to become a high-value-added industry in the future. Recently, a study on Korean high-speed leisure boats for fishing was conducted. This study suggests a product configuration model-based shipbuilding cost estimation method for determining the type of leisure boat suitable for mass production, as part of a research for productivity improvement. The suggested estimation method based on the analysis of the leisure boat process and generic YWBS can calculate quantitative and concrete data. By using this method, the cost of building the catamaran-type design ship can be reduced by 17 times, compared to that of the monohull-type mother ship. This implies that the final design of the Korean high-speed leisure boat for fishing will have a competitive price at the actual production stage.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.5 s.54
• /
• pp.88-94
• /
• 2003

A series of tests of 5 model ships, selected from a data survey of 10 Gross Tonnage actual fishing boats, were performed in two circulating water channels (Chosun University in Korea and WJFEL in Japan), in order to develop the basic hull form of a 25 knots-class fishing boat. Resistance tests, trim and sinkage measurements and wave pattern observations etc., were included in each I1wdel test, and the model test results were compared and analyzed. The result was as follows: P-4 hull form ship changed into Deep V type bow is the best hull form with good performance, especially with regard to ship's resistance efficiency.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.381-382
• /
• 2007

Recently fishing industry is interested in efficient and automated fishing implementations to reach the level of the international leading technology. One of the important device used in fishing boat is an automated electric compass that harnesses the GPS and terrestrial magnetic sensor. The electric compass is desired to be minimized in size while keeping a high effectiveness in the characteristic of a magnetic compass. This device also can be used as a heading angle sensor to construct auto-navigation system in a small size of ships. However, there exists measurement errors induced from the slope of terrestrial magnetic sensor caused by the motion of boat. In this paper, a method has been proposed removing the measurement error arising from the slope of terrestrial magnetic sensor when the ship is in motion. We have designed a sensor with two DOF(degree of freedom) and a weight to maintain the horizontality of the sensor. Through this research, the hardware has been designed and also a test has been performed. The test shows a promissory result.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.863-870
• /
• 2023

Ship capsize accidents are common in coastal waters, particularly involving small fishing boats. To prevent there overturing accidents in small fishing boats, their stabilities must be assessed at the initial design step. However, the available information during the initial design step is limited, posing challenges in performing a reliable stability evaluation. Therefore, this study presents a plan to estimate the transverse metacenter (GM) of small fishing boats using parameters such as KM, KG, and TRIM that can be determined at the initial design step. Stability was evaluated by comparing GM with the minimum transverse metacenter (GMmin) specified in the standard safety evaluation criteria for fishing boats. To calculate the required trim value for hydrostatic characteristics using K-SHIP, a stability assessment program provided by the Korea Maritime Safety and Transportation Corporation, the initial trim state is estimated based on the ship lines using the commercial CFD program STAR-CCM+. GM is then calculated by assessing the hydrostatic characteristics in relation to the boat lines using K-SHIP. Furthermore, the stability of the fully loaded state is compared by subtrcating GM from GMmin. One constructed ship is designated as the standard ship, and the stability assessment method proposed in this study is applied to evaluate stability and validate its effectiveness. Consequently, the representative line of a 4.99-ton fishing boat and nine modular lines models derived from it were evaluated, ultimately identifying a relatively superior stability.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.380-395
• /
• 2019

Seakeeping, especially for the roll motions, is of critical importance to the safe operation of fishing boats in Indonesia. In this study, a traditional East Java Fishing Boat (EJFB) has been analysed in terms of its seakeeping performance. Furthermore, a bilge keel was designed to reduce the roll motions of the EJFB using multiple stages approach. After installing the designed bilge keels, it was shown that up to 11.78% and 4.87% reduction in the roll response of irregular seaways and the total resistance under the design speed, respectively. It was concluded that the roll-stabilized-EJFB will enhance the well-being of the fisherman and contribute to the boats' safe operation, especially in extreme weather conditions. Moreover, the total resistance reduction of the EJFB due to the installation of the designed bilge keels also resulted in increased operational efficiency and reduced fuel costs and fuel emissions for local stakeholders.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.181-189
• /
• 2001

This paper describes the positioning accuracy of GPS moduls (KGP9800C, KiRyung) which need to record the operating position of fishing boat as realtime processing in order to develope auto recording system of fishing boat's operating information, and then it's positioning accuracy for DGPS receiver (MGP-100D, Shin-A) and DGPS beacon (GP-36, Furuno) were analyzed. Futhermore, it was examined the positioning error of the GPS module with processing algorithm to minimize the effect of the signal fluctuations. The results indicate that the positioning error is able to decrease 5m as 2drms, and such improvement of positioning performance for GPS module (KGP9800C) can be provide the basic design data in the development of the auto recording system of fishing boat's operating information.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.89-94
• /
• 1997

In the design of high speed fishing vessel, its hull form has to be decided from a view point of resistance and propulsion performance without negelction of seakeeping characteristics. In spite of many efforts, the performance improvement by hull form itself has its limitations, specially for high speed craft. In this paper, the development of performance of resistance and seakeeping improving appendage for high speed planing hull on behalft of the hull form of fishing vessel has been introduced. The developed appendage verified its effectiveness in the full scale test.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.2
• /
• pp.79-87
• /
• 2011

A fishing lamp is fishing gear to gather fish in the night. But the cost of oil which is used to a light fishing lamp, goes significantly up to almost one hundred million won for 50 tonnage vessels and forty million won in case of vessels less than 10 tonnages. This cost has almost taken 30.40% of total fishing costs. As oil price increases, the business condition of the fishery gets worse and worse. Therefore, it is very urgent to develop an economical fishing lamp, to solve the problem of fishery's business difficulty. This research aims at developing a fishing lamp for squid jigging fishery and hairtail angling fishery using the LED, which has excellent efficiency and durability. One fishing lamp has about 160Watt capacity and five fishing lamps are installed one aluminium panel in which sea water flows to emit generated heat from LED to outside. Developed fishing lamp lights to an effective direction of jigging and angling operation. This fishing lamp can be controlled to light the direction of fish shoal because the aluminium panel can be controlled to up and down direction. The wave length of fishing lamp has white and blue color. White color light is to gather fish shoal of horizontal direction and blue color light is to gather fish shoal of vertical direction. After development of this fishing lamp, 60.110 units are established on the boat, and operated fishing. Consequently, in the case of squid jigging, spent energy was reduced to 39%, in the case of hairtail angling, 68% of spent energy was reduced. And the catch was more than another boat.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.76-83
• /
• 2018

In order to prevent overusing the fishing gear and to reduce discarded fishing gear, there is a need for a technique that can efficiently transmit the information including the type and location of the fishing gear and the user's real name to the fishing boat and the control center using IoT-based communication. In order to do this, it is necessary to be able to confirm the position information of a plurality of buoys that can be identified by the base stations on the land. In this paper, in order to service the maritime IoT communication system, we calculate the link budget between the land base station and the targets on the sea to derive the service coverage. To design a marine IoT radio network for building a fishing gear monitoring system, we calculate link budget for wireless service optimization at sea for NB-IoT using 1.8 GHz frequency band and LoRa service using 900 MHz frequency band. In addition, the link budget between the land base station and buoy, the link budget between the land base station and fishing boat are calculated and the results are analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.5
• /
• pp.779-786
• /
• 2018

Ministry of oceans and Fisheries declared action plan for the electric fishing gear using real name in order to prevent overusing the fishing gear and to reduce discarded fishing gear. It is needed for a technique that can efficiently transmit the information including the type and location of the fishing gear and the user's real name to the fishing boat and the control center using IoT-based communication. In this paper, we propose the buoy-launched terminal equipment and ship-launched gateway equipment based on LoRa technology for effectively executing the electric fishing gear using real name. We design and fabricate to communicate 1(gateway):200(buoy) each other under 900 MHz ISM band by using SEMTECH SX1276 chip. Also, we experiment the test on the sea and analyze the test results to prove the implementation possibility of the proposed equipments for the electric fishing gear using real name.