• Imaging Science in Dentistry
• /
• 제45권4호
• /
• pp.221-226
• /
• 2015

Purpose: This study evaluated the prevalence of distolingual roots in mandibular molars among Koreans, the root canal system associated with distolingual roots, and the concurrent appearance of a distolingual root in the mandibular first molar and a C-shaped canal in the mandibular second molar. Materials and Methods: Cone-beam computed tomographic images of 264 patients were screened and examined. Axial sections of 1056 mandibular molars were evaluated to determine the number of roots. The interorifice distances from the distolingual canal to the distobuccal canal were also estimated. Using an image analysis program, the root canal curvature was calculated. Pearson's chi-square test, the paired t-test, one-way analysis of variance, and post-hoc analysis were performed. Results: Distolingual roots were observed in 26.1% of the subjects. In cases where a distolingual root was observed in the mandibular molar, a significant difference was observed in the root canal curvature between the buccolingual and mesiodistal orientations. The maximum root canal curvature was most commonly observed in the mesiodistal orientation in the coronal portion, but in the apical portion, maximum root canal curvature was most often observed in the buccolingual orientation. Conclusion: The canal curvature of distolingual roots was found to be very complex, with a different direction in each portion. No correlation was found between the presence of a distolingual root in the mandibular first molar and the presence of a C-shaped canal in the mandibular second molar.

• Journal of Periodontal and Implant Science
• /
• 제50권1호
• /
• pp.38-47
• /
• 2020

Purpose: The aim of this study was to investigate the available alveolar bone height between the maxillary molars and the sinus floor according to their anatomical relationship using cone-beam computed tomographic (CBCT) images. Methods: A total of 752 maxillary first (M1) and second molars (M2) on CBCT scans of 188 patients were selected. First, each maxillary molar was categorized as type 1, 2, 3, or 4 according to the relationship of the molar root with the maxillary sinus floor. The frequency distribution of each type was analyzed. Second, the shortest vertical distance (VD) of each molar was measured from the furcation midpoints of the roots to the lowest point of the sinus floor by 2 observers. Intraclass correlation coefficients and the t-test were calculated for the VD measurements. Results: For M1, type 3 was the most frequent, followed by type 2. For M2, type 3 was the most common, followed by type 1. The VD measurements of type 1 were 9.51±3.68 mm and 8.07±2.73 mm for M1 and M2, and those of type 3 were 3.70±1.52 mm and 4.03±1.53 mm for M1 and M2, respectively. The VD measurements of M2 were significantly higher in female patients than in male patients. Conclusions: Type 3 was the most frequent anatomical relationship in the maxillary molars, and showed the lowest alveolar bone height. This information will help clinicians to prevent complications related to the maxillary sinus during maxillary molar treatment and to predict the available bone height for immediate implant planning.

• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.309-316
• /
• 1996

Squamous cell carcinoma is the most common malignant tumor of the gingiva. Oral cancer accounts for 5 percent of all malignant tumors in the body, and 6 percent of these occur in the gingiva. We present one case of squamous cell carcinoma of the gingiva in 23-year-old female. She complained of gingival swelling and pain during mastication between left maxillary first molar and second molar. Since she had received scaling 2 years ago, food impaction occurred frequently in this site and an ulcerative lesion recurred several times. When she was referred from local clinic, she had a large, irregularly ulcerated lesion of palatal gingiva between left maxillary first molar and second molar, accompanying induration in center and slight elevation around ulcerative margin. The etiology could not be defined but we could diagnose by careful history taking and excisional biopsy of the recurrent ulcerative lesion. In addition, computed tomography and nuclear medicine imaging were undertaken. As a result, we finally diagnosed as moderately differentiated squamous cell carcinoma without metastases. It is concluded that if ulcerations do not respond to therapy in the usual manner, it should be biopsed and histologically evaluated for the definitive diagnosis and treatment.

• 대한치과교정학회지
• /
• 제18권1호
• /
• pp.209-216
• /
• 1988

The purpose of this study was to verify the class I molar relationship in skeletal class II and class II molar relationship in skeletal clan I malocclusion with unilateral class II, division 1 malocclusion. The sample consisted of lateral cephalometric radiographs and upper and lower dental casts of 30 unilateral class II, division 1 malocclusion. The results of this study were as follows: 1. Skeletal class I malocclusion was $43\%$, and skeletal class II malocclusion was $57\%$ in 30 cases of unilateral class II, division 1 malocclusion. 2. In the skeletal class II with unilateral class II, division 1 malocclusion, mandibular first molar on the class I side showed more mesial migration than the opposite side. 3. In the skeletal class I with unilateral class II, division 1 malocclusion, maxillary first molar on the class II side showed more mesial migration than the opposite side. 4. Midline deviation of upper or lower dental arch was $90\%$ in 30 cases of unilateral class II, division 1 malocclusion.

• Restorative Dentistry and Endodontics
• /
• 제7권1호
• /
• pp.41-45
• /
• 1981

A 19-year-old Korean woman presented with left mandibular dental pain and swelling. Periapical radiolucencies were associated with the mandibular left first molar, second molar and the mandibular right second molar. The mandibular right second molar root developed incompletely and has the open apex. Clinical examination revealed worn accessory occlusal cusps of premolars. A diagnosis of dens evaginatus with associated periapical lesion secondary to pulpal necrosis was made. The root canal of the lower right second premolar was sealed with Calcium hydroxide paste for apexification. About two months later Calcium hydroxide paste was removed and the canal was resealed with new Calcium hydroxide paste. After four months the canal was sealed permanently with guttapercha and zinc oxide-eugenol sealer. The root canals of the lower left premolars were irrigated every week with 3.5% NaOCl solution for and half month. And the canals were sealed with gutta-percha and ZOE sealer. Preventive endodontic treatment for the lower right first premolar was undertaken.

• 대한치과교정학회지
• /
• 제52권5호
• /
• pp.354-361
• /
• 2022

Objective: To analyze the overall treatment effects in terms of the amount of uprighting with changes in the three-dimensional positions of the mandibular posterior teeth after applying the biocreative reverse curve (BRC) system. Methods: Thirty-four patients (mean age, 20.5 ± 8.56 years) were treated using the BRC system (mean period, 8.17 ± 2.19 months). Cone-beam computed tomography was performed before treatment and after treatment with the BRC system. The three-dimensional movement of each tooth was analyzed in the coordinate system at points on the crown and root apex. A paired t-test was used to analyze the treatment effects of the BRC system. Results: The application of the BRC system spanning from the first premolar to the second molar resulted not only in buccal and distal uprighting, but also in increased buccal and distal tipping of the teeth. The premolars and the first molar were extruded, and the second molar was intruded. Conclusions: When the BRC system is applied, simultaneous distal and buccal uprighting of the premolars and molars can be achieved bilaterally using a temporary skeletal anchorage device without unnecessary movement of the anterior teeth.

• 대한치과교정학회지
• /
• 제26권6호
• /
• pp.691-703
• /
• 1996

Three-dimensional finite element model was made from adult skull to find desirable direction of retraction force to treat skeletal class II malocclusion. The retraction force of 400g was applied to the first molar. The direction of the force application was $23^{\circ}$ downward, parallel, $23^{\circ}$ upward and $45^{\circ}$ upward to the occlusal plane. The stress distribution and the displacement within the maxilla were analyzed by three-dimensional finite element method. The findings obtained were as follows: 1. Maxillary first molar was displaced posteriorly and inferiorly in $23^{\circ}$ downward, parallel, $23^{\circ}$ upward retraction but it was displaced posteriorly and superiorly in $45^{\circ}$ upward retraction. 2. ANS, A point and prosthion were moved posteriorly and inferiorly and pterygomaxillary fissure was moved posteriorly and superiorly. Clockwise rotation of maxilla occurred when retraction force was applied. 3. The degree of clockwise rotation of maxilla was greatest when the force was applied $23^{\circ}$ upward to the occlusal plane and was least when the force was applied $23^{\circ}$ downward to the occlusal plane. 4. Large tensile stress appeared in maxillary first molar and alveolar bone and the infraorbital region of maxilla when the force was applied $23^{\circ}$ downward to the occlusal plane. Tensile stress was smaller as the direction of force move upward. 5. Large compressive stress was appeared in maxillary first molar and infraorbital region in $45^{\circ}$ upward case and large compressive stress occurred in the posterior part of maxilla as the retraction force was upward.

• 대한치과교정학회지
• /
• 제45권4호
• /
• pp.190-197
• /
• 2015

Objective: The aim of the study was to analyze the prevalence and distribution of ectopic eruption of the permanent maxillary first molar (EEM) in individuals scheduled for orthodontic treatment and to investigate the association of EEM with dental characteristics, maxillary skeletal features, crowding, and other dental anomalies. Methods: A total of 1,317 individuals were included and randomly divided into two groups. The first 265 subjects were included as controls, while the remaining 1,052 subjects included the sample from which the final experimental EEM group was derived. The mesiodistal (M-D) crown width of the deciduous maxillary second molar and permanent maxillary first molar, maxillary arch length (A-PML), maxillomandibular transverse skeletal relationships (anterior and posterior transverse interarch discrepancies, ATID and PTID), maxillary and mandibular tooth crowding, and the presence of dental anomalies were recorded for each subject, and the statistical significance of differences in these parameters between the EEM and control groups was determined using independent sample t -tests. Chi-square tests were used to compare the prevalence of other dental anomalies between the two groups. Results: The prevalence of maxillary EEM was 2.5%. The M-D crown widths, ATID and PTID, and tooth crowding were significantly greater, while A-PML was significantly smaller, in the EEM group than in the control group. Only two subjects showed an association between EEM and maxillary lateral incisor anomalies, which included agenesis in one and microdontia in the other. Conclusions: EEM may be a risk factor for maxillary arch constriction and severe tooth crowding.

• 대한치과교정학회지
• /
• 제48권5호
• /
• pp.339-345
• /
• 2018

Objective: The purpose of this study was to clarify the effects of continuous force application for extrusive tipping movement and occlusal interference on periapical root resorption in the rat mandibular first molar. Methods: We constructed an appliance comprising a titanium screw implant with a cobalt-chromium post as the anchorage unit and a nickel-titanium closed coil spring (50 cN) as the active unit. Force was applied on the mandibular left first molar of rats for 8 (n = 10) and 15 days (n = 10; experimental groups), with the tooth in occlusion. Five rats were included as a non-treated control group to examine the body effect of the appliance. Active root resorption lacunae, identified using tartrate-resistant acid phosphatase, were evaluated in terms of the length, depth, and area. Results: The rat mandibular first molars were mesially tipped and extruded in the occlusal direction. This mesio-occlusal tipping movement and occlusion resulted in the formation of a compression zone and active root resorption lacunae in the distoapical third of the distal roots. However, there was no significant difference in the amount of root resorption between the two experimental groups. The control group did not exhibit any active root resorption lacunae. Conclusions: Periapical root resorption was induced by continuous extrusive tipping force and occlusal interference in rat mandibular molars. These data suggest that we orthodontists had better take care not to induce occlusal interference during our orthodontic treatment.

• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.77-90
• /
• 1990

The purpose of this study was to compare the amount of the vertical pin opening of $33^{\circ}$ resin and $0^{\circ}$ resin teeth during processing and to determine whether the changes in tooth contacts by using articulation ribbon and T-Scan system follow any identifiable pattern, and to determine if there is any correlation between the changes in tooth contacts and the amount of the vertical pin opening after processing. Through statistical analyses on the data from this study, the following conclusions were obtained. 1. The amounts of the vertical pin opening were 0.78m, 0.87mm for $0^{\circ}$ teeth and $33^{\circ}$ teeth, respectively. But there was no significant difference between them. 2. The total number of contact points recorded by articulating ribbon after processing was decreased to 442.5% of that before processing. 3. The mean values for the number of contact points per tooth recorded by articulating ribbon after processing were 4.3 for the second molar, 3.8 for the first molar, 1.3 for the second premolar, 0.8 for the first premolar. The reduction of contact points per tooth became greater moving in an anterior direction. 4. The correlation between the reduction of contact points and the amount of the pin opening after processing was not significant. 5. The mean values for the numbers of contact points per tooth recorded by T-Scan system after processing were 2.2, 2.5, 1.0, and 0.5 at the second molar, the first molar, the second premolar, and the first premolar, respectively. 6. The correlation between the number of contact points by using articulating ribbon and TScan system after processing was not significant.