• Journal of Ocean Engineering and Technology
• /
• v.19 no.1 s.62
• /
• pp.33-38
• /
• 2005

It has been well documented that plate forming is one of the most important processes in shipbuilding. In the most shipyards, the line heating method is primarily used for plate forming. Since the heating process is carried out for the curved plate and not for the flat plate, a curvature effect on the final deformation must be considered in deriving the simplified prediction models for deformation. This paper investigates the effect of curvature along the heating line on the deformation of the plate. First of all, results of numerical analysis are compared with these of a line-heating test, to justify the elasto-plastic analysis procedure for the present study, which shows good agreement. Then, the present numerical procedure is applied to flat and curved plate models, to investigate the curvature effect on the heat transfer characteristics and deformation by line heating.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.269-274
• /
• 2008

The Seoul subway is acting the center of public transportation after the opening of the first line on August 15, 1974. and the subway line of the DC traction system is running and building to the ninth line. However, the main insulation parts used in overhead contact line are now imported from overseas products. Therefore, this paper considers domestic manufacture technology, supply easiness and economic effectiveness of insulation products and reviews the safety of support insulator used in rigid conductor line, stem insulator used in movable bracket and AC/DC different phase section insulator that localization development is necessary.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.55-59
• /
• 2022

This paper introduce Renewable Energy forecasting technology, which is a part of renewable management system. Then, calculation method of dedicated transmission line's meteorological data to forecast renewable energy is suggested. As the case of dedicated transmission line, there is only power output data combined the number of renewable plants' output that acquired from circuit breakers. So it is need to calculate meteorological data for dedicated transmission line that matched combined power output data. this paper suggests two calculation method. First method is select the plant has the largest capacity, and use it's meteorological data as line meteorological data. Second method is average with weight that given according to plants' capacity. In case study, suggested methods are applied to real data. Then use calculated data to Renewable forecasting and analyze the forecasting results.

• Journal of Korean Academy of Nursing
• /
• v.33 no.1
• /
• pp.130-137
• /
• 2003

Purpose: The purpose of this study was to examine the effects of Self-Development training on the Human Relationship and Intrinsic Motivation for first-line nurse managers. Method: This was an empirical study on the Human Relationship and Intrinsic Motivation of Self Development Training. The researcher developed a new Self-Development Training Program, and the two-hour long training session was performed twice a week for each group. The program was performed for 4 session in two weeks. The subjects consisted with 24 nurse managers from C University Hospital in Seoul, Korea. The subjects were divided into two groups for the training. Two weeks before and 4 weeks after the training, subjects completed questionnaires that measured Human Relationship and Intrinsic Motivation. Analysis was completed by using SPSS PC 10.0 for percentile, mean, standard deviation and paired t-test. Result: The results of this study showed that Self-Development Training Program resulted in a significant effects on the Human Relationship. But the Intrinsic Motivation was not significantly affected by the program. Conclusion: This Self-Development training program had a positive effect on the Human Relationship and Intrinsic Motivation.

• Korean Journal of Human Ecology
• /
• v.7 no.3
• /
• pp.35-48
• /
• 2004

In this study, by determining lower limb movements which cause significant changes in body surface lines, body parts with the greatest maximum expansion and contraction rate respectively were illustrated in descending order. Using unmarried female university students aged 18 - 24 as subjects, a total of 32 body surface categories (15 body surface lines and 17 body surface segment lines) were measured in one static and 9 movement poses. In particular, expansion and contraction levels and rates were measured and used in the analysis. The analysis first involved the calculation of the average measurement per body part in body surface line in static pose as well as of the average expansion and contraction levels and rates in 9 lower limb movements. Two-way MANOVA and multiple comparison analysis (Tukey) were conducted on movements and individual somatotypes regarding measurement per body part and expansion and contraction rates. Movements which cause measurements of body surface lines differed significantly in body surface line in static pose versus in movement were then identified. Among average expansion and contraction rates in such movements, maximum average expansion and contraction levels, maximum average expansion and contraction rate, and classes of expansion and contraction rate were determined per body part. The results of this study are as follows. First, 5 lower limb movements; F2, F5, F6, F7, F8, which caused significant changes in body surface lines were determined and illustrated in table 4. Second, the levels, rates, and classes of expansion and contraction rate per body part are illustrated in Tables 5 and 6. Body parts with the greatest maximum expansion rate were, in descending order: upper segment of center back leg line, upper segment of inner leg line, middle segment of center front leg line, posterior crotch length, anterior knee girth, anterior thigh girth, center back leg line, girth at crotch height, anterior midway thigh girth, hip girth, anterior crotch length, knee girth, waist girth, inner leg line, thigh girth, and crotch length. Those with the greatest maximum contraction rate were, in descending order: anterior crotch length, upper segment of center front leg line, lower segment of center back leg line, center front leg line, and posterior thigh girth. The maximum expansion rates and maximum contraction rates, which ranged from 2.05 to $35.95\%$ and from -0.20 to $-30.16\%$ respectively, were classified per body part into 4 ABCD classes. The body part with maximum expansion was the upper segment of the center back leg line at vertical body surface line, expanding by $35.95\%$ or 16.03cm in F5 flexion movement. In contrast, the body part with maximum contraction was the anterior crotch length at vertical body surface line, contracting by $-30.16\%$ or -10.54cm in F5 flexion movement. Both, however, were the body parts to expand or contract the most among all horizontal and vertical body surface lines.

• International Commerce and Information Review
• /
• v.5 no.2
• /
• pp.3-17
• /
• 2003

This paper examined a e-Business utility of on-line shopping mall firms. Based on the literature review and cases study, the following results were found. First, in e-business policy, it was found that partnership between government and market are very important to e-business utility. Second, e-CRM of on-line shopping mall firms should be considered web site design based on commodity, cafe based on experience and information shares, and transaction confirm service. Third, B2C e-commerce model should be contained firm-specific force, customer oriented force, social force, and technology force.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.1
• /
• pp.1-6
• /
• 2004

In this paper, we present the new method for joint aspect inspecting system. We use the image processing and laser maker for light source. We can find the matrial joint status through processing the line pattern which is made by laser maker. To get the line pattern, in first, we did the preprocess of threshold. If the shape of line had over two segments, then the joint status is abnormal. We show our system efficency by experiment on tire facility.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2002.05a
• /
• pp.205-208
• /
• 2002

The vericut is one of the best CAM application for manufacturing data verification system. It is much applied in most manufacturing company for checking the manufacturing work. Using it a off-line manufacturing system is connected for on-line working on local area network. First, we choose the serial communication to chain an off-line manufacturing system and a personal computer which link with the server running the vericut.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.207-216
• /
• 1996

This paper develops an algorithm for throughput of a 3-stage flow line with job inspection stations, limited buffer capacity, and exponential processing times. Each stage consists of a single workstation, and an infinite number of jobs always waits in front of the first workstation. Blocking may occur when a processed job is waiting at one workstation for another workstation to become available. Numerical example results provide insights into the problems related to quality inspection and measure of performance of flow lines.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.41-46
• /
• 1990

In the existing robot programming methods, off-line method becames important role of programming because of improvement of hardware and software of PC. The purpose of this study is to develop practical robot programming system for polishing task using PC. In the first place, we have investigated the existing robot programming systems, and derived the requirement of this programming system from the existing systems. And we have decided the structure of this system. After that, we have developed this system. Using Windows software, this programming system has man/machine interface function. So users can use easily and quickly.