• 한국국방경영분석학회지
• /
• 제18권1호
• /
• pp.74-85
• /
• 1992

Increasing the number of artillery units requires more deployment space in the field operation area. However, there is limited space available in FEBA due to mountainous terrains. Therefore most artillery units cannot occupy enough deployment space which is proposed in the field artillery mannual(FM) to maximize the firing-effectiveness and to minimize the enemy threat. This paper studies the problems of reducing the size of a battery deployment space being applied currently without decreasing the firing-effectiveness of the battery. The optimum size of a battery position is obtained by using Lemus and David's allocation model and Supper Quick II Model which produces the probability of kill data with various input data. The result shows that the battery deployment space can be reduced without decreasing the firing-effectiveness in the example problem.

• 한국CDE학회논문집
• /
• 제19권4호
• /
• pp.316-323
• /
• 2014

This paper proposes the 3D modeling and simulation technique for predicting the integrated performance of combat vehicle. To consider the practical driving and firing condition of a combat vehicle, the full vehicle model, which can define the six degrees-of-freedom of vehicle motion and various firing angles, is developed. The critical design parameters such as the stiffness and damping coefficient of suspension system are applied to construct the analysis model of vehicle. A simple ballistic model, which incorporates the empirical interior ballistic model and the point mass trajectory model, is built to estimate the firing range and the firing recoil force. To predict the integrated performance and analyze the effect of system parameters, MATLAB/SIM-ULINK model of a combat vehicle for performing the real time simulation is also developed. Several simulation tests incorporating the road bump and the firing recoil force are presented to confirm the effectiveness of the proposed vehicle model.

• 한국항공우주학회지
• /
• 제50권4호
• /
• pp.233-240
• /
• 2022

스마트무장은 종말 유도조종을 통해 정밀타격 임무를 수행하는 초소형 유도무기로 미래 전장환경의 신무기체계이다. 하지만 크기로 인한 구조적 제한으로 인해 압전구동 방식의 조종날개를 이용해 제어를 수행하기 때문에 기동력이 작아 유도범위가 제한적이다. 본 논문에서는 스마트무장의 효과도를 높이기 위한 비 표준조건 사격제원 산출 알고리즘을 제안한다. 제안된 알고리즘은 획득한 전장환경 정보를 이용해 표준조건에서의 사격제원을 보정해 비 표준조건의 사격제원을 산출한다. 다양한 조건에서의 수치 시뮬레이션을 통해 제안된 알고리즘의 성능을 검증하였다.

• 한국국방경영분석학회지
• /
• 제23권2호
• /
• pp.155-170
• /
• 1997

Currently, increasing the number of artillery units requires more deployment space in FABA. However, available positions of artillery units in FEBA is limited due to mountainous terrains. Therefore, it is hard to find enough artillery position space in accordance with the field artillery mannual. This paper studies on determination of the size of battery position in order to maximize the firing-effectiveness and to minimize the enemy threat. Also, it studies the possibility of reducing the size of a battery position. The optimum size of a battery position id obtained by using Dantzig's model and Supper Quick II model which produces the probability of kill data with various input data. As a result, it shows that the size of battery position can be reduced without decreasing the firing-effectiveness.

• 한국군사과학기술학회지
• /
• 제15권4호
• /
• pp.458-466
• /
• 2012

We have developed a weapon effectiveness evaluation model for top-attack smart munitions(WEEM/TASM), which is a many on many Monte Carlo Model evaluating the effectiveness of top-attack smart munitions against armoured ground vehicles. In this model the battle is reduced to a one-sided battle situation in that the target vehicles are regarded as being stationary and passive. It can simulate the whole attack process of smart munitions from firing artillery dispenser to sensing and hitting processes after dispense. It can also calculate the probability of kill of each target and the numbers of rounds required to fulfill the degree of damage in statistical manners. In this paper, we describe the basis for our design concepts reflected in the model to simulate the weapon effectiveness of top-attack smart munitions and provide simulation results for an example case.

• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.22-28
• /
• 2003

In the conventional weapon system, such as gun and small arms, it Is a general trend that for maximization of its performance and enhancement of its effectiveness, the firing control system(FCS) is developed and applied with the guns and small arms in the world. The FCS of the small arms for infantry man is composed of a few of sensors for acquisition of input data of FCS, such as range measurement, position sensing of weapon, temperature, etc., computer, displayer and power pack, and also the air burst munition is developed in parallel for the maximization of FCS's effectiveness. Since the flight time setting fuze for the air burst munition is adapted for next me, the measuring device of the muzzle velocity is needed to overcome the variation of muzzle velocity due to producing procedures and the differences of the using temperatures and so maintain the burst position accuracy This paper contained the technical information on the development of the measuring device of muzzle velocity, which designed in compact & light weight configuration with reliability and accuracy.

• 전기학회논문지
• /
• 제66권9호
• /
• pp.1437-1443
• /
• 2017

Electric energy is consumed or regenerated according to an operation of electric rail cars in urban railway power substations. A thyristor dual converter system is used to deal with the electric energy. Since the AC input voltage of power substations is $22.9kV{\pm}10%$, the magnitude of the AC voltage fluctuates according to load conditions, so the secondary side voltage of the DDY transformer also fluctuates. In the thyristor dual converter, the response characteristics of the DC output voltage and the DC output current are changed based on an initial firing angle in the cross mode conversion between the forward mode and the reverse mode. Therefore, this paper proposes the initial firing angle tracking algorithm considering fluctuation of the AC input voltage. The effectiveness of the proposed algorithm is verified by a simulation compared with the conventional algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2183-2185
• /
• 1998

In this paper, we propose a method of designing neural networks using biological inspired developmental and evolutionary concept. The living things are best information processing system in themselves. One individual is developed from a generative cell. And a species of this individual have adapted itself to the environment by evolution. Ontogeny of organism is embodied in cellular automata and phylogeny of species is realized by evolutionary algorithms. The connection among cells is determined by a rule of cellular automata. In order to obtain the best neural networks in the environment, we evolve the arrangement of initial cells. The cell, that is neuron of neural networks, is modeled on chaotic neuron with firing or rest state like biological neuron. A final output of network is measured by frequency of firing state. The effectiveness of the proposed scheme is verified by applying it to navigation problem of robot.

• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.551-560
• /
• 2010

In this paper, we suggest a localization method of factors affecting the accuracy of Air-to-Ground weapon delivery. The proposed method, called FBEL(Factor-Based Error Localization), is based on the fault localization technique widely utilized in the realm of software engineering field. FBEL localizes the major factors affecting the performance of weapon delivery. To analyze the effectiveness and the applicability of FBEL, we applied FBEL to real firing data and got the major factors caused the errors. We expect that the method could contribute to improve the quality of weapon delivery system. We also expect that it may aid improvement of pilot capability greatly, if it is applied to pilot firing training.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.725-730
• /
• 1998

Recently we extended the fuzzy model for rule based systems incorporating an importance factor for each rule. The model permits for both unrestricted as well as non-negative importance factors. We use this extended model to design a fuzzy rule based classifier system which uses both the firing strength of the rule and the importance factor to decide the class label. The effectiveness of the scheme is established using several data sets.