• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.97-102
• /
• 2018

Combat vehicles require high levels of maneuverability, firepower, armor, and operability. A high-performance power system is required for optimal maneuverability. The fuel pump which supplies fuel stably is very important to achieve this. The fuel pump consists of a pump part, a motor part, and a control part. It is equipped with a BLDC motor. Numerous failures of the fuel pump occurred during vehicle operation when exposed to vibration, shock, and high temperature. The cause of failure was confirmed to be stator slip of the BLDC motor. Stator slip is a consequence of the interference loss between the stator and the housing of the motor part in an high temperature environment. The failure of the fuel pump was solved through size control of the motor housing and the stator. We performed vibration testing at high temperature for verification. This study contributes to improving the reliability of combat vehicles.

• 한국군사과학기술학회지
• /
• 제27권3호
• /
• pp.428-435
• /
• 2024

The important factors in the design of the gun propellant are impetus, flame temperature and pressure. In this paper, we considered a nitrocellulose based propellant composition that replaced sensitive NG(Nitroglycerin) with RDX(Cyclotrimethylenetrinitramine) and DEGDN(Diethylene glycol dinitrate) which high energy and low sensitivity. Particle size and content of RDX are the two main factors that affect the burning stability of RDX-based propellants. Among them, the characteristics of the propellant according to the particle size of RDX were confirmed. The relative combustion rate(R.Q., Relative Quickness) of the propellant changed according to the RDX particle size, and internal ballistics of properties of propellant were also varied. The particle size of RDX can be confirmed as a major factor in the combustion and internal ballistics characteristics of the propellant.

• 대한기계학회논문집A
• /
• 제35권1호
• /
• pp.17-24
• /
• 2011

간헐 회전식 약실 계가 화력 대 무장 공간의 비율 관점에서 볼 때 중구경 자동포에 크게 유익하다고 보고되었다. 그러나 약실계의 핵심 부품인 평행 인덱스가 인덱스 터릿에 설치되는 캠종동절의 상대적으로 낮은 횡 강성으로 인하여 비틀림 방향으로 유연해지는 경향이 있으며, 이는 결국 터릿과 약실 사이의 연결 축이 상당한 크기의 비틀림 잔류 진동에 노출되어 탄 장전과 발사 시에 심각한 비정렬 문제를 야기시킬 수 있다. 이러한 맥락에서 본 논문에서는 상기 진동을 억제하는 ER 유체 작동기와 그에 적합한 반능동 제어 알고리듬을 제안하게 되었으며, 전체 계의 수학적 모델링과 컴퓨터 시뮬레이션을 통하여 그 성능이 만족스러움을 입증하였다.

• 산업경영시스템학회지
• /
• 제43권3호
• /
• pp.68-76
• /
• 2020

In a series of recent launch tests, North Korea has been improving the firepower of its missiles that can target South Korea. North Korea's missiles and submarines are capable of threatening targets in South Korea and are likely faster and more covert than the systems previously seen in North Korea. The advanced threats require that ROK Navy should not only detect them earlier than ever but also response quicker than ever. In addition to increasing threats, the number of young man that can be enlisted for military service has been dramatically decreasing. To deal with these difficulty, ROK navy has been making various efforts to acquire a SMART warship having enhanced defense capability with fewer human resources. For quick response time with fewer operators, ROK Navy should improve the efficiency of systems and control tower mounted on the ship by promoting the Ship System Integration. Total Ship Computing Environment (TSCE) is a method of providing single computing environment for all ship systems. Though several years have passed since the first proposal of TSCE, limited information has been provided and domestic research on the TSCE is still in its infancy. In this paper, we apply TSCE with open architecture (OA) to solve the problems that ROK Navy is facing in order to meet the requirements for the SMART ship. We first review the level of Ship System Integration of both domestic and foreign ships. Then, based on analyses of integration demands for SMART warship, we apply real time OA to design architecture for TSCE from functional view and physical view. Simulation result shows that the proposed architecture has faster response time than the response time of the existing architecture and satisfies its design requirements.

• 안보군사학연구
• /
• 통권1호
• /
• pp.71-111
• /
• 2003

The key lessons of the very complex modern war can be dangerously misleading to the outsiders. The efforts trying to draw lessons learned from the Iraq War (OIF : Operation Iraqi Freedom) may be biased by the view of point by Americans, because most of war episodes have been come from the Western media coverage. More serious bias can be committed thanks to the differences of warfighting doctrines and military technology between US forces and ROK forces. However, OIF-fought allied commanders and outside military experts said this campaign exemplified 21st-century warfare: swift, agile and decisive, employing overpowering technology to bring relentless violence to bear in many places at once. Even though the campaign evolved differently than anticipated, allied forces regrouped and regained the initiative remarkably quickly, thanks in large part to a new command flexibility, tied to new technology that made possible the more rapid sharing of data. These factors permitted "new air-land dynamic". The things that compel that are good sensors networked with good intelligence disseminated through a robust networking system, which then yields speed. Speed turns out to be a very important factor for conducting "Rapid Decisive Operations" relied on joint "Mass of Effects". ROK forces facing the heaviest ground threat in the world may learn more from Cold War era-typed US Army 3rd Infantry Division (3ID), which operating considerably beyond existing doctrine. 3ID flew its personnel into Kuwait to meet up with equipment already located in the region as pre-positioned stock. During OIF, the division conducted continuous offensive operations over 230km deep battlespace for 21 days. The lessons learned for ROK army to prepare tomorrow's war may be found from 3ID in its training, command and control, task organization, firepower and battlespace management, and logistics.

• 한국정보통신학회논문지
• /
• 제24권4호
• /
• pp.529-535
• /
• 2020

적군의 화력에 대비하여 사방이 철갑으로 둘러싸인 장갑차에서 조종수의 외부시야 확보가 필수적이다. 이를 위하여 차량에 360도 회전 가능한 감시카메라를 장착한다. 이 때 헬멧을 착용한 조종수의 머리 방향을 인식하여 외부의 카메라도 정확하게 같은 방향으로 회전하도록 하는 것이 관건이다. 본 논문에서는 MEMS 기반의 AHRS 센서와 조도 센서를 사용하여 기존의 광학적 방식이 가지고 있는 단점을 보완하고, 저렴하게 구현하는 방안을 소개한다. 핵심 아이디어는 카메라의 위치에 장착된 센서와 헬멧에 장착된 센서가 검출하는 오일러 각의 차이를 이용하여 카메라의 방향을 설정하고, 센서의 드리프트 오차를 제거하기 위해 수시로 조도 센서로 보정하는 것이다. 구현된 시작품 통하여 조종수가 바라보는 방향으로 카메라의 방향이 정확하게 일치되는 것을 보여줄 것이다.

• 한국산학기술학회논문지
• /
• 제19권1호
• /
• pp.566-576
• /
• 2018

우리 군의 무기체계는 강력한 화력과 다양한 기능을 보유하고 있으며, 이에 따라 무기체계 신뢰도 예측을 통한 품질 향상의 중요성 역시 점점 커지고 있다. 현재 우리 군의 무기체계 신뢰도 예측은 무기체계를 구성하는 부품들의 신뢰도들의 단순 합계를 통해 이루어지기 때문에 정확한 신뢰도 산출이 어렵다. 따라서 군은 신뢰도 향상을 위해 다양한 연구를 수행할 필요가 있다. 최근 다양한 산업에서 축적된 데이터를 활용한 많은 연구가 시도됨에 따라, 방위산업에서도 축적되고 있지만 활용되지 않은 다크(Dark) 데이터에 관한 분석을 시도하고 있다. 특히, 방위산업의 후속군수지원 단계는 무기체계의 신뢰도 향상을 위한 후속군수지원(PLS) 데이터를 활용할 필요가 있다. 본 연구는 부품단위의 기존 신뢰도 예측 방법에 대한 현황과 문제점을 검토하고, 후속군수지원의 결함 데이터의 적용방안을 제시한다. 이로 인해 무기체계 개발 시 신뢰도 예측의 정확성과 품질 향상에 도움이 될 것으로 기대한다.

• Asia pacific journal of information systems
• /
• 제19권2호
• /
• pp.73-94
• /
• 2009

The general aspects for the future warfare shows that the concept of firepower and maneuver centric warfare has been replacing with that of information and knowledge centric warfare. Thus, some developed countries are now trying to establish the information systems to perform intelligent warfare and innovate defense operations. The C4I(Command, Control, Communication, Computers and Intelligence for the Warrior) systems make it possible to do modern and systematic war operations. The basic idea of this study is to investigate how TAM(Technology Acceptance Model) can explain the acceptance behavior in military organizations. Because TAM is inadequate in explaining the acceptance processes forcomplex technologies and strict organizations, a revised research model based upon TAM was developed in order to assess the usage of the C4I system. The purpose of this study is to investigate factors affecting the usage of C4I in the Korean Army. The research model, based upon TAM, was extended through a belief construct such as self-efficacy as one of mediating variables. The self-efficacy has been used as a mediating variable for technology acceptance, and the variable was included in the research model. The external variables were selected on the basis of previous research. The external variables can be classified into following: 1) technological, 2) organizational, and 3) environmental factors on the basis of TOE(Technology-Organization-Environment) framework. The technological factor includes the information quality and the task-technology fitness. The organizational factor includes the influence of senior colleagues. The environmental factor includes the education/train data. The external variables are considered very important for explaining the behavior patterns of information technology or systems. A structured questionnaire was developed and administrated to those who were using the C4I system. Total 329 data were used for statistical data analyses. A confirmatory factor analysis and structured equation model were used as main statistical methods. Model fitness Indexes for measurement and structured models were verified before all 18 hypotheses were tested. This study shows that the perceived usefulness and the self-efficacy played their roles more than the perceived ease of use did in TAM. In military organizations, the perceived usefulness showed its mediating effects between external variables and dependent variable, but the perceived ease of use did not. These results imply that the perceived usefulness can explain the acceptance processes better than the perceived ease of use in the army. The self-efficacy was also used as one of the three mediating variables, and showed its mediating effects in explaining the acceptance processes. Such results also show that the self-efficacy can be selected as one possible belief construct in TAM. The perceived usefulness was influenced by such factors as senior colleagues, the information quality, and the task-technology fitness. The self-efficacy was affected by education/train and task-technology fitness. The actual usage of C4I was influenced not by the perceived ease of use but by the perceived usefulness and selfefficacy. This study suggests the followings: (1) An extended TAM can be applied to such strict organizations as the army; (2) Three mediation variables are included in the research model and tested at real situations; and (3) Several other implications are discussed.

• 한국유통학회지:유통연구
• /
• 제17권4호
• /
• pp.81-101
• /
• 2012

본 연구는 프랜차이즈 가맹본부와 가맹점간의 관계에 주안점을 두고, 가맹본부와 가맹점사업자의 특성이 신뢰와 몰입과 같은 양자간의 관계에 어떠한 영향을 미치는지 살펴보고 이러한 신뢰와 몰입이 재계약의도가 포함된 가맹점의 만족에 어떠한 영향을 미치는지 살펴보고자 하였다. 특히 현재와 같이 시장의 불확실성이 높은 상황에서 시장 불확실성 요인이 가맹본부 및 가맹점 사업자의 특성과 신뢰 및 몰입과의 관계에 어떠한 영향을 미칠 것인지에 대해서도 살펴보고자 하였다. 연구결과 가맹본부의 특성 가운데 가맹본부의 표준화관리는 가맹본부에 대한 가맹점의 신뢰와 몰입을 저해시키는 것으로 나타났고, 가맹본부의 지원은 가맹점의 신뢰와 몰입을 높이는 것으로 나타났다. 그러나 가맹본부의 가맹점에 대한 통제와 인센티브 정책은 가맹본부에 대한 가맹점의 신뢰 및 몰입에 영향을 미치지 못하는 것으로 나타났다. 가맹점사업자의 특성 가운데는 가맹점의 건전한 재무상태와 기업가 정신이 가맹본부에 대한 신뢰와 몰입을 높여주는 것으로 나타났다. 그러나 가맹점사업자의 우수한 사업능력은 오히려 가맹본부에 대한 몰입을 감소시키는 것으로 나타났다. 그리고 가맹본부에 대한 신뢰와 몰입은 가맹본부에 대한 만족을 높여주어 재계약의도를 높이는 것으로 나타났다. 추가적으로 시장 불확실성에 따라 가맹점사업자의 특성이 본부에 대한 신뢰와 몰입에 미치는 효과가 차이가 있을 것으로 생각하였으나, 불확실성의 인식정도에 따라 가맹점 사업자의 특성이 미치는 효과는 유의한 차이가 없는 것으로 나타났다. 이러한 연구결과는 가맹본부가 지속적으로 성장 발전하기 위해서 가맹점에게 시설투자나 마케팅 비용부담을 전가하여 가맹점으로부터 수익을 강제적으로 얻으려 하기 보다는 가맹점의 영업활동이 잘 될 수 있도록 가맹본부가 가맹점을 적극적으로 지원을 해줌으로써 가맹점의 수익이 가맹본부의 수익으로 연결될 수 있게 하는 것이 양자의 발전을 위해 더욱 바람직한 방향임을 보여주는 결과라 할 수 있을 것이다.